test-drb April 2002

test-drb@ccmp.vtda.org

280 participants
1162 discussions

by csmith＠amdocs.com

> -----Original Message----- > From: Zane H. Healy [mailto:healyzh@aracnet.com] > I've no idea how easy it would be, I've never tried to take > my drive apart. > As for making a 'sleave', I don't think you could without one > to go by (even > then I'm not sure). The worst part is the caddies for this > drive are rare > as hens teeth! Well, I haven't tried taking it apart either, but it may be worth mentioning specifically that when you put the clear "sleeve" back into the drive, it almost certainly releases some kind of catch which allows it to lock onto the "cd-holding-insert-thing" and pull the whole thing back out. I would try to find that catch, which is most likely off to the one side or the other (just a guess, since that's probably where I'd put it...), or directly above or below the disk. (like built into the spindle that turns the CD somehow...) If you can get to it, and release it, you ought to be able to pull the disc out. Otherwise, yes, the caddies are kind of difficult to find, but I have two (one for each drive), so you can probably get them. Chris Christopher Smith, Perl Developer Amdocs - Champaign, IL /usr/bin/perl -e ' print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n"); '

23 years, 2 months

Download CD images for RSX-11 and RT-11 Freeware CDs from Tim Shoppa

by mcguire＠neurotica.com

On April 16, Jerome H. Fine wrote: > It took a week of trying, but I have finally downloaded all three CD > images for RSX-11 and RT-11 from: > ftp://ftp.trailing-edge.com/pub/cd-images/ > Note also that the file MD5SUMS seems to contain checksum > values, but I don't know how to use these values or produce them > myself to check if my files are correct. Can anyone help? $ cat > /tmp/foo blah ^D $ md5 /tmp/foo MD5 (/tmp/foo) = 0d599f0ec05cebda8c3b8a68c32a1b47 $ Any reasonably modern BSD-based system should have the md5 program preinstalled. If not, you should be able to find it at ftp://ftp.cerias.purdue.edu/pub/tools/unix/crypto/md5/. See http://www.cert.org/security-improvement/implementations/i002.01.html for more information. -Dave -- Dave McGuire "Mmmm. Big." St. Petersburg, FL -Den

23 years, 2 months

The CommodoreOne is near!

by mcguire＠neurotica.com

Got a little humor impairment problem there, John? -Dave On April 16, John Chris Wren wrote: > Jesus. And people wonder why women have a hard time in the industry. > > --John > > > -----Original Message----- > > From: owner-classiccmp(a)classiccmp.org > > [mailto:owner-classiccmp@classiccmp.org]On Behalf Of Gene Buckle > > Sent: Tuesday, April 16, 2002 9:45 AM > > To: classiccmp(a)classiccmp.org > > Subject: Re: The CommodoreOne is near! > > > > > > > > > > I'd say the biggest problem will be filling all the > > orders. I'd probably > > > > > > be looking for a contract manufacturer in her place. > > > > > > > > Give her time ... Cloning is not quite up to speed yet. > > > > > > > Hmm, can I place an advance order? > > > > > > I do hope you're referring to the *computer*. > > > > > Well that depends. Does the computer come with a Life-Like(tm) Jeri doll? > > *GD&R* > > > > > > g. > > > > > > -- Dave McGuire "Mmmm. Big." St. Petersburg, FL -Den

23 years, 2 months

VAX-11/785 available, act immediately (fwd)

by pat＠cart-server.purdueriots.com

I saw this on another list, thought there might be interest here. On Mon, 15 Apr 2002, Douglas A. Gwyn wrote: > Subj: Vax 11/785 > Date: 4/15/2002 10:03:46 AM Eastern Daylight Time > From: PPSJM(a)prodigy.net > > Hello, > > I just wanted to throw this out and see if anybody has any interest. > We have an opportunity to pick up a complete VAX11/785. > With all the boards in it, it's actually worth a decent amount as scrap > metal. It is currently queued for the scrap heap. > I would buy it and resell it if anyone has an interest. I guess if > anyone is interested make me an offer and I'll see if it's worth it for > me to pick it up.

23 years, 2 months

simh V2.9-5

by healyzh＠aracnet.com

> I just downloaded and built simh V2.9. I was able to boot the > RA90 disk image I created for Charon-VAX. No timeout, full Just to be nit-picky, that would be V2.9-5. > source, with Ethernet support coming. There's supposed to > be a couple of bugs, but I haven't found them yet. Ethernet is coming?!?! When? I could really use ethernet support for the PDP-11 version of SIMH! BTW, how does the speed of the VAX version compare to real hardware? Zane

23 years, 2 months

HP old computer

by mcap＠ns.sympatico.ca

I am looking for the specs for a Hewlett Packard Vectra Vi series 4 5/90 computer. Someone gave me this machine which works fine however getting the darn thing open so I can install a cd rom is another matter. Its like a vault or something. If anyone can find specs for this computer could you please email me the URL to fenwick(a)ns.sympatico.ca Thank you Robb Fenwick

23 years, 2 months

Need Burroughs Tape Spec's

by jrkeys＠concentric.net

UPS delivered my Burroughs tape unit model BU4180 yesterday but it was destroyed. They must have dropped it from a high place as this thing weighs in at almost 80 pounds. Things inside are pretty bad but I would like to try and get it looking nice again, since the boards inside are damaged I do not think I can get it to work again. Does anyone on the list have repair manual for this model? I would like to see how he belts go around the pulleys inside the case. Thanks

23 years, 2 months

BIE model 4410

by pat＠cart-server.purdueriots.com

Does anyone know what this is or want it? It looks somewhat collectable... I'm asking $25 for it, that's how much it'll cost me for the switches and LEDs if I build my own frontpanel instead of re-use this one's. Here's a description, pictures to appear soon on http://purdueriots.com/imgs/ called bie*.jpg >From the date on the back, it looks to have been purchased in '78 or '79. It's a 6800 based system that I picked up at Purdue Salvage for a couple $$. It has 3 IO cards each with a 6821 on it, a MPU card with a 6800, a ROM card, a front-panel card and some other card with (i believe) RAM of some sort on it (chips are Intel P5101L's 22pin DIPs). Front panel has 24 toggle switches w/LEDs (persumably for the IO), a 6digit 7seg display labeled TIME, 7seg labeled FAULT and a pair of 7seg's labeled STEP. On the right, a 2x6 matrix of pushbuttons labelled 0-9 and a pair labeled "S". Next to that, a 2x6 matrix of PBs with LEDs next to them, labeled: STEP BRANCH STEP NO. PROG. START INST. TIME ABORT MASK OUTPUT ABORT ON/OFF INPUT MASK ABORT STEP NO. INPUT ON/OFF CLEAR STEP Along the bottom, there's a row of switches, left to rigth: POWER: Red push-on push-off square switch AUTO/MANUAL: SPST keyswitch EXAM LOAD/RUN: SPST keyswitch PROGRAM: Set of four 'interlocked' buttons (only one is set at a time) 1-4 START: momentary PB RUN, HOLD: interlocked PB's JOG: momentary PB RESET: FAULT, SYST: momentary PB, ALARM: push-on/push-off ABORT: momentary PB The case is rackmount, about 5U or 6U. On the back: 50pin "Amphenol" scsi-style connector. Connected to three IO cards. Power inlet, outlet, fuse SONALERT beeper.

23 years, 2 months

cure equiepement that was in the rain... best practices???

by mcguire＠neurotica.com

On April 15, Sridhar the POWERful wrote: > > Last week I managed to get my hands on 2 vaxstations 4000/60, a Cisco > > MGS, a HP Apollo 700 workstation, Sun Sparcstation 20 (WOW), a VAX 4000-300 > > and a Panasonic 7330. All have varying degree of dampness 8-((. At the > > moment I have them in house dry and warm... should I stuff them in the oven > > at low temperature and force a drying or best let them settle for some time. > > I would carefully rinse them off, taking care not to soak anything that > would be damaged by water. Then I would pat dry with a paper towel and > let dry. I wouldn't stick anything electronic in the oven. Actually it works quite well, at *low* temperatures. Electric ovens work best for this since gas ovens produce tons of moisture. Trouble is, many ovens can't go low enough (~200F or so). I've had good results from sitting stuff atop floor-mounted heater vents in the winter. This obviously works best when the equipment in question has air vents. Over the past ten years or so, I have gotten a *large* quantity of equipment (literally hundreds of computers) that has been out in the rain, sometimes for months. Some of it I use daily even now. Computer stuff (except for floppy and hard drives) tends to deal with it fine, even monitors. Analog stuff like test equipment tends not to fare so well, nor does mechanical stuff like scanners (though my main scanner was indeed out in the rain for about a week; after a little TLC it performs flawlessly). The water doesn't seem to do any harm at all, even with long-term exposure...it's the crap that the water can carry into the equipment, and sometimes corrosion later on. -Dave -- Dave McGuire "Hush and eat your vegetables, young lady!" St. Petersburg, FL - Mr. Bill

23 years, 2 months

cure equiepement that was in the rain... best practices???

by mcguire＠neurotica.com

On April 15, Doc wrote: > > TLC it performs flawlessly). The water doesn't seem to do any harm at > > all, even with long-term exposure...it's the crap that the water can > > carry into the equipment, and sometimes corrosion later on. > > So what can you do with accumulated mineal salts around component > legs? Looks like tin "rust". I tried firm-but-gentle with a stiff > toothbrush, and didn't get anywhere. > I have that MV3100-90 board that I think just needs the corrosion, > which I suspect is conductive, removed. I use Alconox, a trisodium phosphate based cleaner that's very effective. I have a big pile of acid brushes...those little pencil-sized brushes that go for about a dime a dozen. I think they came from MSC, but I don't recall for sure. Their bristles are about 1" long by default, but you can easily trim them down to make them much stiffer. They're good for scrubbing stuff like that...similar to a toothbrush but easier to deal with. -Dave -- Dave McGuire "Hush and eat your vegetables, young lady!" St. Petersburg, FL - Mr. Bill

23 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb April 2002