test-drb July 2015

test-drb@ccmp.vtda.org

176 participants
257 discussions

by sales＠elecplus.com

Mainframes and other stuff Recycle center in NC is willing to save out "stuff" for people. No, no one can go in the back and scrounge. No, he does not want a lot of emails from people. Yes, he gets big blue and orange and beige 6 foot tall OLD mainframes in all the time. They squash them at the moment. Yes, he will package small orders, and will properly palletize larger orders. Local pick up will be available after the new year. So, if u can send me a picture with description and some part numbers, along with what you want to pay, I will consolidate things and make arrangements. Please don't ask for specific boards from DEC; they don't want to go into that much detail. QBUS will mean nothing to him. Big orange cabinet that says xxxxx is much more likely to get saved. They are moving to new warehouse 1st of the month, so all this will start happening after the 1st of the year. Cindy Croxton Electronics Plus 1613 Water Street Kerrville, TX 78028 830-792-3400 phone 830-792-3404 fax sales at elecplus.com AOL IM elcpls

5 years, 2 months

Documation card readers for sale

by ball.of.john＠gmail.com

About six months ago I struck a deal with a place down in California for four Documation M1000's that I've been able to tell so far they all work but I really don't have space for more than one. I've been trying to sell them at a loss for months now over on the Vintage Computer Forums and Nekochan (if you got here you'll find pictures) but no bites. I swear there were people out there that were looking. Where did you folks go? Might anyone here be interested? I absolutely refuse to put them on the curb. -John

5 years, 4 months

TU58 tape formatter (was Re: rebuilding DC100A cartridges?)

by shadoooo＠gmail.com

Hello. I have a VAX730 with both TU58 drives destroyed (capstan melted, need replacements). I also have a bunch of cassettes, but unfortunately all seem to have problems with the bend and/or bad spots on the tape. Possibly I would try to replace the broken bands (if I find a source) and/or replace the magnetic tape when damaged (I was thinking to try with audio cassette tape, don' t know if metal oxide high density tape could be good for it). Anybody has some information about the coercivity of original DEC TU58 tape? One problem indeed is the need of reformatting the tape, but: if I can emulate the TU58 drive using a serial, would it be possible to send raw commands to the drive using the serial and a PC? Andrea PS-If possible, some good-condition cassette would be very useful to me too. I'm located in Italy.

5 years, 5 months

Logic Analyzer software for the HP-IB/RS-232 bus pre-processor HP 10342B

by marc.verdiell＠gmail.com

This has probably been asked before, but does anyone have the software package that came with the HP-IB/RS232 HP10342 bus pre-processor for the HP1650 series Logic Analyzer (actually I have a 1670G)? It should have a config file and an inverse assembler file. I'm interested in the HP-IB files. Can't find it anywhere. - Marc

5 years, 10 months

Jobs, McGowan and Olsen

by dm561＠torfree.net

An interesting 3 hours on PBS last night: - 'Steve Jobs - One Last Thing': No description necessary. - 'Long Distance Warrior': McGowan/MCI's David & Goliath battle with AT&T and disastrous merger with Worldcom. - 'Digital Man/Digital World': Ken Olsen/DEC's growth and ultimate decline. (No doubt everyone here except myself had already seen this one ;-) Interesting comparison of the different styles and personalities of three men who profoundly influenced the tech world of today and their companies. Thoroughly enjoyed it. m

6 years

Does anyone have docs for a Ventel brand MD212-plus modem?

by ethan.dicks＠gmail.com

Hi, All, A friend of mine just returned a modem he got from me decades ago, a Ventel MD212-plus. It's an early-1980s non-AT-command-set autodialling modem. The settings are adjusted via a pair of 10-pin DIP switches accessible from the back. I've checked the web and bitsavers. So far, all I've found is some old Usenet articles and a couple of pictures, but no manual or jumper guide. One "feature" is that it lacks a modular jack to plug into the phone system. Fortunately, my friend kept the proprietary DA15 cable. I've never seen that choice of connectors on any other modem. Does anyone have any Ventel docs? Thanks, -ethan

7 years, 2 months

Digital archiving tools

by wmaddox＠pacbell.net

Many of us maintain large collections of bits that we'd like to preserve over a long time, and distribute, replicate, and migrate via unreliable storage media and networks. As disk sizes (and archive sizes) have increased, the probability of corruption undetected or uncorrected by the mechanisms normally built into disk drives, network protocols, and filesystems has increased to a level that warrants great concern. I would be interested to know if there exists an archive format that has the following desirable properties: 1) It is well-documented, and relatively simple, to facilitate its implementation on many platforms present and future. 2) It supports some degree of incremental updating, but need not be particularly efficient about it. An explicit compaction operation is preferable to an overly complex format. It is adequate to use append-only strategies appropriate for write-once media. 3) Insertion and extraction of files, copying of the archives, and other archive-manipulation utilities support end-to-end verification that identical bits have been stably recorded to the media, bypassing or defeating platform-level or hardware-level caching mechanisms. Where this is not possible, the limits must be carefully delineated, with some basis for determining the properties of the platform and certifying reliability properties where possible. 4) The format should provide for superior error detection capability, designed to avoid common failure modes with mechanisms typically used in hardware. For example, use a document-level cryptographic checksum rather than a block-level CRC. 5) The format should include a high degree of internal redundancy and recoverability, say, along the lines of a virtual RAID-array. Just as biological organisms constantly correct DNA transcription errors, the idea is to have a format that is robust across long-term exposure to imperfect copying and transmission channels. Does anything like this exist? --Bill

7 years, 5 months

ROM dumps of Intel MDS-2 IOC

by fulivi＠tiscali.it

Hi everyone, I'm looking for the images of ROMs installed on the IOC (I/O controller) board of Intel MDS-2 development systems. In particular I'm looking for the content of the character generator ROM (A19-2708) and of firmware ROMs (A50 to A53-4x2716). So far I had no success in googling them. My goal would be to contribute a good emulation of MDS systems to MESS, especially for what regards the look of the video terminal. Well, this is the plan, when "real-life" is not inteferring too much... Thanks a lot. -- F.Ulivi

7 years, 6 months

WTD: S100 Static RAM card

by philip＠neoncluster.com

Hi all, I?ve been struggling getting a 64k Dynamic RAM card back up and working in my IMSAI 8080. In fact I?m giving up on the DRAM card in this system and have decided to start looking for a SRAM card that can get the IMSAI up to 56k. In terms if SRAM cards, I presently have: 2 x Problem solver RAM16 cards - both seem to be working. 2 x 8K RAM cards - both seem to be working. Less cards generating heat, and putting stress on the old power supply is obviously best, so I?d be looking for either: - 1 x 16k SRAM card (for a total of 4 RAM cards (3 x 16k + 1 x 8k) in my system). A PSS RAM16 would be preferred for sake of consistency, but obviously not crucial. - 1 x 32k SRAM card (for a total of 3 RAM cards (1 x 32k, 1 x 16k + 1 x 8k) in my system) - 1 x 64k SRAM card that can have the last 8k bank turned off I would love to hear from anyone with one of the above cards who would be willing to pass it on. Much thanks for your time. Best regards Philip

7 years, 10 months

Scraping DEC Equipment

by dm561＠torfree.net

----- Original Message ----- > Date: Sun, 22 May 2011 22:56:32 -0500 > From: Daniel Seagraves <dseagrav at lunar-tokyo.net> > Subject: Re: Scraping DEC Equipment > To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk at classiccmp.org> > Message-ID: <C7A98127-DFF4-41B1-A6AF-5DFCA234D286 at lunar-tokyo.net> > Content-Type: text/plain; charset=us-ascii > > I need a tractor feed assembly for a LA100, are the ones on the 120 > compatible? ----- Reply: Apparently not, but I might have one for an LA100. mike

7 years, 10 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb July 2015