test-drb

test-drb@ccmp.vtda.org

101090 discussions

by hofmanwb＠worldonline.nl

In my experience great care is necessary with TK50 tapes.We bought a bunch original DEC tapes recently, but it was necessary to clean heads before reading every time. Wim ---------- > From: Bill Bradford <mrbill(a)mrbill.net> > To: classiccmp(a)classiccmp.org > Subject: source for cheap TK50s? > Date: Monday, June 12, 2000 12:25 AM > > Anybody know a source for cheap TK50 tapes? I dont mind used... > > Bill > > -- > +--------------------+-------------------+ > | Bill Bradford | Austin, Texas | > +--------------------+-------------------+ > | mrbill(a)sunhelp.org | mrbill(a)mrbill.net | > +--------------------+-------------------+

25 years, 10 months

8255 PIO

by CLASSICCMP＠trailing-edge.com

>Anybody knows, if they still are available ? >If yes, where ? Anyplace that sells older Intel chips certainly has them. Jameco, in particular, has both the "regular" and CMOS versions, and with a choice of speed grades: 52724 8255 IC,MPU,8255(D71055C NEC) 3.95 3.59 _____ 52732 8255A-5 IC,MPU,8255A-5(8255AC-2 NEC) 4.95 4.49 _____ 52417 82C55A IC,MPU,82C55A (MB89255A) 3.95 3.59 _____ 52425 82C55A-5 IC,MPU,82C55A-5 3.95 3.59 _____ -- Tim Shoppa Email: shoppa(a)trailing-edge.com Trailing Edge Technology WWW: http://www.trailing-edge.com/ 7328 Bradley Blvd Voice: 301-767-5917 Bethesda, MD, USA 20817 Fax: 301-767-5927

25 years, 10 months

8255 PIO

by dhquebbeman＠theestopinalgroup.com

I'd be shocked if you can't get them from Radio Shack. -dq p.s. I got at least one laying around but they're OOP (out of production) I think I'll have to hang onto it. > -----Original Message----- > From: emanuel stiebler [mailto:emu@ecubics.com] > Sent: Wednesday, June 14, 2000 1:49 PM > To: classiccmp(a)classiccmp.org > Subject: 8255 PIO > > > Hi, > Anybody knows, if they still are available ? > If yes, where ? > > cheers, > emanuel > >

25 years, 10 months

Looking for Ultrix 4.4

by sethm＠loomcom.com

Hey teen gang, Does anyone have an Ultrix 4.4 (RISC) distribution CD-ROM they'd like to part with, or make a copy of? I have a license but no media, and I'd prefer not to try to deal with the Compaq Empire if I can avoid it. (P.S. - Plus, technically I'm kinda grey on whether the license I have represents a "legitimate transfer of right to use" or not. But since Ultrix is officially a deader-than-dead end-of-lifed "These aren't the droids you're looking for; why don't you talk to our nice Tru64 salespeople?" type of software, I don't really care :) I just want to install the damn thing on a DECstation 5000/200) (P.P.S. - Yes, I know NetBSD is better, and supports DECstations. But I want Ultrix for reasons far beyond the understanding of mortal men.) (P.P.P.S ...Or women.) -Seth

25 years, 10 months

*Way* OT: Sale of Goods Act

by Glenatacme＠aol.com

Tony Duell wrote: > In the UK, if you buy something from a shop then it has to be 'of > merchantable quality' -- it has to do the job that a reasonable person > would expect that sort of product to do (a computer has to compute, a TV > set has to receive currently-broadcast programmes, a packet of %food has > to be edible, etc). Also, if you ask a shop owner for a product to do a > particular job ('I want a computer to run this word processor package', > 'I want a glue to stick metal') then the product he sells you has to do > that job. Yes but . . . suppose a customer comes in with a software package which has the "System Requirements" listed in the documentation. Customer takes the system, finds out software won't run, even though the stated requirements are met, and returns the system. We replace the system, and the software still won't go. Then we discover that the software is buggy, or finicky. Does the merchant still owe the customer a refund, even though there is no real fault in the hardware? This happened to me, and it wasn't any fun . . . > You can sell a defective item if you point out the defects before sale > 'This computer is an ex-demonstration model, missing box, instructions > and mouse'. In that case I can't complain later that the mouse is > missing. But if, say, the floppy drive doesn't work then I have a right > to a refund. A refund? Or replacement of the defective drive, under warranty?? Glen 0/0

25 years, 10 months

To get back On Topic

by dhquebbeman＠theestopinalgroup.com

> What ever happened to that old Modem vendor? > I know Racal Vadic is still kind of around... in other businesses. > Racal Interlan/Micom Interlan is kind of gone. > > Boy have a large number of the "biggies" bit the dust over the last 15 > years. Did Anderson-Jacobsen survive beyond the acoustic coupler days? I have an old unit that could go up to 600 baud using Bell 103a standards, although it was difficult to find anyone who would support 600 baud using Bell 103a; 600 baud was usually Bell 202? (whatever the standard was for 1200 baud). -dq

25 years, 10 months

TI Professional Computer

by Glenatacme＠aol.com

R.D. Davis wrote: > I still don't see what's wrong with thoroughly examining something > before purchasing it, whether it's used, or new. It makes perfect > sense to take a tool kit into a store where one is shopping for some > random piece of electrical or electronic equipment... might not be a > bad idea when shopping for a car either. Sellam Ismail replied: < R.D. Let's go shopping! Call me the next time you walk into a consumer electronics store or a new car lot, and please bring your toolbox and meter along. I'll bring a camera so I can snap shots of you being forcibly escorted out of the store. > Sellam is right on, here. If someone came into my store and wanted to perform a component-level test on any equipment I had for sale, first I'd assume they were joking, and laugh. If they persisted, I'd have to ask them to leave. If someone gets zapped in my store I'd be liable. Additionally, store personnel don't have the time to watch over such an operation to make sure that the "tester" doesn't damage or steal something. You might be able to get away with this at a hamfest, though. Glen 0/0

25 years, 10 months

Fwd: RT-11 capable systems in Ann Arbor, MI

by jfoust＠threedee.com

>X-Sender: jfmjfm(a)srvr5.engin.umich.edu (Unverified) >Date: Tue, 13 Jun 2000 09:14:36 -0400 >To: microscopy(a)sparc5.microscopy.com >From: "John F. Mansfield" <jfmjfm(a)engin.umich.edu> > >Subject: Surplus Equipment going cheap (not free). > >I have the following surplus equipment that is destined for the >recycle dumpster if no-one is interested. > >1. Two Tracor TN5500 XEDS systems. > a. One system has a 30Meg hard disk drive, two 5.25 Syquest >removable hard disks (both failed) and two floppy disks one 5.25" and >one 8". There are actually two 5.25" disks and two 8" disks in a >separate subsystem, but the hard ware only supports two floppies at >one time and so we have one of each set up. A standard Tracor >keyboard with keypad and monitor is supplied. The system does not >have a printer. We modified it so it would run without a printer and >if we need print out we have a couple of switch boxes that directs >the print out to a Mac (PC can be substituted). We also have the HP >plot software and this is directed to a program on the Mac that can >then send the plot to a laser printer or can save it for pasting into >word processing documents. >The system has the imaging package that will allow the computer to >control the microscope (it is setup for a JEOL 2000FX) and record >STEM and SEM images and XEDS maps. The software includes SMTF and >SQMTF. The system has an almost new refurbished light element >detector (detects down to C). System also has a license for RT-11, >the DEC operating system and it can run an FTP server for removal of >spectra and images to a remote computer. Make an offer. > > b. The second system is floppy based and also has imaging >which is setup for an SEM whose manufacturer evades my memory, but if >anyone is interested I will obviously find out for you. This system >has a Be window XEDS detector with it. Make an offer. > >2. Liquid nitrogen cold stage for JEOL 2000 FX Gatan double tilt (old >model 613 upgraded to double tilt). Sample airlock pumps dewar jacket. >Make an offer. > >3. A Perkin Elmer 5400 data acquisition computer (6809 chip running IDRIS). > >I also have a Be window XEDS detector that is non functional that >fits the high angle port of a JEOL 2000FX > >In each case the buyer pays shipping. > >-- > >Dr. John Mansfield CPhys MInstP >North Campus Electron Microbeam Analysis Laboratory >417 SRB, University of Michigan >2455 Hayward, Ann Arbor MI 48109-2143 >Phone: (734) 936-3352 FAX (734) 763-2282 >Cellular Phone: (734) 358-7555 >(Leaving a phone message at 936-3352 is preferable to 358-7555) >Email: jfmjfm(a)engin.umich.edu >URL: http://emalwww.engin.umich.edu/people/jfmjfm/jfmjfm.html >Location: Lat. 42? 16' 48" Long. 83? 43' 48"

25 years, 10 months

OT Now: Re: TI Professional Computer

by dhquebbeman＠theestopinalgroup.com

> Although I believe a later edition of the Guide that fell through a > temporal vortex described the Marketing Department of the Sirius > Cybernetics Corporation as "a bunch of mindless jerks who > _were_ the first > up against the wall when the revolution came". > > Now where did I leave my Peril Sensitive Sunglasses? Right next to your SEP field generator.... :-) -dq

25 years, 10 months

OT Now: Re: TI Professional Computer

by dhquebbeman＠theestopinalgroup.com

> *heh* I think it was the marketing department at the Cirrus > Cybernetics > company who were a bunch of mindless jerks who would be first > up against the > wall when the revolution comes. > > Killing all the lawyers comes from Shakespeare. Richard III

25 years, 10 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb