I have a monitor for a Stardent workstation. It's a re-badge Sony, model
Free for pickup, or 1.2 * cost of shipping to recoup time and trouble if
you want it shipped.
Please respond soon if you are interested as it will be going off for
scrap in a week if there are no takers.
Sellam Ismail Vintage Computer Festival
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
>Subject: VT-180 (Robin) EPROM images?
> From: "Robert Armstrong" <bob at jfcl.com>
> Date: Sat, 10 Mar 2007 20:23:04 -0800
> To: <cctech at classiccmp.org>
> Does anybody have images of the v2.1 Z-80 firmware for the VT-180 (aka
>Robin) ? At least, I think 2.1 was the last version ever released. They
>should be DEC part numbers 23-017E3-00 and 23-021E3-00.
I have enough of them laying around I could supply the actual roms. I've
never imaged them as It's easier to replace the code outright.
Curious why are you looking for them?
Like the Sanyo just yesterday, I have a Compaq SLT/286 portable computer
taking up space. Very nice condition, with power unit, dock, and bag. Any
interest CHEAP? I am located in New York, zip 10512.
Unlike the Sanyo, if there is no interest, I suppose I will just chop this
I am desperately trying to clear out a bedroom to work on it - the bedroom
that ends up being the junk overflow containment chamber. It would
actually be nice to sleep in it sometime.
aw288 at osfn.org
Does anyone have the O/S, Applications, and Diagnostice disks for this
ancient IEEE 488 bus controller (Fluke 1720A)? It used a TI 9900
processor if I remember correctly. The operating system was called FDOS-
a custom effort too I think, distributed on three 5 1/4" floppies. This
is no longer available from anywhere or anyone, including Fluke.
Thanks for any help and/or leads.
I'm still digging. I found more 550 stuff. I think this is everything
that came with the 550. Here's a chance for you 550 owner's to get the
whole set at one shot!
Original DS-DOS box and invoice.
Original Sanyo Easywriter ver 1.3 disk
Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two
original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4
are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1
Original Sanyo disk box with all three original disk of set A, WordStar
and CalcStar and a backup copy of DS-DOS.
Two card board dummy disks used to protect the floppy drives duing shipment.
>A few weeks ago we were talking about the Sanyo 550 series and someone
mentioned one of the alternates operating systems that supported 80 track
drives in the 550. I said that was DS-DOS by Michtron.
> Today I found an old Sanyo disk package with four disks for the 550. One
of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the
other is a disk of misc utilities. The first three are original disks. In
additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that
came with the 550. If anyone wants them, trade me something I can use and
they're all your's.
> does anybody have bits for the TI 960B (not 960A) minicomputer, e.g.
> software, schematics etc. ?
I have some additional material on the 960 that isn't up yet on
bitsavers. The 960 and 980 share some peripheral interfaces.
Did you end up with the 990 system as well?
[I hope this is on-topic; I believe the machine is at least 20 years old]
I have a NEC Spinwriter 5525 printer that is available for the cost of
shipping (free if you pick it up). The printer is a wide carriage and
appears to have a RS232 serial interface. I do not know if the
printer works or not.
The machine is located in Langdon Alberta Canada (postal code is T0J
1X1) which is approximately 10 minutes east of Calgary.
The machine is rather heavy. I estimate 50 pounds or more. If there
is no interest, the machine is headed to the e-waste recycling.
I can send pictures upon request.
Contact by e mail:
i a m v i rt ihatespam u al @ @ @ g ma il . c om <-- remove
spaces and ihatespam
I just joined this mailing list today on the advice of more than one vintage
computing contact. I was wondering if anyone could tell me anything about
the Protec Microsystems PRO-83 Z80 Single-Board Computer. I have conducted
an exhaustive search of the Internet and found only two sites (one from a
surplus store and a picture of it from a museum). I would appreciate any
information available, especially information regarding the power supply and
peripheral devices. Thank you very much.
MSN Photos is the easiest way to share and print your photos:
I have a couple of HPIB cables available at $15 the pair, shipped.
1 HP10833A ~42"
1 HP92220R ~12"
The 92220R has a right-angle connector at one end and the usual
straight connector at the other. (I wonder if the 'R' indicates
a right hand connector?)
First come, first served.
This is a belated response to a post you made here:
happened upon it while doing a 'for fun' search on the net for anything
doing with good ol' Century Data, my employer when I was young. Couldn't
resist responding to the post, even if it was half a year late!
The exerciser that you have is/was for the Trident series of hard disk
drives (predecessor to the Marksman). I was the main (in fact, pretty much
the ONLY) technician at Century Data/Calcomp, for these exercisers back from
the late 1970's to the mid 1980's, when they were phased out. I retired in
Have fun! (BTW, where'd you find one of these dinosaurs??)