test-drb January 2002

test-drb@ccmp.vtda.org

303 participants
1201 discussions

Wait! There's more including MS-DOS 1.25!!!! was Sanyo MBC-550 (Yuck!) software available

by rigdonj＠intellistar.net

I'm still digging. I found more 550 stuff. I think this is everything that came with the 550. Here's a chance for you 550 owner's to get the whole set at one shot! Original DS-DOS box and invoice. Original Sanyo Easywriter ver 1.3 disk Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4 are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1 Original Sanyo disk box with all three original disk of set A, WordStar and CalcStar and a backup copy of DS-DOS. Two card board dummy disks used to protect the floppy drives duing shipment. Joe > >A few weeks ago we were talking about the Sanyo 550 series and someone mentioned one of the alternates operating systems that supported 80 track drives in the 550. I said that was DS-DOS by Michtron. > > Today I found an old Sanyo disk package with four disks for the 550. One of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the other is a disk of misc utilities. The first three are original disks. In additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that came with the 550. If anyone wants them, trade me something I can use and they're all your's. > > Joe

10 years, 11 months

Quadram Quadboard

by geoffr＠zipcon.net

Does anyone have docs for this beastie? it's an apple-II on a card that goes into an XT... or does anyone have any interest in it? it's been sitting on my shelf for ~ 12 years now...

16 years, 1 month

Osborne OCC1

by CochraneS＠sgstool.com

I have come across an Osborne model OCC1 Serial # 134033. This unit has the 300 baud modem. It also has 5 1/4 disk with it. (SuperCalc, WordStar, Qbasic) The unit boots up and runs the software but after about 15 to 20 minutes it starts to overheat.(smoke) My question is - What is the selling price for a unit like this and where would be the best place to sell it? Thanks for your help, Steve Cochrane Director of Information Technology SGS Tool Company PO Box 187 Munroe Falls, OH 44262 (330)686.4194 ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.F-Secure.com/

20 years, 11 months

Interesting Book: "The Digital Dictionary"

by healyzh＠aracnet.com

Yesterday I finally got a couple books I'd gotten on eBay a couple weeks ago, obviously "VAXcluster Principles" is an interesting book, but I was surprised how good of a book "The Digital Dictionary" is. I got the 2nd Edition (the first was mainly internal use). It's a dictionary of all the different terms that were in use around 1986. As such it contains info on the PDP-10, PDP-11, and VAX, as well as DECmate's, Rainbows, and Professionals. As well as the Apps, Languages, and OS's. Great book if you want to know what a specific term or acronym means. Well worth picking up if you are in to DEC stuff and can find a copy! Zane -- | Zane H. Healy | UNIX Systems Administrator | | healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast | | healyzh(a)holonet.net (alternate) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

21 years, 3 months

Info on the Dynalogic Hyperion

by lbutzel＠home.com

Looking for info on the Dynalogic Hyperion, a "portable" DOS machine manufactures around 1983. At least the one I have is 1983. it was designed and initially built in Ottawa, Canada. Hyperion was acquired in about 1983 by Bytec, who was later bought by I think a Quebec company called Comterm. Anyway, mine has stopped working: The machine still boots but no image is displayed on its 7" diag screen. Hence I am looking for service info and/or persons who have worked on the machine. Any leads would be most appreciated. Leo Butzel Seattle, WA lbutzel(a)home.com

21 years, 3 months

Plato terminal

by dhquebbeman＠theestopinalgroup.com

> This is two years late, but the terminal the original poster describes > sounds like an IST (model 1), a CRT-based CDC product, vintage about 1978. > There was a later edition called the IST-II, also CDC. It had two 8" drives > and a Z-80 CPU, as well as connectivity to CDC PLATO mainframe systems, > either by dialup modem (1200 bps) or multiplexer. Actually, I was the original poster; a reply to me mentioned the terminal you're describing. > The IST is not the oldest PLATO terminal, but it is the oldest that CDC > manufactured, I suspect. Even my PLATO IV (Magnavox, 1971) is not the > oldest, but only the first mass-produced machine. The earliest ones date to > about 1961 and there are probably only two or three still in existence, if > we're lucky enough to have that many. A precursor to these would be Norman > Crowder's Auto-Tutor, vintage about 1958, which has characteristics very > similar to the PLATO terminals (though it is not a computer terminal, it > operates on filmstrip media), and PLATO's mechanisms are said to have been > influenced by this machine. It's one of the mid-70s Magnavox plasma displays I'm looking for... Say, are you able to connect to NovaNET with the magnavox terminal? if so, we should meet for a game of Empire or Avatar some time (although I'm sure you'll wipe me out).... or maybe a more civilized game of chess... Regards, -doug quebbeman

21 years, 4 months

VAX 11/730 Problem

by ms＠silke.rt.schwaben.de

Hello to all VAXenfolks, i do have a problem with a VAX-11/730 that i have reconstructed (cleaned, resoldered, replaced cable, everything. Pictures on www.vaxcluster.de. Yes, i am a bit proud of it... But sorry for the bad web-page design!) over the last few months. It is now willing to boot and tries to load it's microcode tape from the TU-58 drives. I even have a microcode tape which looks like it could be still readable. But the TU-58's are so battered that i have not been able to read the tape. I have repaced the rubber rollers, but the read/write-heads look, ummm, bad! I have found somewhere some TU-58 simulator software for DOS which looks like a promising alternative; i would place a mini-DOS-computer inside a VT-102 and route some additional cables to the VAX and bee fine. BUT: How do i get the contents of the microcode tape of the tape, into a DOS file without access to a working TU-58? Is someone on this list able to read the tape? Has someone already made a tape image i could just use? I mean, i have a original DEC tape, with serial number and all. I might even come up with a license document, if i search long enough... Any help would be greatly welcomed. This old lady is just to beautifull to use it as an electric heater only... Thank you ms -- Michael Schneider email: ms(a)silke.rt.schwaben.de Germany http://www.vaxcluster.de People disagree with me. I just ignore them. (Linus Torvalds)

21 years, 4 months

Anything special about converting VAX 11/780 to single phase?

by gunther＠aurora.regenstrief.org

Hi, just to be sure, I would simply put all three phases on the same single phase. Are there any problems with that? The VAX 6000 is much pickier, but the VAX 11 and everything having the simple power distribution box should be fine, right? thanks, -Gunther -- Gunther Schadow, M.D., Ph.D. gschadow(a)regenstrief.org Medical Information Scientist Regenstrief Institute for Health Care Adjunct Assistant Professor Indiana University School of Medicine tel:1(317)630-7960 http://aurora.regenstrief.org

21 years, 6 months

Almost on topic - Cassette I/O

by bfranchuk＠jetnet.ab.ca

I am building a FPGA ( Field programmable gate array ) computer in the style of the early computers that had a front panel and TTY for I/O. While I don't have have a front panel working the Hardware serial bootstrap does work on my prototype. Since I have a few LOGIC cells left in my FPGA to play with I was thinking adding a cassette interface. Does anybody know of schematics on the web that I can get ideas from. Ben Franchuk. -- Standard Disclaimer : 97% speculation 2% bad grammar 1% facts. "Pre-historic Cpu's" http://www.jetnet.ab.ca/users/bfranchuk Now with schematics.

21 years, 7 months

Diablo 3200

by vcf＠siconic.com

On Mon, 14 May 2001, George Leo Rachor Jr. wrote: > Stay of execution on this Diablo 3200..... > > We have bought a bit of time as my wife has convinced them not to hack it > up until I get to see this critter. Cool! > Obviously we have no software for the machine and I'm assuming you don't > either. Actually, I do. I got the original OS disks as well as a bunch of floppies with various bits of accounting type software and useless data. > The computer recycler has agreed not to remove the original components > until it can be determined if the box is usuable in some rudimentry > function as is. (They were going to gut the original components and > replace the guts with something more modern). Silly. Were they planning to use the same CRT and keyboard? I don't know how. If all they wanted was a nice desk for a computer then maybe they should go to Office Depot? > Now the challenge is to find software that might boot the machine up. I can make copies for you. Mine supposedly boots. Here is a picture of mine. http://www.siconic.com/computers/Diablo%203200.jpg Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org

21 years, 8 months

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb January 2002