I'm still digging. I found more 550 stuff. I think this is everything
that came with the 550. Here's a chance for you 550 owner's to get the
whole set at one shot!
Original DS-DOS box and invoice.
Original Sanyo Easywriter ver 1.3 disk
Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two
original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4
are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1
Original Sanyo disk box with all three original disk of set A, WordStar
and CalcStar and a backup copy of DS-DOS.
Two card board dummy disks used to protect the floppy drives duing shipment.
Joe
>
>A few weeks ago we were talking about the Sanyo 550 series and someone
mentioned one of the alternates operating systems that supported 80 track
drives in the 550. I said that was DS-DOS by Michtron.
>
> Today I found an old Sanyo disk package with four disks for the 550. One
of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the
other is a disk of misc utilities. The first three are original disks. In
additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that
came with the 550. If anyone wants them, trade me something I can use and
they're all your's.
>
> Joe
Hello everyone,
I just joined this mailing list today on the advice of more than one vintage
computing contact. I was wondering if anyone could tell me anything about
the Protec Microsystems PRO-83 Z80 Single-Board Computer. I have conducted
an exhaustive search of the Internet and found only two sites (one from a
surplus store and a picture of it from a museum). I would appreciate any
information available, especially information regarding the power supply and
peripheral devices. Thank you very much.
Rob
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
I have a couple of HPIB cables available at $15 the pair, shipped.
They are:
1 HP10833A ~42"
1 HP92220R ~12"
The 92220R has a right-angle connector at one end and the usual
straight connector at the other. (I wonder if the 'R' indicates
a right hand connector?)
First come, first served.
- don
Does anyone have docs for this beastie? it's an apple-II on a card that
goes into an XT... or does anyone have any interest in it? it's been
sitting on my shelf for ~ 12 years now...
> ----------
> From: John R. Keys Jr.
> Reply To: classiccmp(a)classiccmp.org
> Sent: Friday, February 15, 2002 2:54 PM
> To: classiccmp(a)classiccmp.org
> Subject: Re-finding more items as I open boxes
>
> Found the following while unpacking in the warehouse:
<<<<<clipped>>>>>>
> Took some other goodies home to play with like the 20th Annv. MAC,...
>
---
20th Anniversary Mac? You booger... I may have to grab it when
you're not looking.
;-)
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 90581
Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash
I wonder how long it will be before some fool donates a PDP or some
other piece of kit we hold near and dear to our hearts, to these miscreants.
Sure, it's amusing when it's a 286 being pipe-bombed, but probably not
so much fun (for me, anyway) when they get their hands on an Amiga or a Sol.
It's all fun and games until someone loses an eye...
http://www.letsblowitup.com/default.shtml
I found EK-KDJ1A-UG-001 "KDJ11-A CPU Module User's Guide,"
which might help, because unless my memory fails me, the KDJ
= 11/73.
I didn't immediately find power-up codes in it -- probably
because something like MXV11-B2 or other ROM set issues the
codes.
If I can find an MXV11 doc, I'll post a message. I used to
have one.
Contact me if you want the KDJ11 manual.
runtime(a)wzrd.com
DM
Does anyone know exactly what a Smoke Signal Broadcasting DCB-4E cards are
for? It's and EXORbus card and has a MC6821P and a WD FD1791B-02 LSICs and
a lot so SS TTL ICs on it. Does anyone have data for the card?
Joe
>Message: 9
>Date: Wed, 29 Jan 2003 00:07:02 -0800 (PST)
>Subject: Re: Looking for DEC parts
>From: "Eric Smith" <eric(a)brouhaha.com>
>To: <cctalk(a)classiccmp.org>
>Reply-To: cctech(a)classiccmp.org
>
>> These are the parts we are looking for:
>>
>> 5 pcs. DEC 21-17311-01 or 21-17311-02
>> 2 pcs. DEC 21-17312-00 or 21-17312-01
>> 2 pcs. DEC 57-00001-01
>> 2 pcs. DEC 57-00000-01
>> 2 pcs. DEC 21-15542-01
>>
>> Any luck for us ??
>
>You might be more likely to get a useful response if you told us what
>those parts are. I've got a lot of parts, but I don't have any
>inventory by part number.
Those chips are:
DEC 21-17311-01 or 21-17311-02 = T-11 processor
DEC 21-17312-00 or 21-17312-01 = DC 319 DLART
DEC 57-00001-01 = KEF11 FIS
DEC 57-00000-01 = Ctrl/Data Hybride of 11/23
DEC 21-15542-01 = MMU of 11/23
I have those parts over here, and since both the original poster and myself are
located in Germany, I have already dropped them a line and helped them out.
Frank Arnold
I want to work my Art EPP-2 programmer but i lost the software
google doesn't have what i'm looking for
any of you pherhaps
(its for the 27 and 28 series)
Paul