test-drb January 2015

test-drb@ccmp.vtda.org

175 participants
253 discussions

by bqt＠softjar.se

Well, it's been a long time project, but I'm happy to finally announce a more public initial release of TCP/IP for RSX-11M-PLUS. This is the result of over 20 years of development. Needless to say, I've been doing a lot of things over the years, and this code have been through four reimplementations over the years. What I now release is something that I believe is a nice and useful piece of software. I am aware of the fact that most people do not use these machines any longer, but if someone actually wants to talk to me about support for this or other RSX software, let me know. Also, feel free to spread this information to anyone who might be interested, anywhere. So - what is in this release? It is a complete implementation of ARP, IP, UDP, and TCP for RSX-11M-PLUS. It has been tested on RSX-11M-PLUS V4.6, but should work on any V4 release. There might be some small tweaks or fixes required, but nothing major. It do require a system with split I/D-space, or else at least the TCP part will not fit. For Unibus machines, it should be possible to run without any additional software except what is in a base RSX distribution. For Q-bus machines, DECnet is required for ethernet networking. The TCP/IP stack can co-exist with DECnet. Some utilities also utilize RMS for file access. A bunch of tools, utilities and libraries are also included. These include: . IFCONFIG network configuration tool. . NETSTAT network information tool. . PING . TRACEROUTE . DNS client . FTP daemon . FTP client . HTTP server . TELNET client (rudimentary) . TFTP client . TFTP server . INET server that can do SINK, ECHO, DAYTIME, QUOTE, and IDENT . NTP client . LPR client that sits in the queue manager (rudimentary) . FORTRAN-77 library . BASIC+2 library . PDP-11 C library The implementation fulfills most of the requirements put forth in RFC 1122. There are a few limitations because of restrictions in the PDP-11, but none of them should really cause any problems. Documentation is still on the thin side, but example configs are also provided, along with installation scripts. A bunch of test programs and example programs are also included, as well as the sources of all tools and libraries. The TCP/IP stack itself only comes in binary form. All tools are also included precompiled in the distribution, so an installation only have to build the stack itself for your system, and then you should be ready to go. The API only have a slight resemblance to the Unix sockets API. However, if someone sits down to write code to use TCP/IP under RSX, I'm sure they will discover that it is extremely easy to use the libraries, or the basic functions. The TCP/IP implementation is mostly written as device drivers. This also have some other interesting implications, such as it is possible to access TCP as a normal file. You can, for instance do something similar to the Unix netcat command by issuing the MCR command: > PIP TI:=TC:"foo.com";4711 which would open a connection to foo.com, on port 4711, and any data sent from that machine will be shown on the terminal. The resources used by TCP/IP are modest. A memory area (size selectable at generation/startup) is used internally. The amount of memory in the private pool limits the amount of data that can be buffered. Normal pool is used in a small quantity for each TCP port that is open. People are welcome to play around with this, and make improvements. Contributions of code is most welcome. There are still lots of things to do. The programs marked as rudimentary should be rewritten. The most obvious thing still missing is a telnet daemon, which probably is my next step. However, the reason for now announcing the release is that it can finally be distributed natively from an RSX host. The main locations to download the TCP/IP for RSX are: Madame.Update.UU.SE (anonymous ftp). This is one of my development systems for this software. It runs under E11, and if things are down, I blame E11. :-) When connected, you are already in the right directory. There is both an RL02 disk image there, which can be downloaded by anyone. If you happen to have an RSX system which you are conneting from, you can also try getting the BQTCP.TAP tape image. Such an image will not transport cleanly to a non-RSX system, however. Sorry. ftp.Update.UU.SE (anonymous ftp) - /pub/pdp11/rsx/tcpip The disk image is normally duplicated to ftp.update.uu.se as well, so the same file can be found there. I hope some people will find this useful/amusing. :-) Johnny Billquist -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

8 years, 6 months

Still seeking 3B2 information

by lists＠loomcom.com

Hi everyone, I've made tremendous progress on my 3B2 emulator. It's being implemented under the SIMH simulator platform, which has been a huge help. My WE32100 core is getting closer to being complete. I'd consider it alpha quality right now, but it has enough instruction coverage to pass the 3B2's power-on self tests and to (barely) run some of the 3B2 firmware mode tools. Implementing the WE32100 core has been thanks to the processor manual and assembly language manuals that are available on BitSavers, but outside of the CPU, virtually all of my understanding of the 3B2's architecture has come from studying the ROMs and the SYSVR3 source code. I've also been helped by having remote access to a running 3B2 so I can assemble and disassemble code using the real AT&T tools. Beyond that, I have found precious little documentation. I'm at the point now where I'm pretty well stuck until I can find more information. I understand large chunks of the memory map now and should be able to do things like simulate the floppy and hard disk controller, but there are large gaps in my understanding. There are many undocumented registers that are used by the firmware, but don't appear in the SYSV source code anywhere. What they mean and what they're for is anybody's guess. I've just stubbed them out for now. If anybody has access to schematics, architecture docs, or other memory map information, I'd be eternally grateful if you could share it! -Seth

8 years, 7 months

TSX Plus...

by lbickley＠bickleywest.com

After stating that I expected TSX Plus to be available generally to the collector community this week, I have had a number of folks request access to TSX plus via private FTP. Please be a bit patient and wait for me to post it to a new website I'm in the process of creating. I now have full agreement from S&H to generally release TSX Plus, COBOL, etc., to the collector community via a simple download. BTW: I have converted all of the original documentation, which was in HP print file format to PDFs for easier and more general use. Over time I will likely be able to release some of the utilities, etc. that S&H used internally with TSX plus. Some time ago S&H gave me all of their RL02 packs and a SMD drive with everything they had related to the PDP-11 version of TSX. (They have a current version of TSX for X86 systems which is NOT free and is NOT part of this release). Over time, there may be a project to scan the source listings and recreate TSX Plus source code. (The source listings are available on bitsavers.org (pdf/dec/pdp11/tsxPlus/listings/). Unfortunately, we are missing the MACRO definitions in the source listings. Some of us are working on that issue. (Note: All of the original PDP-11 source code was accidentally lost by S&H). I will also make available any software that other folks submit to me related to TSX on my website. Regards. Lyle -- Bickley Consulting West Inc. http://bickleywest.com "Black holes are where God is dividing by zero"

8 years, 7 months

docs or software for Quay 900 (uses Quay 90F/MPS board)

by spacewar＠gmail.com

Does anyone happen to have documentation, schematics, or software for the Quay 900? It's a system based on the Quay 90F/MPS single-board Z80 computer and two MPI double-sided 8-inch floppy drives. The drives are MPI part no. 77618022, apparently a 9406 variant but not listed in the drive manual on Bitsavers. I suspect the pinout is close to the SA800/850 pinout (industry standard), but I was surprised to find that none of the variants in the 9406 manual have a pinout similar to that.

8 years, 8 months

EPROM image for Xylogics 472 (multibus Pertec controller)?

by earl＠baugh.org

> > On Dec 17, 2014, at 7:35 AM, Al Kossow wrote: > > > I should have one, somewhere.. Bear or Earl probably have one as well. > > Apparently I don't have an XY472, or at least one doesn't show in > inventory. I was totally ready to jump in and save the day, too! > > ok > bear. I'll try to check tonight when I get home... spreadsheet says I have 8 Xylogics SMD controllers... have to see if any is an XY472. Earl the Squirrel

8 years, 9 months

Data General Nova 3/12 and 6026 Tape Drive on craigslist

by tommie＠fox.se

Data General Nova 3/12 and 6026 Tape Drive in Tucson, AZ on Craigslist https://tucson.craigslist.org/sys/4591315871.html /Tommie My Data General stuff: http://www.datageneral.org/

8 years, 11 months

Logic Analyzers and In-Circuit Emulators

by aek＠bitsavers.org

I spent the last week trying to document some of my analyzers and ICEs. There are tons of photos, firmware dumps and some new manuals on bitsavers under appliedMicrosystems, biomation, hmi, futuredata, hp/te hp/64000 and hp/64700. The HMI-200-68000 manual that arrived today had the 68K DOS software in the binder, zipped and up now under bits/HuntsvilleMicrosystems Has anyone ever noticed a pattern to the numbering on the underside of MMI PALs? It would be nice not to have to lift the labels off them. The ones I indentified were B7304 14L4 B7320 16L8 B7321 16R4 B7830 20S10 B7840 20L8 Most are protected. Every once and a while I found one that wasn't. I'd be interested in other AMC ICE firmware dumps to add to the archive. I've made some progress identifying the buses and what the various chunks of firmware are for. Next thing to do is trace the pinouts and see if the house-marked 6809 memory mapper is a MC6829. From looking at the manual, the HMI-200 is kind of interesting in that it can run without a target. The Applied Microsystems units require a 'null target' board.

8 years, 12 months

Source for IBM logic probe tips

by h.j.stegeman＠hccnet.nl

Hi, Who can help me with a source (not IBM) for logic probe tips used with IBM MST and SLT backplanes. See: http://home.hccnet.nl/h.j.stegeman/IBM_logic_probes.jpg Prefably the lower one (P/N 453826). Thanks for your replies. Regards Henk

9 years, 1 month

San Diego, CA: 1991 ERA AS400

by mstaunton＠roadrunner.com

Sorry got really sick. Below is the model numbers. I will supply more info if anybody is interested Pricing is open due to shipping weight is included CRT monitors working with cables HP A4033A 65lbs HP A45764 75lbs servers/workstations HP Visualize C180 30lbs HP Apollo 400 MOD#A2193A 90lbs Mentor Graphics HLN5065W 100lbs I clan also be contacted via cell 7607030986

9 years, 1 month

Ceiling Apples

by terry＠webweavers.co.nz

An account of a small vintage computer rescue. Not uncommon machines but I'm glad I saved them from the scrapheap. http://www.classic-computers.org.nz/blog/2014-12-23-xmas-apple-salvage.htm

9 years, 1 month

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb January 2015