test-drb September 2001

test-drb@ccmp.vtda.org

256 participants
661 discussions

Wait! There's more including MS-DOS 1.25!!!! was Sanyo MBC-550 (Yuck!) software available

by rigdonj＠intellistar.net

I'm still digging. I found more 550 stuff. I think this is everything that came with the 550. Here's a chance for you 550 owner's to get the whole set at one shot! Original DS-DOS box and invoice. Original Sanyo Easywriter ver 1.3 disk Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4 are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1 Original Sanyo disk box with all three original disk of set A, WordStar and CalcStar and a backup copy of DS-DOS. Two card board dummy disks used to protect the floppy drives duing shipment. Joe > >A few weeks ago we were talking about the Sanyo 550 series and someone mentioned one of the alternates operating systems that supported 80 track drives in the 550. I said that was DS-DOS by Michtron. > > Today I found an old Sanyo disk package with four disks for the 550. One of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the other is a disk of misc utilities. The first three are original disks. In additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that came with the 550. If anyone wants them, trade me something I can use and they're all your's. > > Joe

10 years, 10 months

Quadram Quadboard

by geoffr＠zipcon.net

Does anyone have docs for this beastie? it's an apple-II on a card that goes into an XT... or does anyone have any interest in it? it's been sitting on my shelf for ~ 12 years now...

16 years

Interesting Book: "The Digital Dictionary"

by healyzh＠aracnet.com

Yesterday I finally got a couple books I'd gotten on eBay a couple weeks ago, obviously "VAXcluster Principles" is an interesting book, but I was surprised how good of a book "The Digital Dictionary" is. I got the 2nd Edition (the first was mainly internal use). It's a dictionary of all the different terms that were in use around 1986. As such it contains info on the PDP-10, PDP-11, and VAX, as well as DECmate's, Rainbows, and Professionals. As well as the Apps, Languages, and OS's. Great book if you want to know what a specific term or acronym means. Well worth picking up if you are in to DEC stuff and can find a copy! Zane -- | Zane H. Healy | UNIX Systems Administrator | | healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast | | healyzh(a)holonet.net (alternate) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

21 years, 2 months

Info on the Dynalogic Hyperion

by lbutzel＠home.com

Looking for info on the Dynalogic Hyperion, a "portable" DOS machine manufactures around 1983. At least the one I have is 1983. it was designed and initially built in Ottawa, Canada. Hyperion was acquired in about 1983 by Bytec, who was later bought by I think a Quebec company called Comterm. Anyway, mine has stopped working: The machine still boots but no image is displayed on its 7" diag screen. Hence I am looking for service info and/or persons who have worked on the machine. Any leads would be most appreciated. Leo Butzel Seattle, WA lbutzel(a)home.com

21 years, 2 months

Plato terminal

by dhquebbeman＠theestopinalgroup.com

> This is two years late, but the terminal the original poster describes > sounds like an IST (model 1), a CRT-based CDC product, vintage about 1978. > There was a later edition called the IST-II, also CDC. It had two 8" drives > and a Z-80 CPU, as well as connectivity to CDC PLATO mainframe systems, > either by dialup modem (1200 bps) or multiplexer. Actually, I was the original poster; a reply to me mentioned the terminal you're describing. > The IST is not the oldest PLATO terminal, but it is the oldest that CDC > manufactured, I suspect. Even my PLATO IV (Magnavox, 1971) is not the > oldest, but only the first mass-produced machine. The earliest ones date to > about 1961 and there are probably only two or three still in existence, if > we're lucky enough to have that many. A precursor to these would be Norman > Crowder's Auto-Tutor, vintage about 1958, which has characteristics very > similar to the PLATO terminals (though it is not a computer terminal, it > operates on filmstrip media), and PLATO's mechanisms are said to have been > influenced by this machine. It's one of the mid-70s Magnavox plasma displays I'm looking for... Say, are you able to connect to NovaNET with the magnavox terminal? if so, we should meet for a game of Empire or Avatar some time (although I'm sure you'll wipe me out).... or maybe a more civilized game of chess... Regards, -doug quebbeman

21 years, 3 months

Diablo 3200

by vcf＠siconic.com

On Mon, 14 May 2001, George Leo Rachor Jr. wrote: > Stay of execution on this Diablo 3200..... > > We have bought a bit of time as my wife has convinced them not to hack it > up until I get to see this critter. Cool! > Obviously we have no software for the machine and I'm assuming you don't > either. Actually, I do. I got the original OS disks as well as a bunch of floppies with various bits of accounting type software and useless data. > The computer recycler has agreed not to remove the original components > until it can be determined if the box is usuable in some rudimentry > function as is. (They were going to gut the original components and > replace the guts with something more modern). Silly. Were they planning to use the same CRT and keyboard? I don't know how. If all they wanted was a nice desk for a computer then maybe they should go to Office Depot? > Now the challenge is to find software that might boot the machine up. I can make copies for you. Mine supposedly boots. Here is a picture of mine. http://www.siconic.com/computers/Diablo%203200.jpg Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org

21 years, 7 months

I need an RM03...

by DSEAGRAV＠toad.xkl.com

I need an RM03, preferrably within sane driving distance of Peoria, IL. Having a KS10 as a paperweight is absolutely no fun. I can trade PDP-11 stuff for one, I have all sorts of 11 kit that I'd be more than willing to trade for KS10 stuff. Also, if anyone has the 120V-AC plug that goes in a TM02, I am short one of those as well - I have the 220 volt version (but the rest of the drive is all 120 volt parts; Odd!) Basically, I'm sick of using the KS10 as just emulation validation and I want to get it running. ^_^ -------

21 years, 9 months

Collections vs. accumulations, was Re: How many collectors?

by dhquebbeman＠theestopinalgroup.com

> > > Does anyone know what sort of machine is in the car's > > > onboard controller? A few pictures I've found make them > > > look like PC104's. These machines are hitting zero value > > > quickly and may not last 10 years unless picked up now. > > > > What car? They don't all use the same controllers, you know... > > Want a fuel injection "brain" from a 1968 VW Squareback? Had Bosch come up with EFI already by 1968? Every VW (and Audi & MB, etc) of that vintage that I've seen used CIS, which was a purely mechanical system. I have seen a 1969 Audi Super 90 (wagon) that had an aftermarket Capacitative Discharge Ignition (CDI) System... by 1974, Audis had those as stock, while CIS was still 1 year off... My 1986 Audi 5000 CS Turbo Quattro uses a Motorola 6802-based controller... very simple to upgrade, too.... ;-) -dq

21 years, 10 months

Heath/Zenith stuff

by ajp166＠bellatlantic.net

------Original Message------ From: Ethan Dicks <ethan_dicks(a)yahoo.com> --- Bill Gunshannon <bill(a)cs.scranton.edu> wrote: > Your thinking of the Heath H11 which was in fact an LSI-11/02. But it had It shipped as an LSI-11/03 CPU and heath made memory and IO. My H-11 came with a KDF-11 CPU (11/23), but I don't know if it was shipped that way or if my boss (who bought it new) upgraded it himself. Yep, never shipped with 11/23 (KDF-11A). It was discontinued by then if anything. I have a couple of the Heath serial cards (one unsoldered!), the H-27 disk controller, the 8" floppies and a pile of misc DEC cards (memory, BDV-11 boot card, etc). The heath seriial card was a fairly flexible card copared to the usual DEC DL-11. to debug the H-27 (he never used it). Except for the monsterous holes he blew in the side to mount additional fans, and the holes in the front he added for external console baud rate switches, it resembles its original form once again. The fans and switches were a common mod and handy too. Allison __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

21 years, 10 months

HP Composite Video Interface Card

by fmc＠reanimators.org

"Wayne M. Smith" <wmsmith(a)earthlink.net> wrote: > I am using an HP composite video card (98204A) in a > 9000/200 series and am getting a very small multiple > image on the screen. Is there something special about > HP composite video or is this just a bad card? I've > tried the card in both a 9000/200 and 9000/220 with the > same result. Any ideas? Just a wild guess, but if you have an HP 35731A monochrome monitor, try it with that. That wants composite video but with a horizontal frequency of 30KHz instead of the more usual 15KHz. HP used that on several different systems. There may also be a jumper on the video card to select the horizontal frequency, but the only thing I ever saw this on was the HP Multimode Display Adapter for the Vectra (sort of a combination of the IBM MDA and CGA that was good for confusing "smart" software). -Frank McConnell

22 years

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb September 2001