You haven't visited www.6502.org yet, have you?
Dick
-----Original Message-----
From: mark acierno <acierno(a)mindspring.com>
To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org>
Date: Sunday, March 05, 2000 12:18 PM
Subject: KIM-1 OOOPS
>I forgot to ask if anyone know of a good assembler or cross-assembler for
>the KIM-1?
>
>
>mark
>
>-------
>
>ICQ 40439199
>http://www2.msstate.edu/~mja2
>
>
Come on now, everyone on the list should know by now that I wouldn't even
<think of the possibilty of running UNIX on a PDP-11 or a VAX :^)
Unix is not my favorite but for PDP-11s, it's historical. ;)
<Note, amazingly I'm not opposed to running UNIX on a PDP-11 like I am to
<running it on VAXen. I just don't have the hardware to run the versions
<I'd be most interested in running (and don't have the room for it anyway).
V7 runs nice on E-11. Runs nice on my 11/73 too.
Allison.
There's no telling what you'll find, but why not take a look at
<www.6502.org> and see if there isn't a pointer you can use.
Dick
-----Original Message-----
From: mark acierno <acierno(a)mindspring.com>
To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org>
Date: Sunday, March 05, 2000 11:28 AM
Subject: KIM-1
>I just got a kim-1 (with KIMEX expansion board) was wondering if anyone
>still had a copy of tiny basic ( for KIM) arround in any format (text,
>tape, ect.) or knew where there was a copy on the web.
>
>I know this is a long shot!
>
>
>mark
>
>-------
>
>ICQ 40439199
>http://www2.msstate.edu/~mja2
>
>
I just got a kim-1 (with KIMEX expansion board) was wondering if anyone
still had a copy of tiny basic ( for KIM) arround in any format (text,
tape, ect.) or knew where there was a copy on the web.
I know this is a long shot!
mark
-------
ICQ 40439199
http://www2.msstate.edu/~mja2
This may be old news to most. I have never been exposed to the PDP-11
series, but I know a lot of you are big fans. I accidently came across
another RPI alum who offers his PDP emulator free for non-commercial use, so
I though Id post some info about it:
D Bit
Developer of Ersatz-11, a software PDP-11 emulator for MS-DOS PCs giving
emulation speed far faster than the PDP-11/93. The free demo version may be
used for 30-day commercial evaluation, or unlimited personal/hobby use.
Information about commercial versions is available here. Take a live RSX11M+
V4.5 system for a test drive here.
----------------------------------------------------------------------------
PDP-11 Emulation System
Try out a live RSX11M+ V4.5 demo system
Ersatz-11 emulates an entire PDP-11 system in software while running on
low-cost PC hardware. It outperforms all of the hardware PDP-11 replacements
on the market, outstripping them by a particularly wide margin in
disk-intensive applications. Hardware PDP-11 replacements that use a Q-bus,
Unibus, or ISA bus for I/O can't come close to Ersatz-11's disk performance
because they are limited to the speed of the I/O bus for all disk transfers,
regardless of actual disk (or disk cache) speed. Ersatz-11 avoids this
bottleneck since it uses the PC's main memory and takes advantage of the
tight disk-to-memory coupling in modern PCs.
Ersatz-11 is by far the least expensive PDP-11 replacement product on the
market. It quickly pays for itself in reduced maintenance, power, and
climate control costs. Since its CPU is powered by the PC's processor and
not a special-purpose processor card, there's no expensive custom hardware
to maintain, and future upgrades to the PC's processor will make its PDP-11
emulation even faster.
Orders for Ersatz-11 are usually shipped out the same day.
Ersatz-11 features (Note: not all are available in Demo version)
Processor emulation:
PDP-11/23, PDP-11/24, PDP-11/34a, PDP-11/40, PDP-11/44, PDP-11/45,
PDP-11/53, PDP-11/70, PDP-11/73, PDP-11/83, PDP-11/84, PDP-11/93, or
PDP-11/94 CPU with individually selectable CPU features
FP11/FPF11/FPJ11 floating point processor
4 MB main memory (248-400 KB in Demo and Lite versions)
KW11L line clock (50/60 Hz, settable)
Display register (using special hardware)
Disk devices:
UDA50,RQDX3/RAxx,RDxx,RXxx MSCP disks; number limited by available memory
(not present in Demo version)
RK11D/RK02,RK05 disk drives; up to 8 per controller
RL11,RLV11,RLV12/RL01-02 disk drives; up to 4 per controller
RK611/RK06-07 disk drives; up to 8 per controller
RP11C/RP02,RP03 pack drives; up to 8 per controller
RX211/RX02, RX11/RX01, or RXT11/RX01 dual 8" floppies
RH11,RH70/RM02/03/05/80/RP04/05/06 removable pack disk drives; up to 8 per
Massbus (full version only)
RH11,RH70/RS03-04 fixed-head disk drives; up to 8 per Massbus
RF11/RS11 fixed-head disk drives; up to 8 per controller
RC11/RS64 fixed-head disk drives; up to 4 per controller
Tape devices:
KLESI,TQK50,TQK70/TU81,TKxx TMSCP tapes; number limited by available memory
(not present in Demo version)
RH11,RH70/TM03/TE16,TU45,TU77 magtape drives; up to 64 per Massbus
TM11/TU10 magtape drives; up to 8 per controller
TS11,TSU05,TSV05,M7454,TQK25/TS04,TS05,TU80,TK25 magtape drives; up to 8 per
controller (most configurations use just one)
TA11/TU60 dual cassette tape drive
TC11/TU56 DECtape drives; up to 8 per controller
PC11 paper tape reader/punch
Communications devices:
DL11 terminal ports; console and up to 31 others (16 total in Demo and Lite
versions)
DHQ11,DHU11,DHV11 serial multiplexers (full version only)
DZ11,DZV11 serial multiplexers (full version only)
LP11 printer ports; up to 4
DELUA Ethernet ports; up to 4
DEQNA Ethernet ports; up to 2 (not in Demo version)
Other features:
Versatile command language for controlling and monitoring emulation
Configuration may be modified without halting or rebooting emulator
Extensive logging facilities for capturing controller commands, terminal and
line printer output, and Ethernet traffic
Automatic configuration of floating CSR/vector addresses
Automatic selection of controller types based on emulated CPU type (for
devices such as the RL11/RLV12 whose Q-bus and Unibus versions have
programming differences)
PC hardware support
Block devices:
Disk images contained in DOS files
Raw SCSI disk drives (full version only)
Raw floppy drives (directly compatible with many types of DEC media)
8" drives may be attached using the D Bit FDADAP floppy disk adapter board.
RAM disks in DPMI memory (full version only)
Tape devices:
Tape images contained in DOS files
Raw SCSI tape drives (full version only)
RAM tapes in DPMI memory (full version only)
Character devices: (see comparison of multi-serial boards)
Emulated VT100 on SVGA -- can flip between up to 12 virtual screens, VESA
and Trident 132-column modes are supported; keyboard is fully customizable
using scripts for each key, default keyscripts emulate VT100 keyboard
including keypad
COM ports (FIFOs supported if available, including 16C650A etc.)
LPT ports
Comtrol RocketPort/PCI multi-serial boards (full version only)
Chase Research PCI-FAST multi-serial boards (full version only)
Boca multi-serial boards (full version only)
Digi AccelePort Xe (and older PC/Xe) multi-serial boards (full version only)
Sound Blaster MIDI port
Network devices:
Any Ethernet interface with a packet driver
NE2000 clones, ISA or PCI (built-in driver)
Bus adapters:(note PCI vendor change)
H & L Associates model UPG3600-PIO ISA/Unibus bridge (full version only,
limited support now, full support in a future update)
The Logical Company model BCI-2103 PCI/Q22 bridge (full version only)
The Logical Company model BCI-2003 PCI/Unibus bridge (full version only)
----------------------------------------------------------------------------
For more information contact info(a)dbit.com
D Bit
11 Bank Street
Troy, NY 12180
Voice: +1 (518) 271-6824
FAX: +1 (518) 272-3853
I have no idea if this is new - no idea if the product is good, bad or
indifferent. Just thought somebody might be interested.
Bob Stek
Saver of Lost SOLs
bobstek(a)ix.netcom.com
Please contact this person direct, not me. If he's just starting to
get into classics he me join the list, else he may be interested int
rading the stuff out or selling it....
-------------------------------------------
Rich shinebarger <richme1047(a)yahoo.com>
wellsville, ny usa - Sunday, March 05, 2000 at 09:27:33
i need info on an old ibm system/34 it is operational and i have
terminals for it but they wont connect to it. also i need
to know how i can hook a DOS computer to a win95/98 network and i
have an old iomega disk drive that takes 20meg
8 1/2 inch cassettes i need drivers or info on how to set it up
Y2K compatible dir listing including the TSX+ time stamp, but doesn't
<support all those innumerable switches yet), PIP.SAV and DUP.SAV would be
<some work but not impossible at all, and also I've always meant to flesh
<my puny FORTH mini-OS into something real. Cause what I'd really like to
<see is something you can legally run on a real PDP-11 w/o any "hobbyist"
<restrictions, since you never know when you might actually make some money
<by accident with these old machines. Media conversion, consulting, whateve
<For a lot of us it's a really fine line between job and hobby!
One possibility is to not try to make DEC compatable utilites and develope
a set of basic utilities so people could develope with and on fuzzball.
Allison
Had a pretty good Saturday got the following items:
1. Mac Powerbook 170 with adapter needs a little work but was 29 dollars.
2. Sear Tele-Games Super Video Arcade game with 12 cartridges and 2 paddles.
3. 22- Atari 2600 cartridges, two were new to me. Gateway to Apshai and Haunted House.
4. A Grid 286 and 386 notebooks.
5. About 25 books and manuals for the collection.
6. New in the numeric keypad for the Apple II by The Keyboard Company.
7. Several new mouse pads for that part of the collection.
8. About 10 new cups to add to that part of my collection also.
All in all it was a good day since I also picked up several other items that are 10 years old yet but were too good to pass up.
Hi,
Disk-2-Disk is an old commercial program for the Amiga by Central Coast
Software. There is a demo of it on Aminet (misc/emu/D2D_Demo.lha).
D2D can be used to read data from C64 disks in an unmodified Amiga 5.25"
floppy drive. According to the documentation in the demo archive, reading from
tracks 1-17 is really slow because the program must do some tricks to account
for real 1541 drives having variable speed. (There is a program on Aminet,
misc/emu/1541.lha, which can read 1541 disks but this requires that the Amiga
drive's speed be reduced.)
Does anyone have an original copy of Disk-2-Disk that they would be willing
to sell? If you do, please contact me.
Regards,
-- Mark
