- test-drb@ccmp.vtda.org - classiccmp.org

by Van.Snyder＠jpl.nasa.gov

A correspondent claims that you have a complete set of Bendix G-15 manuals. Have you scanned them? Do you have any that Paul Pierce doesn't have (see http://www.piercefuller.com/collect/bendix/index.html)? Are you willing to lend them to have them scanned? Best regards, Van Snyder

22 years, 6 months

1
0
0 0

M7891-DC 2a fuse on +12? fixed!

by technobug＠comcast.net

On Thu, 05 Feb 2004 12:11:19 -0500 Brad Parker <brad(a)heeltoe.com> pounded out: [............] > Do old electrolytic's short out? The MS11 parts list just say "AL EL" > which I assume is aluminum electrolytic. For some reason I was > thinking > it would be a tantalum (based on it's silvery look) but now I'm > thinking > not. I think I'll replace it with a nice axial lead tantalum. If you are going to use the equipment only occasionally, a tantalum cap is an excellent choice. However, with the current reliability of electrolytic caps, the added expense is something that has to be considered. > I know sometimes badly mfg'd electrolytics will leak, but I've never > seen a dead short - but my expeience is mostly with *new* products, no > ones that are so "experienced" as this one :-) With old equipment, especially those items that have been in storage a long time, an electrolytic will depolarize. When you hit the ON button, the dielectric layer is missing and the conduction can cause a short, or occasionally, a small bang as the cap and its contents scatter around the chassis. Leakage is generally due to badly formed dielectric layers. In a pinch, you can cure a leaky cap by applying voltage of reverse polarity of about 10% of the rating for several seconds and then bringing the cap slowly up to its rated value to reform the dielectric. To safely re-energize a piece of equipment that is long in the tooth and has been sitting around for some time, you have to bring the voltage up relatively slowly to allow the electrolytic caps to re-polarize. Everyone who is collecting should own a good-sized Variac. You power the box up by bringing the voltage from naught to the operational level with the Variac over a period of about a second or so. This should allow the input caps (biggest and most expensive) to re-polarize without taking out the fuze, or worse, the rectifier. Even with switchers, this will also have a ripple effect throughout the system unless the unit has power management. I have some 50 y/o stuff around here that continues to work without repair by taking the above precautions. In your case, I would replace all the bypass caps on the board if you have had a failure in one - although good, they are probably marginal at this point in time. When replacing electrolytics, I typically go for the 105 degree items if they will fit (the current versions are substantially smaller than their predecessors), or for higher voltage beasties with the same temp rating. I also add heat protectors to caps that have been sited next to power resistors or large, silicon embers (monitors are notorious in this regard). Heat will take out an electrolytic faster than anything else. > Normally I wouldn't post this sort of thing but I figured someone else > might find it interesting/amusing. > Only if it doesn't happen to me... > -brad

22 years, 6 months

4
3
0 0

Looking for HDOS diskette layout

by dwight.elvey＠amd.com

Hi Tom Nope. HDOS is a completely different OS. As I recall, the directory is somplace in the middle of the disk. Dwight >From: "Tom Jennings" <tomj(a)wps.com> > >On Wed, 2004-02-04 at 08:21, Marvin Johnston wrote: > >> Does anyone know or have a reference regarding the >> layout of the HDOS (H8/H19) diskette and filesystem? >> The generic HDOS documentation doesn't include it. > >Isn't it just CP/M 1.4? > >

22 years, 6 months

4
5
0 0

Greedy E-bay idiots!

by SUPRDAVE＠aol.com

There is discussion on some of the ebay community boards about this. A lot of the power sellers try to justify it various ways. As for myself, I always begin my descriptions with a big line that mentions actual shipping charges only and no excessive fees. Whether or not that helps remains to be seen. I have bypassed many an auction because the shipping and bogus handling fees were not acceptable for the item sold. In a message dated 2/5/2004 5:00:20 PM Eastern Standard Time, teoz(a)neo.rr.com writes: > Did you guys see this? > <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2592518771&category=4504 > 5>. It's a thin manual for an EPROM programmer. This clown wants $9.80 for > shipping AND $2.80 for insurance (REQUIRED no less). Actual postage for > this via USPS bookrate is about 40 cents and insurance is 35 cents! How do > these clowns expect to stay in business! > > Joe

22 years, 6 months

2
1
0 0

DECnet/E and DECnet-Plus

by bqt＠update.uu.se

On Thu, 5 Feb 2004 meltie <lists(a)microvax.org> wrote: > > > FWIW, there's an implementation of the "old" network terminal protocol > > > in the DECnet/Linux kit; with some hacking you can probably port that > > > and use it to talk to DECnet/E that way. > > > > The DECnet/Linux implementation is so bad that I'd say it's unusable. > > (Atleast when I tested to/from an RSX system.) > > I've had no trouble with it using it to communicate with VAX/VMS. The > author of most of it on the other hand..! I wonder how much things you've tried... I know that the people developing DECnet/Linux have used a VMS system to communicate with to test things, but I had some problems even to that. Trying to communicate with RSX was totally useless. Basically nothing works. The only thing I managed to get to work was DAP access from the Linux system to the RSX system for transferring files from RSX to Linux. All other things with DAP fails. PHONE didn't work either. Hmm, what else is there... Ah, yes, CTERM didn't seem to work either. [...] > From: Paul Koning <pkoning(a)equallogic.com> > > Johnny> On Wed, 4 Feb 2004 Paul Koning <pkoning(a)equallogic.com> > Johnny> wrote: > >> 1. DECnet/E only supports the "old" network terminal protocol, > >> which is object 21. The other one is "CTERM" which is implemented > >> by VMS and one or two other operating systems, but not DECnet/E. > >> In fact, I think none of the PDP11s do it; it's way too complex. > > Johnny> RSX definitely implements CTERM. I think it's object 23. > > Object 23 is the old RMTERM protocol. CTERM is 42. Ah. Sorry. I looked at the known objects of my RSX system, and had to pick between 23 and 42, I picked the wrong one. :-/ 23 is handled by RMHACP and 42 by RTH. I knew both were interactive terminal protocols, but I had a hard time remembering which was which. > >> 2. DECnet/E works fine on E11. It's been a while since I've tried > >> that but I did use it, under Linux that is. I was using the "tap" > >> pseudo-ethernet to debug DECnet/Linux against DECnet/E... > >> > >> FWIW, there's an implementation of the "old" network terminal > >> protocol in the DECnet/Linux kit; with some hacking you can > >> probably port that and use it to talk to DECnet/E that way. > > Johnny> The DECnet/Linux implementation is so bad that I'd say it's > Johnny> unusable. (Atleast when I tested to/from an RSX system.) > > Unuseable for what? I didn't use it with RSX, but it works fine with > RSTS. That include rmterm... (I added that for RSTS and TOPS/20 but > not for RSX; maybe someone else has by now, if not I expect volunteers > would be welcomed...) Well, like I said before. Access from RSX to Linux don't work at all. Access from Linux to RSX works for reading files, but not writing. PHONE don't work, and CTERM didn't work if I remember correctly (I'm a bit unsure about CTERM, since it's been a few months since we disabled DECnet/Linux again). Also, PHONE with VMS systems don't work as they should either. I can't remember if I tried that much with DAP, but even if it works better there must obviously be some serious bugs in there since it fails so abmyssaly with RSX. Johnny Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt(a)update.uu.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

22 years, 6 months

1
0
0 0

More eBay madness: $2000 Otrona Attache

by r_a_feldman＠hotmail.com

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3457767314&category=177 No bids yet, so you can Buy It Now for only $3200 (cheap at half the price). Bob _________________________________________________________________ Find high-speed ‘net deals — comparison-shop your local providers here. https://broadband.msn.com

22 years, 6 months

2
1
0 0

This just in - Commodore B128 low profile computer (NOT 128D)

by Degnan＠degnanco.net

With the help of Ed Shockley and his web site insectria.net I was able to get a very trashed B128 machine up and running correctly. He's the expert with the B128 and his site can answer most questions. Direct Link: http://personalpages.bellsouth.net/d/r/drshock/b128.html Bill >Message: 28 >Date: Wed, 4 Feb 2004 23:35:13 -0800 (PST) >From: steven <tosteve(a)yahoo.com> >Subject: This just in - Commodore B128 low profile computer (NOT 128D) >To: cctalk(a)classiccmp.org >Message-ID: <20040205073513.81782.qmail(a)web40902.mail.yahoo.com> >Content-Type: text/plain; charset=us-ascii > >Don't know much about it yet, but it sure is pretty! >Seems to work fine. > >It came out the same time as the C-64, supposed to >replace the PET and be their business computer, but >didn't sell well, I guess.

22 years, 6 months

3
2
0 0

5.25 disks/programs available

by SUPRDAVE＠aol.com

they were spoken for just before you emailed me

22 years, 6 months

1
0
0 0

Web Service

by tiziano.garuti＠tin.it

Hi folks, I am the webmaster of http://1000bit.net. I am here to announce that I have decided to open my database of technical infos to the world. You can know use all the data freely in your own sites. Here you can find infos and samples: http://www.1000bit.net/ws.asp I hope that this could interesting for someone. Thanks, Tiziano

22 years, 6 months

1
0
0 0

[OT] Jim Willing

by classiccmp＠vintage-computer.com

For those that have been looking for him, Jim Willing has a new email address that he seems to be checking from time to time: jimwilling(a)vintage-computer.com >From his last message he is planning on rejoining the group sometime soon. Erik Klein www.vintage-computer.com www.vintage-computer.com/vcforum The Vintage Computer Forum

22 years, 6 months

1
0
0 0

Help wanted with an Open VMS installation

by r.lasbury＠ntlworld.com

The show device command displays the ethernet connection followed by the CDROM as.. BOOTDEV=DKA500 ADDR=A/5/0 DEVTYPE=RODISK NUMBYTES=681.88MB RM/FX=RM WP=WP DEVNAM=CD-ROM REV=1.1C and it shows the hard disk as... BOOTDEV=DKA100 ADDR=A/1/0 DEVTYPE=DISK NUMBYTES=1.00GB RM/FX=Fx WP= DEVNAM=RZ57 REV=5000 I have actually tried 5 different hard disks: 3 seagate models and 2 original DEC RZ57 drives, but they all end with the same error message while installing!!! I have proved the 3 seagate disks on a scsi card on a PC and the 2 DEC drives work OK on a DEC 5000 machine booting up a copy of Ultrix, so I am pretty sure the problem is not actually with the disk drives. _____ << ella for Spam Control >> has removed 1854 Spam messages and set aside 242 Newsletters for me You can use it too - and it's FREE! www.ellaforspam.com

22 years, 6 months

3
2
0 0

Cashtrac.exe ???

by ygehrich＠yahoo.com

Is anybody here familiar with an older DOS checkbook program called CASHTRAC. I used to run it with Windows 95 in the DOS box and am trying to get it to run under WIN XP PRO I get the following error ERROR 71 in line 200 Drive Door Open Any answers or thoughts would be appreciated.

22 years, 6 months

1
0
0 0

M7891-DC 2a fuse on +12? fixed!

by pete＠dunnington.u-net.com

On Feb 5, 12:11, Brad Parker wrote: > > To follow up on my own post, replacing the fuse created a *hot* 12v > regulator. My DVM indicated that something was shorting Vdd. > > Figuring it was a cap, I started pulling the + lines of the big caps. > On the second one the short went away. > > Turns out one of the large Sangamo 47uf caps across Vdd was a dead > short. I removed it and now the +12 is happy and the board works. > (I'll replace it in my next digikey order) > > Do old electrolytic's short out? The MS11 parts list just say "AL EL" > which I assume is aluminum electrolytic. For some reason I was thinking > it would be a tantalum (based on it's silvery look) but now I'm thinking > not. I think I'll replace it with a nice axial lead tantalum. What you described is the classic symptom of an aged electrolytic that needs reformed. In an electrolytic capacitor, the aluminium foil forms one electrode (the anode), the electrolyte (gel) is the other (cathode), and the oxide layer on the foil is the dielectric (insulator). Unless the capacitor is charged, the oxide dissolves into the electrolyte over time, and no longer insulates. The cure is to pass a small current to reform the oxide layer, and gradually build this up until the capacitor can withstand its normal working voltage without much leakage current. Cylindrical caps in a metal can are more commonly aluminium rather than tantalum; tantalum caps are more commonly made as beads of sintered tantalum. The principle is the same, though: large surface area in a small space, with a metal anode, oxide layer as dielectric, and electrolyte as cathode. -- Pete Peter Turnbull Network Manager University of York

22 years, 6 months

1
0
0 0

Restoring old floppies to usable state

by cb＠mythtech.net

>Try http://www.knightsolutions.com.au/files/apps/spinrite%205/ > >This program runs on any IBM compatible. If you have such with the correct >drive type then this program will exhaustively test and repair the surface >of any drive you care to test. I have a newer version of spinrite, and am VERY VERY VERY disappointed in it. I used it to check some hard disks that I thought were bad, it told me I was right, and I had it map out the bad sectors. The disks still failed to format. Others that is has fixed (and enabled them to format) failed shortly after with bad sectors. And of course, SpinRite only seems to do something if the drive itself is already accessible to DOS. If the drive isn't coming up (from as little as a non DOS compliant partition such as a Linux partition), then SpinRite will claim it can't read the drive at all. So basically, I've found that it doesn't seem to do much beyond that of Scandisk. VERY disappointing indeed considering GRC's reputation. -chris <http://www.mythtech.net>

22 years, 6 months

2
1
0 0

This just in - Commodore B128 low profile computer (NOT 128D)

by chrisc＠addpower.com

The computer itself is kinda nice. It had a MOS 6509 processor in it, which was the beginnings of Commodore's memory management experiments. Some models also had the same video and sound chips as the Commodore 64. I'd really like one of these myself. :) steven <tosteve(a)yahoo.com> To: cctalk(a)classiccmp.org Sent by: cc: cctech-bounces@clas Subject: This just in - Commodore B128 low profile computer (NOT siccmp.org 128D) 02/05/2004 01:35 AM Please respond to "General Discussion: On-Topic Posts Only" Don't know much about it yet, but it sure is pretty! Seems to work fine. It came out the same time as the C-64, supposed to replace the PET and be their business computer, but didn't sell well, I guess. __________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html

22 years, 6 months

2
1
0 0

RX8E printset?

by aek＠spies.com

"Diagrams for an Implementation on a TC08 Backplance" I guess TC08s are common enough in Europe that you can strip 'em to build floppy controllers.

22 years, 6 months

5
4
0 0

Help wanted with an Open VMS installation

by r.lasbury＠ntlworld.com

Yes I am trying to use the hobbyist version of 7.3-1 however I obtained that version after I failed to get 6.2 to boot with exactly the same error. I thought maybe the later version would work !!! Silly me. _____ << ella for Spam Control >> has removed 1882 Spam messages and set aside 242 Newsletters for me You can use it too - and it's FREE! www.ellaforspam.com

22 years, 6 months

2
1
0 0

Forced eBay ID Change?

by healyzh＠aracnet.com

Anyone else have their eBay ID forcefully changed recently? I've had an account for over 6 years and I predate the rules against using an email address. Looks like the b******* have decided to forcefully change all of us using email addresses for our ID's so as to better control the flow of information to us. Zane -- -- | Zane H. Healy | UNIX Systems Administrator | | healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast | | | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

22 years, 6 months

19
37
0 0

DECnet/E and DECnet-Plus

by bqt＠update.uu.se

On Wed, 4 Feb 2004 Paul Koning <pkoning(a)equallogic.com> wrote: > 1. DECnet/E only supports the "old" network terminal protocol, which > is object 21. The other one is "CTERM" which is implemented by VMS > and one or two other operating systems, but not DECnet/E. In fact, I > think none of the PDP11s do it; it's way too complex. RSX definitely implements CTERM. I think it's object 23. > 2. DECnet/E works fine on E11. It's been a while since I've tried > that but I did use it, under Linux that is. I was using > the "tap" pseudo-ethernet to debug DECnet/Linux against DECnet/E... > > FWIW, there's an implementation of the "old" network terminal protocol > in the DECnet/Linux kit; with some hacking you can probably port that > and use it to talk to DECnet/E that way. The DECnet/Linux implementation is so bad that I'd say it's unusable. (Atleast when I tested to/from an RSX system.) Johnny Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt(a)update.uu.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

22 years, 6 months

3
2
0 0

Shameless Plug Alert: More goodies for auction

by kyrrin＠bluefeathertech.com

Hi, gang, Stuff comes in, stuff goes out. I've got a stack of items up on E-pay at the moment, including an IBM PS/2 'Pumpkin' luggable, a VMEBus prototyping board, and a nine-gig SCSI drive in an external enclosure. You can do a 'Search by Seller' for 'bftbell' if you're interested. Thanks much. -=-=-=-=-=-=-=-=-=-=-=- Bruce Lane, Owner & Head Hardware Heavy, Blue Feather Technologies -- http://www.bluefeathertech.com kyrrin (at) bluefeathertech do/t c=o=m "If Salvador Dali had owned a computer, would it have been equipped with surreal ports?"

22 years, 6 months

3
3
0 0

M7891-DC 2a fuse on +12?

by brad＠heeltoe.com

I had a spare moment yesterday so I decided to try and troubleshoot my bad M7891-DC (128kw) in an 11/34a. Looks like I have no +12v. The 12v regulator seems to be working as I have 12v up the 2A fuse. But nothing after that. I'm assuming the fuse has blown. Easy to replace, but I also suspect it blew for a reason. (and replacing it might just yield another blown fuse :-) Anyone seen this before? Do they sometimes blow due to transients? I'm tempted to apply 12v after the fuse with a bench supply that has a current regulator and see what it draws. It's been a while since I worked with "plain old DRAMs" but I assume the 12v is for them (Vdd). -brad

22 years, 6 months

4
4
0 0

This just in - Commodore B128 low profile computer (NOT 128D)

by tosteve＠yahoo.com

Don't know much about it yet, but it sure is pretty! Seems to work fine. It came out the same time as the C-64, supposed to replace the PET and be their business computer, but didn't sell well, I guess. __________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html

22 years, 6 months

2
1
0 0

VAX 4300 on eBay

by jpl15＠panix.com

For those of you with intact usernames, there is the following: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3076049197&category=1479 $50 min bid; 6 days; no action as of this posting; in Florida. Cheers John

22 years, 6 months

4
4
0 0

'melted' tape roller

by witchy＠binarydinosaurs.co.uk

Hi folks, I've seen this phenomenon on the likes of printers etc but I've never seen it on a tape drive. Basically the rubber that used to surround the wheel that controls FF/REW/Play functions on the tapedeck in my newly acquired Sharp MZ80B has melted to a sticky black compound that's run down the housing and gummed up the tape wheels. Pix at http://www.wowrarelook.co.uk/DSCF5821.JPG (244k) front of housing showing icky stuff http://www.wowrarelook.co.uk/DSCF5812.JPG (27k) control wheel Note shiny surfaces where there shouldn't be shiny surfaces :) I'd assume that the tape mechanism was a standard one but the question is, can I still get the part seen in DSCF5812.JPG since it appears that's all that's at fault? Cheers as ever. -- Adrian/Witchy Binary Dinosaurs www.binarydinosaurs.co.uk - possibly the UK's biggest online computer museum www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(

22 years, 6 months

7
18
0 0

DEMPR questions

by msokolov＠ivan.Harhan.ORG

Does anyone know how to use a DEMPR? Does it internally terminate each thinwire segment or not? I.e., do you run the end of the trunk directly into the DEMPR or do you T it like every other device on the segment? Do you need to enable/ disable the thickwire uplink port (how?) or is it automatic? What does the button marked with a T in the circle do? What do the indicator lights mean? What happens if the DEMPR is powered down, do the segments simply partition with each segment remaining good by itself, or do the segments themselves become unusable? MS

22 years, 6 months

3
3
0 0

Looking for Cromemco Cyclops Video Camera documentation

by vcf＠siconic.com

Does anyone have the documentation for the Cromemco Cyclops Video camera? -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

22 years, 6 months

1
0
0 0

Restoring old floppies to usable state

by cb＠mythtech.net

> The answer is absolutely maybe. It really depends >on the original cause. Try running some test with >a known good drive. Formats appear to go ok, and basic testing (writing data to and reading from) appear to work ok. I haven't tried a real stress utility yet. > You didn't state what you were running on? Things >like Nortons disk doctor have good serface test. Right now, running on an old Mac. I'll run a few disks thru a PC to use better surface testing tools (any of my good Mac tools are either not readily available, or will only run on newer macs that have problems with 800k disks in the best of situations, so I wouldn't be able to trust the results to the disk or the mac being the source of error) Thanks -chris <http://www.mythtech.net>

22 years, 6 months

3
2
0 0

KXT11 (was: Re: looking for a few items.)

by mbg＠TheWorld.com

>> Interesting. >> >> The field guide lists the M7676 as if it was a single board >> T11, perhaps like Megan's "PDP laptop" from the VCFe. >> Anybody ever seen a M7676 / KXT11 ? >Yes, that sounds like the Falcon SBC, aka the KXT11, which >indeed is a single board computer based on the T11 chipset. The SBC, KXT11-AA and -AB are single-board to the extent that they have the CPU, boot code, memory, clock, a couple of serial lines all on-board. The only thing they don't have is a mass storage interface. I don't know what the 'laptop' I have has in it, I have been unable to successfully open it completely for examination. I think there is a hidden screw I have yet to find and remove. One of these days, however... Megan

22 years, 6 months

1
0
0 0

Forced eBay ID Change?

by RCini＠congressfinancial.com

Actually, they gave ample warning that this was going to happen. It's supposedly to prevent spammers and other nare-do-well's from culling email addresses from the member IDs. I changed mine before the deadline because I knew that I'd wind-up with an AOL-looking ID if I didn't (like "dorkus1277574") Rich -----Original Message----- From: cctalk-bounces(a)classiccmp.org [mailto:cctalk-bounces@classiccmp.org]On Behalf Of Marvin Johnston Sent: Wednesday, February 04, 2004 2:10 PM To: General Discussion: On-Topic and Off-Topic Posts Subject: Re: Forced eBay ID Change? "Zane H. Healy" wrote: > > Anyone else have their eBay ID forcefully changed recently? I've had an account for over 6 years and I predate the rules against using an email address. Looks like the b******* have decided to forcefully change all of us using email addresses for our ID's so as to better control the flow of information to us. Yes, mine was also changed *without* my permission. IMNSHO, they are attempting to divert attention from the incompetant operations people. They are idiots.

22 years, 6 months

4
3
0 0

need drivers/manual for M-Systems PC-FD card

by rigdonj＠cfl.rr.com

I found a box full of these today. They appear to be disk drive emulators using Flash memory. M-systems is still in business but they say that these reached end of life in 1999 and don't have any software or manuals for them. Does anyone remember how to program and use these? They're half length 8-bit ISA cards. Joe

22 years, 6 months

2
3
0 0

BT Merlin Tonto screen buzzing/screeching

by witchy＠binarydinosaurs.co.uk

Hi folks, I don't think this is restricted to the Merlin Tonto (Sinclair QL remade by ICL as the One-Per-Desk office companion and rebadged by British Telecom and New Zealand Telecom) since they didn't make the monitor: http://www.binarydinosaurs.co.uk/Museum/icl/opd.php http://www.binarydinosaurs.co.uk/Museum/icl/tonto.php I dug it out of storage tonight because this morning I got a load of handbooks and manuals as well as the original BT Merlin software set in nice blue wallets, and since it worked a year ago (as you can see in the pix) and has simply sat on a shelf in the house since then I just fired it up. Machine is fine and self-tests then beeps while its prompting for the date....fine....I hit the power button on the monitor and it just screeches at me before I quickly turn it off - it sounds like the wires on the yoke ringing loudly so is it possible the poor thing is objecting to being moved >from a not-so-heated room to a heated one? The storage room is warm enough in winter that it doesn't go below freezing point (and it's very dry too), but in the last couple of days here it's been in the low 50s farenheit. Anyone seen screeching monitors before? Cheers :) -- Adrian/Witchy Owner & Webmaster, Binary Dinosaurs www.binarydinosaurs.co.uk - possibly the UK's biggest online computer museum www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(

22 years, 6 months

2
1
0 0

True Data Corp Apple card

by maya2blue＠juno.com

I have come across an Apple IIe with a True Data Corporation card in it. S/N 0267 model 350405901 rev a cable out to 25pin female D 4 dip switches Sure would like to know what it is for! :) And, of course, would love to find the dip switch info. Many Tks Harve ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!

22 years, 6 months

2
1
0 0

DECnet/E and DECnet-Plus

by pkoning＠equallogic.com

X-Mailer: VM 7.17 under 21.4 (patch 14) "Reasonable Discussion" XEmacs Lucid FCC: ~/mail/archive --text follows this line-- Two points: 1. DECnet/E only supports the "old" network terminal protocol, which is object 21. The other one is "CTERM" which is implemented by VMS and one or two other operating systems, but not DECnet/E. In fact, I think none of the PDP11s do it; it's way too complex. 2. DECnet/E works fine on E11. It's been a while since I've tried that but I did use it, under Linux that is. I was using the "tap" pseudo-ethernet to debug DECnet/Linux against DECnet/E... FWIW, there's an implementation of the "old" network terminal protocol in the DECnet/Linux kit; with some hacking you can probably port that and use it to talk to DECnet/E that way. paul

22 years, 6 months

1
0
0 0

IBM PC5150 monitor wanted/question

by cb＠mythtech.net

>But if you don't and you still want to get rid of them then let me or >the list know and someone will surely take them. Don't throw them out. A few months ago, I couldn't give them away! I tried, no one would take the things. > BTW my 5150 has the monochrome monitor but it doesn't have the original >MDA card so if you don't need your's anymore I could use it. Humm... I'm nearly positive I chucked a small pile of them a month or so ago. I'll have a look and see if I have any more. -chris <http://www.mythtech.net>

22 years, 6 months

1
0
0 0

gcc cross compiler for PDP-11

by pkoning＠equallogic.com

X-Mailer: VM 7.17 under 21.4 (patch 14) "Reasonable Discussion" XEmacs Lucid FCC: ~/mail/archive --text follows this line-- >> concerning gcc/binuils & pdp-11 >> >> - gcc's (3.3.2) backend generates "unix" style asm >> - gas wants "gas" style asm and doesn't like the "unix" style asm >> - the pdp-11 gcc maintainer knows this and has some fixes which he's >> going to release soon > > GCC version 3.x generates code that, um, sucks. For most C-based > programming, there is absolutely no reason to "upgrade" beyond the > older (V2.95.3) release, which works fine with the pdp11 backend. There are plenty of day one bugs in the pdp11 backend. Some have been fixed recently, others remain. It may be that the 2.95 version did a better job of float handling than the early 3.x series, but I don't think it actually gets it right. And there were problems with -(SP) and (SP)+ modes for bytes... The calculation of instruction lengths (to select between branches and "long branches") is also wrong. I volunteered to take up the pdp11 backend maintainer slot, and I'm trying to get some of these fixes in. It would sure help if I could get explicit input. "It sucks" is not data I can use to improve what's there. If people know of problems, please submit bug reports. (Bug reports submitted by the standard gcc bug submittal process would be best.) By the way, the gcc backend generates either "dec" or "unix" output; the "dec" output isn't technically valid dec syntax but it IS valid gas syntax. paul

22 years, 6 months

1
0
0 0

Ping Tom Jennings

by jpl15＠panix.com

Sorry for the bit o' bandwidth, fellow ListMembers - Tom - if possible, check your e-mail - thanks... Cheers John

22 years, 6 months

1
0
0 0

IBM PC5150 monitor wanted/question

by cb＠mythtech.net

>You're right, the old IBM PC >stuff is getting hard to find. I started looking for it about 1 1/2 years >ago and I haven't found a single one in the surplus places. I have two IBM 5150 machines, and possibly one monocrome IBM screen to match (but I'm pretty sure the screen is broken). I've been trying to decide if I should throw them out, or attempt to ebay them (along with at least one IBM XT, and possibly an AT) -chris <http://www.mythtech.net>

22 years, 6 months

2
1
0 0

5.25 disks/programs available

by KParker＠workcover.com

Where are you located +++++++++++++++++++ Kevin Parker Web Services Manager WorkCover Corporation p: 08 8233 2548 e: webmaster(a)workcover.com w: www.workcover.com +++++++++++++++++++ -----Original Message----- From: SUPRDAVE(a)aol.com [mailto:SUPRDAVE@aol.com] Sent: Wednesday, 4 February 2004 5:52 AM To: cctalk(a)classiccmp.org Subject: 5.25 disks/programs available I scavenged some old disks from someone that was cleaning up their office after moving. Listed below is some items someone might want. Otherwise, I'll just format and keep them for extras. They all look like new and seem to be unused. system disks for Dell system200 pc. DOS/gwbasic/utilities borland turboC 1986 5disk set Microtek USD-III 1.0 5 disk set x6800 assembler something called matrix desktop. 8 disk set Turbo C++ 10 disk set procomm plus 2 disk set MS mouse and paintbrush, several copies of each MSDOS 4.01 from TRC techology research. Has the old style ms logo on them. 6 disk set MS windows 3.0 from z-nix company 5 disk set pay for shipping and they can be yours ************************************************************************ This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender cannot warrant that this e-mail or any files transmitted with it are free of viruses or any other defect. If you have received this e-mail in error, please notify the sender immediately by return e-mail and destroy the original e-mail and any copies. ************************************************************************

22 years, 6 months

1
0
0 0

Looking for HDOS diskette layout

by marvin＠rain.org

I read this on the Heath listserver, and figured someone here would be able to help him out :). Reply to him directly as I don't *think* he is on this listserver. *************** Subject: Looking for HDOS diskette layout Date: Tue, 3 Feb 2004 10:45:01 -0700 From: "Eric J. Rothfus" <eric(a)ROTHFUS.COM> Does anyone know or have a reference regarding the layout of the HDOS (H8/H19) diskette and filesystem? The generic HDOS documentation doesn't include it. I'm looking mainly for the way that HDOS organizes files on the diskette and the format of the directory track. I will be creating software that can add/remove files from an image of an HDOS floppy. This is in continuing development of the SVD (www.rothfus.com/SVD). The SVD can now boot the H8 and will soon be tested on the H19 (thanks Jack!). Thanks! Eric

22 years, 6 months

2
1
0 0

Restoring old floppies to usable state

by dwight.elvey＠amd.com

Hi Chris The answer is absolutely maybe. It really depends on the original cause. Try running some test with a known good drive. You didn't state what you were running on? Things like Nortons disk doctor have good serface test. Dwight >From: chris <cb(a)mythtech.net> > >Will a magnetic bulk eraser restore a floppy to good status? > >I have some floppies that are reporting bad sectors when formatted. I've >tried bulk erasing them, and a format afterwards reports no bad sectors. >Is this actually working, or am I just getting lucky, and those bad >sectors will return shortly. > >These are DSDD 3.5's which are getting a little harder to come by. So if >bulk erasing works, then I'll do that and salvage them. > >-chris ><http://www.mythtech.net> > >

22 years, 6 months

3
3
0 0

new finds: Panasonic High Speed Scanner KV-SS855

by rigdonj＠cfl.rr.com

Found this today. Is anyone familar with them? Joe

22 years, 6 months

1
0
0 0

Qbus card I.D & info needed.

by tponsford＠theriver.com

Hi All, Going through some stuff picked up at the auction a while ago (but never completely looked through) I found some interesting Qbus stuff. I need some help with the ID though, Googling has turned up nothing useful. 1. Qbus half-height, appears to be a memory board: CDM 7703 R Circa 1980 Cyberchron Corporation 2.Qbus half-height, appears to be a disk controller card: Data System Design Circa 1980 s/n 0777 #804120-01 rev A I also found along with two Phillips RD50 cdroms, a M7552 Qbus KRP50 controller and cab kit, but no external cables. Both the RD50's and the cabkit have db15 connectors, so I'm presuming a straight through db15 might do the trick, or are there any special cables required? (were talking DEC here, so I would't be surprised if it needed a special cable) Ant help would be appreciated. Cheers Tom

22 years, 6 months

1
0
0 0

IBM PC5150 monitor wanted/question

by msokolov＠ivan.Harhan.ORG

Fred Cisin <cisin(a)xenosoft.com> wrote: > real IBM 8 bit VGA cards are a bit scarce these days I'm looking for one and am willing to pay fair antique value. MS

22 years, 6 months

1
0
0 0

5.25 disks/programs available

by SUPRDAVE＠aol.com

I scavenged some old disks from someone that was cleaning up their office after moving. Listed below is some items someone might want. Otherwise, I'll just format and keep them for extras. They all look like new and seem to be unused. system disks for Dell system200 pc. DOS/gwbasic/utilities borland turboC 1986 5disk set Microtek USD-III 1.0 5 disk set x6800 assembler something called matrix desktop. 8 disk set Turbo C++ 10 disk set procomm plus 2 disk set MS mouse and paintbrush, several copies of each MSDOS 4.01 from TRC techology research. Has the old style ms logo on them. 6 disk set MS windows 3.0 from z-nix company 5 disk set pay for shipping and they can be yours

22 years, 6 months

3
2
0 0

HP-UX CD & tape media loan? Who had it!

by jwest＠classiccmp.org

Quite some time ago I loaned out my 5-CD HP-UX media set (plus some 4mm DAT tapes of layered products) to someone on the list to duplicate. I was making room in the collection for my D220 system yesterday and went to reinstall the OS, and can't find my media set anywhere. I know where I can borrow a copy, but I want my originals back. Can the listmember who borrowed them from me let me know if they still have them, or if they sent them back to me and I just can't find them. I'd query the list member directly but can't seem to find the emails that were exchanged in private about it. Thanks! Jay West --- [This E-mail scanned for viruses by Declude Virus]

22 years, 6 months

1
0
0 0

I have no willpower... I need drivers, too.

by kyrrin＠bluefeathertech.com

I thought for sure I'd left my computer collecting days far behind when my interest in amateur radio re-flared a few years back. Then I came across one heck of a piece of history that I could not resist. Specifically: An original Compaq 'Luggable.' Green-screen, 8-bit motherboard, two full-height 360K FDD's, the works. Found at a local thrift store, in pretty good shape (if a bit dirty) and still functional, for the stunning price of $18 with tax. <sigh> I couldn't say no. The sight of the thing sitting on the floor, gathering dust and negligent kicks from other customers, was too much. God only knows what I'm going to do with it... Although I do have a nice IBM 8-bit MFM drive controller I'm going to stick in there, along with a hard drive. BTW, the thing had a fully-loaded AST SixPack Plus board in it. If this requires any drivers to work, I would appreciate knowing about it (and knowing where to find said drivers). Thanks much. -=-=-=-=-=-=-=-=-=-=-=- Bruce Lane, Owner & Head Hardware Heavy, Blue Feather Technologies -- http://www.bluefeathertech.com kyrrin (at) bluefeathertech do/t c=o=m "If Salvador Dali had owned a computer, would it have been equipped with surreal ports?"

22 years, 6 months

8
11
0 0

Help wanted with an Open VMS installation

by r.lasbury＠ntlworld.com

Nothing happens at all when I press CTRL-T Up to the point where it hangs all seems to be going well. I boot with the flags 0,20000 so I can see what is going on and there are plenty of messages showing certain files being loaded and configured etc. All of the %EXECINIT processes appear to load OK and then it changes to the %SWAPPER messages and this all hangs with the second %SWAPPER message where it checks the status of the system disk !!! Robin _____ << ella for Spam Control >> has removed 1845 Spam messages and set aside 241 Newsletters for me You can use it too - and it's FREE! www.ellaforspam.com

22 years, 6 months

1
0
0 0

Need RT-11 on RX02

by dave＠mitton.com

Folks, I need some help. I'm trying to bring up my LSI-11 system (KDA11, BA11-VA Cabinet, RX02, VT100), and due to a basement flood a few years ago, all of my RX02 media has been water damaged. This was my last 8" floppy system. The diskettes are sticking to the jacket, and some bits of the lining are sticking to the oxide, (or vice versa) anyways I cannot get anything to boot. I've tried cleaning a few of the media with isopropyl alcohol, but no success yet. I had a complete RT-11 V4 distribution (and all the binders) but even the DEC distribution diskettes got hit. Some of them have mold on the labels. I'm looking for someone to help me with a copy of a known good bootable RX02 RT-11 system diskette, and maybe even some diagnostics. There may be something wrong with the drives, but given the unreliability of my media, I cannot tell. I still need to sit down and single step through the bootstrap and figure out what is bombing, but I could use to remove some variables. Can anyone help me? Easiest if you are in the area, I could pick up. Thanks, Dave. (In the northwest side of the Boston Area)

22 years, 6 months

7
14
0 0

Help wanted with an Open VMS installation

by r.lasbury＠ntlworld.com

Can anyone please help... I am trying to install OpenVMS 7.3-1 for the first time onto a DEC 3000 Model 600, I have checked the compatibility of the hardware and the console firmware is the latest version however the installation process hangs with the message "%SWAPPER-I-SYSDISK, checking status of system disk" Has anyone experienced this before. All help advice and suggestions gratefully received Robin _____ << ella for Spam Control >> has removed 1811 Spam messages and set aside 239 Newsletters for me You can use it too - and it's FREE! www.ellaforspam.com

22 years, 6 months

3
2
0 0

Ultrix on an 11/730?

by msokolov＠ivan.Harhan.ORG

Brad Parker <brad(a)heeltoe.com> wrote: > Excellent. I didn't realize that. I think I got confused looking at > NetBSD (which says it won't boot on a 730). Please don't confuse BSD and NetBSD. It may help to realise that "net" is Russian for "no", so NetBSD really means "not BSD". I strongly encourage you to run 4.3BSD on your VAX. A Classic Computer should run a Classic OS! > It looks like it has an RL02, an "R80" and some sort > of 9-track. It's two racks wide. We'll see :-) Standard 730 config. But the good part is that you have a tape drive, that's the most important and most often overlooked part. > I understand there were microcode issues on the 730 which made booting > painful. Yup. > I didn't realize there was a "fix" to the microcode. Yes, I'm pretty sure it was fixed, although since I have never actually had a 730 in my hacky hands I have never been able to see and verify it for myself. Ultrix V2.00 source contains the following comment (in /sys/stand/Makefile): # 9 Dec 83 --jmcg # Deleted special references to old 730 bug. There is no longer a # distinction between versions for 780, 750, and 730. Distribution # media, however, contain `boot_justask' as `boot' to avoid attempts # to boot prematurely. This comment makes me fairly assured that this bug was indeed fixed, and from the comment date apparently quite early. I have a copy of VAX-11/730 console and microcode cassette with microcode version 58, which almost certainly has this bug fixed. Unfortunately it is not a virgin copy but a mutilated one. It was copied under Vampirist Mediocre System (VMS) which did not do a true block-for-block copy like UNIX dd, but parsed the original RT-11 filesystem and copied only the files, constructing a new RT-11 filesystem on the copy, so the files are not necessarily in their original locations, the dates on the files are wrong (the date of VMS copying, not the original date), etc. Since this cassette image is mutilated, it is not on my FTP site, but I can send it to you if you need it. I am still looking for a virgin block-for-block 730 TU58 image. MS

22 years, 6 months

10
15
0 0

Ultrix on an 11/730?

by msokolov＠ivan.Harhan.ORG

Some time ago I wrote on this list: : First there was Ultrix-11 : for PDP-11 (DEC's stolen V7 UNIX). It has been brought to my attention that the above has been interpreted differently from my intended meaning. I did not mean stolen in the negative legal/moral definition of this term (as in robbing someone of something), I meant it in the much more common programmers' vernacular definition of "stolen" as in "I stole this routine from...", without any negative meaning whatsoever. I apologise for the unintentional alternate meaning and its negative implications. MS

22 years, 6 months

1
0
0 0

Ultrix on an 11/730?

by msokolov＠ivan.Harhan.ORG

Curt vendel <curt(a)atarimuseum.com> wrote: > Ultrix was written for MIPS processors wasn't it??? I guess you are too young to remember VAX Ultrix. :-) First there was Ultrix-11 for PDP-11 (DEC's stolen V7 UNIX). Then Ultrix-32 for the VAX (DEC's stolen 4.2BSD). Whenever I say Ultrix, I mean Ultrix-32 for the VAX. Ultrix-32 was then ported to MIPS. MS

22 years, 6 months

4
3
0 0

Ultrix on an 11/730?

by brad＠heeltoe.com

Can anyone tell me if there is a version of Ultrix which will boot on an 11/730? And if so, can I grab media files off the net somewhere? (I know 4.3bsd would, and I'd like to fool around with netbsd but it seems like ultrix might be a good way to bootstrap) or, is there a better place to ask? (pups? tuhs?) -brad

22 years, 6 months

5
5
0 0

scanning fiche

by will1860＠sisna.com

Greetings, Do you remember the company in India that does the scan and return on CD -- how I can get in touch with them? Thank you

22 years, 6 months

1
0
0 0

SCELBAL, Scelbi books

by cswiger＠widomaker.com

Gang - I finally found an official serialized copy of "SCELBAL A high Level Language for the 8008", plus Wadsworth "Machine Language Programming for the 8008", plus Scelbi "Galaxy Game for the 8008/8080", "First Book of Games for the 8008/8080", "Monitor for 8080" and "Editor for 8080". The bad news is they're in a library so all I can do is check them out, scan, and return, according to the lady at the counter. Still, there must be some way I can purchase books that haven't been checked out in over 20 years from an Institute of Technology library. --Chuck

22 years, 6 months

9
9
0 0

preserving CD/DVD

by jwest＠classiccmp.org

Since people here have talked about archiving vintage computer data to CD/DVD, thought these two links might be of interest: Mostly common sense, but there are some good tips as well. One page summary: http://www.itl.nist.gov/div895/carefordisc/onepage.pdf The entire document: http://www.itl.nist.gov/div895/carefordisc/CDandDVDCareandHandlingGuide.pdf Just a quick fyi for those interested. --- [This E-mail scanned for viruses by Declude Virus]

22 years, 6 months

1
0
0 0

Restoring old floppies to usable state

by cb＠mythtech.net

Will a magnetic bulk eraser restore a floppy to good status? I have some floppies that are reporting bad sectors when formatted. I've tried bulk erasing them, and a format afterwards reports no bad sectors. Is this actually working, or am I just getting lucky, and those bad sectors will return shortly. These are DSDD 3.5's which are getting a little harder to come by. So if bulk erasing works, then I'll do that and salvage them. -chris <http://www.mythtech.net>

22 years, 6 months

1
0
0 0

looking for a few items.

by pds3＠ix.netcom.com

We need the following equipment. Please let us know what you have: 30 x LA42R-KA must be DEC original and new- can pay $ 30 per box of 6. MTI MXV22-M can pay $ 200 DEC M8192-YB can pay $100 DEC M8578 can pay $100 DEC M7676 can pay $750 DEC M8186 can pay $45 DEC M7549 can pay $250 DEC M7840 can pay $75 DEC M8631 can pay $200 DEC M8049 can pay $100 CODAR CTI-102 can pay $75 DEC RQZX1 can pay $250 H780-J can pay $150 Always interested in surplus DEC gear and Business Telephones and Systems. Please let me know what you have. Thank you. Shannon Hoskins Pacific Data Systems 8062 Hwy 99E P.O. Box 444 Los Molinos, CA 96055 USA 530/384-2094 voice 530/384-2097 fax pds3(a)ix.netcom.com

22 years, 6 months

6
6
0 0

Vacuum tube logic thing

by aw288＠osfn.org

I'll give this list a shot a something meat I have had for a while - maybe I can get a nice trade. I have a big logic trainer that I would like to move on. It is pretty neat and unique for three reasons: 1) It is based on vacuum tubes. Inside are a number of 12AX7oids that do the work. I think this dates to the very late 1950s. 2) The logic is really odd. It is binary, but the logic levels are not voltage levels, but phases. Hell of a way to run a railroad, in my book. 3) Its Japanese. Yes, Japanese. Apparently part of an early minicomputer project that came out of Japan called Parametron. So what I have is a really odd duck - a Parametron LT-2E, with power supply, spares kit (with spare tubes!), and the reamins of a manual. It is a pretty big desktop unit, but I think I can ship it FedEx ground in a couple of boxes (from 10512). As of now it is untested, but tomorrow I think I might look into powering it up. There is some paint flakage and a little corrosion in the aluminum body, but nothing to scream about. So I am fishing for a trade. A good trade, as I know this thing is worth some real money. What do I like? Big is good, old is good, IBM or Univac is good, but I am open to ideas. I can trade up or down with cash, if we can not quite equal things out. Try me. I'll try to get some pictures shot tomorrow. William Donzelli aw288(a)osfn.org

22 years, 6 months

5
4
0 0

HP 64000

by tony＠encoreelectronics.com

Hi, Do you still have that box of s/w and documentation? I'm a big 64000 fan and have been looking for stuff for years... Regards, Tony

22 years, 6 months

1
0
0 0

HP 64000 hard disk structure ???

by tony＠encoreelectronics.com

Did you write this and have you had any luck? Tony P.Demus - DEMUS DATENSYSTEME hpd at demus.de Mon Dec 8 17:10:43 CST 2003 * Previous message: 10342 manuals and softwasre * Next message: HP Apollo DN5500 disk and sysboot * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] Hello ! i'm trying to decode the disc structure of a HP7912 hard disk attached to a HP 64000 uC System. build in 1985! yeaaah I managed to copy the HP7912 sectors on a MO-disc SCSI on series hp 9000 / 300. i read in the MO disc image on a PC. now i have a 54MB image file. has anybody some infos about structure and tables of the directory of the HP64000 disc format ?? it's not HFS (HPUX) and NOT LIF.... i decoded the directory entries for name and date and size of file. now there are two 16bit words describing first and last page used for storing data. i have no idea how this 16bit value is belonging to a sector number. any hints ?? thanks peter -- DEMUS DATENSYSTEME GmbH . Steinbergstr. 24 D-30559 Hannover . Germany Tel +49-511-95448-0 . Fax +49-511-95448-44 http://www.demus.de . mailto:info at demus.de

22 years, 6 months

1
0
0 0

HP Jet Direct

by rfeldman＠kfa-inc.com

I'm just getting caught up with a backlog of email, so this post might be a bit late. Anyway, I have an HP Jet Direct EX (J2382B), complete with cables, power supply, manuals, and disks, free for postage (about 5 pounds, from Chicago). I also have an HP internal Jet Direct card (J2341A) for a LaserJet 4, with manuals and disks, also free for postage (3-4 pounds). Since I get the list in digest form, reply directly to me at r<underscore>a<underscore>Feldman<at>hotmail.com if you are interested. Bob

22 years, 6 months

1
0
0 0

Vhmrrxutkvbziepg

by cb＠mythtech.net

The message contains Unicode characters and has been sent as a binary attachment.

22 years, 6 months

18
38
0 0

NEC APC III, anyone have one?

by r_beaudry＠hotmail.com

Hello all, I just received a large lot of NEC APC III software and docs... Naturally, this means I need an NEC APC III to go with it :-). I know it's a not-quite-PC-compatible. Anyone have one they'd be willing to part with? I assume I'd need the keyboard and system unit. Is the video output some sort of standard, or would I need the monitor as well? Any help or hardware is appreciated.... For the list, I'm willing to make copies of manuals or software. Disks I can mail no problem, manuals will require you to pay my copying costs (all manuals are a significant number of pages). Also, I'd need ZIP codes or country to estimate shipping. One last note ... This is not super high priority for me (in fact, I haven't gotten back to everyone from my last round of stuff :-( ), so don't expect lightning speed out of me on copies. If you can wait, I'd much rather scan these (600dpi), and mail a CD-ROM. The software is as follows: - APC III System Checking Diskette v5.0 - MS-DOS System Diskette v2.11 Revision 1 - MS-DOS System Diskette v2.11 Revision 3 - MS-DOS System Diskette v2.11 Revision 4 - Digital Research Logo ((c) 1984, "REV 00") - MS GW-BASIC 2.01 - MS GW-BASIC Demonstration Diskette Version 1.0 - SLE* GW-BASIC and Utility - SLE MS-DOS System Diskette - Digital Research DR Draw (1983) - Digital research DR Draw Fonts (1983) - MS MASM 1.25 - MS-DOS BIOS Listing (5 disks, 1985) - GSX System Diskette (1984) rev 01 - GSX Drivers Diskette (1984) rev 00 - GSX System Diskette (1984) rev 03 - GSX Drivers Diskette (1984) rev 01 * - SLE=Software Library Expander -- Allowed NEC APC III to run "more programs". Part hardware, part software. Maybe some sort of PC-emulator?? Manuals are (I have multiple copies of most of these): - MS-DOS User's Guide - GW-BASIC User's Guide - MS-DOS Guide for the SLE - GW-BASIC Guide for the SLE - MASM Manual, Vol. 1 and Vol. 2 - DR Logo User's Reference Guide - Beginner's Guide to DR Logo - MS-DOS Programmer's Reference Manual (Includes supplement for APC III) - DR Draw User's Guide - GSX-86 User's Guide Thanks, Rich B.

22 years, 6 months

3
2
0 0

SCELBAL, Scelbi books

by jack.rubin＠ameritech.net

Chuck - hold the phone - I've got the following SCELBI books in easily scannable form: - 8008 Editor Program - 8008 Assembler - Machine Language Programming for the 8008 - SCELBAL - SCELBI 8H User's Manual - 8080 Editor Program I also have the 6 issues of the SCELBAL update already in .pdf form. All this stuff is slowly finding it's way to Jim Kearney's new, improved, enlarged and expanded super-brite 8008 archive, along with some more info on Nat Wadsworth and the SCELBI computer. If there is a particular title you need access to, let me know and I can move it up in the queue; otherwise it will be a few months before this all gets to Jim If you want to scan "Galaxy Game for the 8008/8080", "First Book of Games for the 8008/8080", and "Monitor for 8080" that would be great! I hope that a heart-to-heart with the head librarian would get you the books - never heard of a library that didn't cull non-used material to make room for hot new stuff on the x86! Jack

22 years, 6 months

2
1
0 0

1631D question

by thehsm＠hotmail.com

Hello Bdale, I have a 1631D connected to a 9153C hard drive. When I try to format the harddrive, the 1631D timesout before the format is completed. I was wondering if you a copy of the service manual because I want to increase the timeout value in the ROMS so I can format the HD. What CPU is the 1631 running on? Another option is to use the HAL pin on the cpu while the hard drive is format and release it before it is done. Thanks for your help. Bye, Herman

22 years, 6 months

1
0
0 0

This isn't even close to sane

by ekklein＠pacbell.net

Maybe it's just me, but eBay has been getting more and more crazy. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3583338499> &item=3583338499 Erik Klein www.vintage-computer.com <http://www.vintage-computer.com/> www.vintage-computer.com/vcforum The Vintage Computer Forum

22 years, 6 months

6
5
0 0

Looking for: Apple TURNOVER card, manuals, software....

by silviorf＠yahoo.com

Hi folks.... I looking for the software for the IBM ISA card: Apple Turnover. I know these card can read/write apple disks with an IMB-PC. I got the board, but don't have neither tha cable or the software.... Could anyone help please ??? Many thanks, Silvio Finotti ______________________________________________________________________ Yahoo! GeoCities: 15MB de espa?o gr?tis para criar seu web site! http://br.geocities.yahoo.com/

22 years, 6 months

1
0
0 0

FA: RCA 1802 Cosmac manuals and DEC cards/parts

by rigdonj＠cfl.rr.com

Cleaning out some of the duplicates and other unused stuff. <http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=rigdonj& include=0&since=-1&sort=3&rows=50> Joe

22 years, 6 months

11
17
0 0

HP JetDirect card

by jpl15＠panix.com

There was recently a thread about the JetDirect I/O cards for AitchPee stuff... I have dug one up whilst sorting thru multiple boxes of KAK looking for a small RF connector... anyway this is: JetDirect 600N Ethernet J3111A physical condition looks fine, otherwise unknown, free for the asking, ship via USPS priority mail. Cheers John

22 years, 6 months

3
4
0 0

Some things for sale . . .

by MTPro＠aol.com

Hi everyone, I have a few things I'd like to clear out if anyone interested would write me. Or later they will go on eBay and/or vintage.org MarketPlace. I have: a number of great old BYTEs, Creative Computing, Kilobaud, Sinclair, CoCo, Microcomputing, magazines, etc. A very nice Amiga 1000 with keyboard, mouse, two Amiga monitors, external floppy, disks, etc. Osborne 1 blue model, turns on and ready, but floppies need adjustment (have to check). Epson QX10 with monitor, keyboard, box, software, manuals, etc. Amstrad PPC640 (or 512, gotta check), works, but needs contrast adjusted. A few more things to come - portable terminal/printer (very nice), S-100 computer, big 'ol huge dual 8" disk drives, Lear Siegler ADM Terminal (classic iMac-like shape), ZX-80 in custom keyboard. Thanks, David Greelish, classiccomputing.com

22 years, 6 months

2
1
0 0

New vintage video gaming auction site

by vcf＠siconic.com

In light of the recent discussion about getting ripped off at eBay with video game auctions, I thought I'd pass along this press release I just got about a new videogame marketplace called Bidiots! http://www.bidiots.com/pressreleases.asp The site looks very promising, with some neat stuff (mostly neo-retro) already having been listed. Check it out: http://www.bidiots.com -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

22 years, 6 months

1
0
0 0

Wow, the "killer POKE" works! (Commodore PET 2001-8)

by tosteve＠yahoo.com

My first attempt at the so-called killer poke on my Commodore PET 2001-8 resulted in a 30% speed increase! I used "POKE 59458,62" No smoke, either! Steve. __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! http://webhosting.yahoo.com/ps/sb/

22 years, 6 months

9
14
0 0

Commodore 128 with software and RUN magazines

by vcf＠siconic.com

I don't know what the deal is here but it looks like an exchange of money might be required. See below. The Intel Xeon Master awaits your inquiry. Reply-to: Intelxeonmaster(a)hotmail.com -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ] ---------- Forwarded message ---------- Date: Sun, 1 Feb 2004 20:49:23 -0800 From: TiA <Mrscda820(a)hotmail.com> To: vcf(a)vintage.org Subject: Iv got an old commador and all the software and acessories... I'v got an old Commadore 128D system, keyboard, and screen with alot of cool software, a few accessories, and tons of RUN, and Commadore magazines. PLEASE!!! If you are intrested in this stuff, please give me an email back at Intelxeonmaster(a)hotmail.com or call me 8:00 AM - 8:00 PM at (516) 864-9203... Thanx, David Whitcomb.

22 years, 6 months

1
0
0 0

Big eBay bux for Comdyna hybrid

by jpl15＠panix.com

$1,400 bux, to be exact - which was the 'Buy-It-Now' price, that option was exercised. Ahem. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2782674461&category=4193… Cheers John

22 years, 6 months

4
3
0 0

Enlight case

by teoz＠neo.rr.com

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3455777210&category=3669… I didn't think people still buy AT cases, but this one (without power supply) went for $46.52 (I have this exact case in a p2-400 system for old games). Just pointing this out because even some common 486-Pentium PC era stuff has some value if it was of good quality. As time goes on cases get cheaper in quality, at least from what I have seen.

22 years, 6 months

4
7
0 0

Legal question on swapping gone bad

by teoz＠neo.rr.com

I know a few people that got burned sending equipment to somebody and never receiving their money or swap items in return (not from this list). Anyway what can you do legally about something like this? The people are from different states and a few that got burnt were minors. Just trying to help them out since I believe over $1k was ripped off. I am sure you guys ran into this kind of thing before.

22 years, 6 months

2
1
0 0

JetDirect card spoken for

by jpl15＠panix.com

If your initials aren't 'MM' then I regret I had only one... ;} (Damn - shoulda put 'er on eBay...) [joke...] Thanks to all the other respondents... If I find more (unlikely) I'll go down the list, in the time-order recieved - you guys were about 5 minutes apart. Cheerz John

22 years, 6 months

1
0
0 0

Estimated Price Of A "Classic" PDP-8?

by ohh＠drizzle.com

I'm baaaaack!... Apologies if this has been posted here already... I found this little horror story on alt.sys.pdp8, and it made me cringe. If anyone has a good estimate for this guy, it's probably best to reply to that newsgroup. I'm just going to go put those tank-traps and reinforced concrete into the front yard now... :/ -O.- -- forwarded message -- From: David M. Razler <REMOVECAPSdmrazler(a)rREMOVEazler.net> Newsgroups: alt.sys.pdp8 Subject: CRISIS - need estimates on recent Straight-8 sales/parts/repairs for insurance claim You're not going to believe this one Message-ID: <iq8t005iqpiudnu93ih6m3vifg3prf3b7f(a)4ax.com> Date: Wed, 21 Jan 2004 16:12:47 GMT Fortunately no one was hurt. But my friends Jeff and Candice Nisler were home from their honeymoon for about a week when their home was struck by a flying car - which took out every floor joist and sent cinder blocks crashing through his Straight-8 destroying a glass front panel, powdering the covers and modules, shooting the power supply into a steel post (which it wrapped itself around (pix at nisler.org/crash)) [The PDP-8 - or what's left of it - is in the photos on http://nisler.org/crash/down/ .] Jeff doesn't want to give up on Kermit - his first computer, but wants to force the auto owner's insurance company to repair/ restore the box. He is also looking to establish value based on recent purchases of Straight-8s, especially tabletop machines with glass panel and mod covers. Please post to me, he's a bit busy at the moment restoring the rest of his life. <I am also looking for anyone who is qualified to give me an assessment on a Raytheon CRT of the type used in the PDP-1 - it is being donated to THCM to help in the PDP-1 rehab project, and I'd like to take the full legal deduction.> -- end of forwarded message --

22 years, 6 months

16
44
0 0

Ultrix on an 11/730?

by classiccmp＠crash.com

Brad Parker wrote: . > Has anyone tried either of the tu58 "emulators"? I found one > software tar and another hardware device. Here are the two items Brad referred to: Spare Time Gizmo's solid-state TU58 replacement: http://www.sparetimegizmos.com/Hardware/TU58_Emulator.htm A copy of Dan Dan Tso's software emulator, originally written to run under 4.2BSD: http://www.tuhs.org/Archive/PDP-11/Emulators/TU58/ I haven't tried either one yet -- I still need to figure out how to get mass storage for my 11/730... FYI, --Steve.

22 years, 6 months

2
1
0 0

new find: Sun Ultra 10 - NVRAM and Boot

by dave＠mitton.com

well this thread has wandered and fragmented before I saw it. I have a Sun Ultra 5 running in my basement. It took me a little bit of work to keep it running. One problem with these platforms is that they have a battery powered NVRAM chip in them, that will give out after a several years. (Sort of like a PC's CMOS) If they die, the boot fails. Good news is that the replacement parts are available. Here's a FAQ http://www.squirrel.com/squirrel/sun-nvram-hostid.faq.html I got one from Digikey for about $20. A tip: I found if I left the system powered up for several days, that the NVRAM would charge up enough to boot ... sometimes. wrt: boot process - Scrounge around on the Sun website in the docs area, you need to find the detailed documentation on the boot process and commands. - There is a extended diagnostic mode that you can evoke with the right key combinations at power-up. - It will display running POST diagnostics while booting to the screen or a serial terminal. You can also get it to leave a failure code in the various lights on the keyboard. (get that keyboard hooked up!) You need the docs to decode the indication. Solaris 9 and Companion software CDs are availible from Sun for FREE on their website. There are also sunfreeware sites out there. Dave. On 1/31/2004 10:51 AM -0600, cctech-request(a)classiccmp.org wrote: >Date: Fri, 30 Jan 2004 20:20:07 -0500 >From: "Joe R." <rigdonj(a)cfl.rr.com> >Subject: Re: new find: Sun Ultra 10 >To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk(a)classiccmp.org> >Message-ID: <3.0.6.32.20040130202007.00849530(a)pop-server.cfl.rr.com> >Content-Type: text/plain; charset="us-ascii" > >At 06:14 PM 1/30/04 -0500, you wrote: > >> Subject: new find: Sun Ultra 10 > > > >> Found one of these today. Tried to boot it but it goes into terminal > >> mode because I don't have a keyboard attached. > > > >And won't boot as well? Odd. > > It probably is trying to boot but I don't have a keyboard attached so it >reports that there's no keyboard attached and that it will connect to a >terminal on COM 1. Then the screen blanks out. > > > > >> No idea of the amount of memory or CPU speed since I can't get to the > >> OS. > > > >Older Suns report their RAM config and at least some info about their > >CPU in the ROM-generated banner. If it has the "ok " prompt the older > >machines use, typing "banner" at it might do something useful. > > It never gets that far without the keyboard. I have a keyboard in >storage. I'll go get it tomorrow. > > Joe

22 years, 6 months

1
0
0 0

Silent 700

by kb3hag＠comcast.net

I read in some mailing list posts that you have a few silent 700's. How many 765's do you have? do you have any schems/docs for it ? i have a 765 here that is somewhat broken, nothing out the coupler and non of the keys respond, the lights all light up in the right corner. Anything you can do to help would be nice

22 years, 6 months

1
0
0 0

OT: ebay search question, excluding sellers

by healyzh＠aracnet.com

Is there a way to perform an eBay search that excludes specific sellers? My wife and I collect Neo Geo MVS carts and are getting really tired of seeing all the auctions belonging to a seller that is a bootleg selling crook. Zane -- -- | Zane H. Healy | UNIX Systems Administrator | | healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast | | | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

22 years, 6 months

6
7
0 0

how do I connect a BBC micro to a VGA monitor?

by vp＠mcs.drexel.edu

I would like to connect the RGB TTL output of a BBC micro to a VGA monitor, does anybody have any pointers - suggestions? Thanks **vp

22 years, 6 months

4
6
0 0

BRUCE LANE / BLUEFEATHERS TECH - please contact me

by jack.rubin＠ameritech.net

Bruce, I've attempted to email you at your public address and your backup (.qsl) address with no success - apparently you have an anti-yahoo filter in place. Please email me directly. Thanks. Jack Rubin jack.rubin(a)ameritech.net

22 years, 6 months

1
0
0 0

Vhmrrxutkvbziepg (MyDoom/Novarg)

by pete＠dunnington.u-net.com

On Jan 31, 18:36, chris wrote: > >The message contains Unicode characters and has been sent as a binary > >attachment. > > Despite allegedly coming from me, I was not the sender of the above > email. I assure you none of my Macs are infected with this Windows worm. > :-) > > Someone else with my addy on their machine has been infected. IP in the > header traces back to RIPE Networks in Amsterdam. > > Fortunately, it appears the list strips attachments, so the email is > nothing more harmful then a minor annoyance to the list. Yes, this is standard MyDoom/Novarg. It spoofs the sender in the "From:" and for good measure uses their hostname in the SMTP exchange when it contacts the destination. Then it adds a zipfile which contains the payload. The list does strip attachments -- you can't send attachments to this list, nor HTML. Incidentally, Sellam: just not using OE isn't a cure. It might reduce the problem, but enough people will save and then open attachments anyway; besides, there are other ways of passing a virus or worm. I've seen a few of these at work last week. I blackholed about ten machines. -- Pete Peter Turnbull Network Manager University of York

22 years, 6 months

2
1
0 0

how do I connect a BBC micro to a VGA monitor?

by pete＠dunnington.u-net.com

On Feb 1, 12:01, Dan Williams wrote: > >Probably the easiest solution if you're not a video expert is to use a PC > >with a TV input card. You could at least feed the Beeb's composite output > >into such a card (do any such cards exist with RGB inputs?) > wasn't there a hack on the mainboard to convert the composite to colour It's not a hack, it's a jumper on S39 on later Beebs (or add a small capacitor on early ones, which I admit is a hack, even if "official"). You don't need that for the UHF output, though, only for the composite video on the BNC socket. -- Pete Peter Turnbull Network Manager University of York

22 years, 6 months

1
0
0 0

quicktime of the old 20 year old mac 1984 orwellian ad.... this is cool! there is also some good mac

by esharpe＠cox.net

view the QuickTime of the old 20 year old Mac 1984 Orwellian ad.... this is cool! there is also some good Mac interviews also on this npr web site http://www.npr.org/display_pages/features/feature_1627800.html Thanks Ed Sharpe archivist for SMECC Please check our web site at http://www.smecc.org to see other engineering fields, communications and computation stuff we buy, and by all means when in Arizona drop in and see us. address: coury house / smecc 5802 w palmaire ave glendale az 85301

22 years, 6 months

1
0
0 0

New Finds: DEC OSF/1 {MIPS,Alpha}

by waltje＠pdp11.nl

All, Kudos to the folks at DEC, er, Compaq, err, HP, we have saved several quite-old versions of the OSF/1 system.. I have OSF/1 V2.0, 2.0B, 2.1, 3.0, 3.0B and 3.2 all saved, and more to come. Yay! Fred -- Fred N. van Kempen, DEC (Digital Equipment Corporation) Collector/Archivist Visit the VAXlab Project at http://VAXlab.pdp11.nl/ Visit the Archives at http://www.pdp11.nl/ Email: waltje(a)pdp11.nl BUSSUM, THE NETHERLANDS / Mountain View, CA, USA

22 years, 6 months

2
1
0 0

Some things for sale - update

by MTPro＠aol.com

Hello, with everyone's patience, I would just like to offer that I now have a list of mags for sell, please e-mail for list. Also, here is more detailed info in order to sell the following: Generic, non-front-panel S-100 system with cool smoked plexiglass cover/case Dual 8" disk drives in chassis ADM5 terminal Please see: http://members.aol.com/mtpro/s100.html Also: Amiga 1000, monitor, external disk drive - complete system IBM Convertible with printer in IBM carrying case, disks, manual, works but screen does not display properly now Osborne 1, slightly newer OCC1 model with blue face front and keyboard top, looks great, excellent display, but can't get it to boot, all "boot errors." Drive needs cleaning, adjustment, replacement? Or are my boot disks just bad? Amstrad PPC640, seems to work, ready to boot, no disk, plus contrast does not work and hinge needs repair on display Most excellent Apple /// complete system with booting Apple Profile hard drive! I am motivated to sell, will definitely sell for less than eBay prices, but I'm not giving things away for next to nothing. Please offer reasonable offers. Thank you, David Greelish

22 years, 6 months

2
1
0 0

Bad Newz

by waltje＠pdp11.nl

All, Hmm. This new year seems to have ha a bad start for me... the disks on the pdp11.nl server are fried. I have *no* idea what caused this, other than heat (in an airco-controlled room???), but it is a fact. I have ordered new disks (under warranty, fortunately) and *do* have a backup on DLT, so most of the stuff is still "around". It will take me about a week or so for things to get back up... Cheerz, Fred (back in Holland, just so y'all know) -- Fred N. van Kempen, DEC (Digital Equipment Corporation) Collector/Archivist Visit the VAXlab Project at http://VAXlab.pdp11.nl/ Visit the Archives at http://www.pdp11.nl/ Email: waltje(a)pdp11.nl BUSSUM, THE NETHERLANDS / Mountain View, CA, USA

22 years, 6 months

2
1
0 0

DECnet/E and DECnet-Plus

by healyzh＠aracnet.com

I've *finally* gotten the network problems I've been fighting at home resolved. It looks as if my Intel 10/100 24-port Switch has decided that it no longer wants anything to do with 10Mbit <sigh>. Anyhow, I've moved my home network back to my old 8-port 10/100 hub and a 8-port 10Mbit hub, and everything is happy (thankfully the 24-port is serious overkill at the moment). As a result I now have managed to get the VT420 on the DECserver 90L+ to reliably talk to my DEC PWS 433au, and my Ethertalk-to-Localtalk converter is working again so my VMS server and Mac can once again print. Life is good. Now that things are straightened back out, it's time to get back to something fun, namely getting my RSTS/E system talking on my network :^) During the network issues I managed to get DECnet/E installed on my PDP-11/73, and had managed to do a directory listing (unreliably though) of the RSTS/E system. I'm now able to reliably list directories on the RSTS/E system. More importantly I have LAT working, so I can log in from my DECserver!!!! What isn't working is the following: Getting a directory of the VMS system from RSTS/E Copying files between the two systems Logging in from one system to the other Has anyone tried getting a system running DECnet/E (Phase IV) to talk to a system running DECnet-Plus? Zane -- -- | Zane H. Healy | UNIX Systems Administrator | | healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast | | | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

22 years, 6 months

7
14
0 0

DEC's Organic Illumination Systems research

by rdd＠rddavis.org

For info. about some of DEC's more unusual research: After accidentally happening upon an interesting humorous web site, http://www.petting-zoo.net/~deadbeef/archive/, I discovered the following written by Mike Olson <mao(a)illustra.com>, back around 1989. Interestingly, the following URL is still reachable (it does get redirected, however). You will recall the DEC WRL technical memo of several months ago called "Characterization of Organic Illumination Systems." That work is described at: http://www.research.digital.com/wrl/techreports/html/TN-13/ due to budgetary constraints, the DEC WRL research team was constrained to running just a few experiments on just a few foods. Fortunately, DEC's semiconductor engineering group has carried out further experiments, and has discovered that at 140V RMS, kim-chi acts as a rectifier. [...] Sorry about posting this two months early. ;-) RDD -- Copyright (C) 2003 R. D. Davis The difference between humans & other animals: All Rights Reserved an unnatural belief that we're above Nature & rdd(a)rddavis.org 410-744-4900 her other creatures, using dogma to justify such http://www.rddavis.org beliefs and to justify much human cruelty.

22 years, 6 months

1
0
0 0

Sun MBus & SBus stuff

by classiccmp＠crash.com

> What is an SM91? I've not heard of that one! According to the Rough Guide to MBus Modules it's only a 90MHz SuperSparc II. I haven't played with 'em in so long I don't recall if they're really 95MHz or not. Re: heat and the SS20 -- yeah, I started pulling DIMMs out of it on a hunch. ;^) Still wedged, and I wandered off to some other project. > Putting together a SS1000 ... aren't that big Oh yes they are. I mean not compared to a 19" rack, but this thing is huge for a non-rolling box and has to be over 80 pounds. I didn't realize what a pain it was going to be, and am wondering where to put it... The middle of the living room really isn't the best spot. I'm also looking forward to this huge machine running off of a tiny little lunch box (Sun 411) for storage... --Steve.

22 years, 6 months

1
0
0 0

new find: Sun Ultra 10

by rigdonj＠cfl.rr.com

Mike, ONE of today's finds :-) Also got three SUN SparcStations 20s and a SparcServer 20 with some extra cards in them. Also lots of odds and ends. Joe At 05:17 PM 1/30/04 -0800, you wrote: >> > Found one of these today. Tried to boot it but it goes into terminal >> > mode because I don't have a keyboard attached. >> >> And won't boot as well? Odd. > >I suspect he's stuck at the OpenBoot prompt with no way of telling it to >boot. > >> > No idea of the amount of memory or CPU speed since I can't get to the >> > OS. >> >> Older Suns report their RAM config and at least some info about their >> CPU in the ROM-generated banner. If it has the "ok " prompt the older >> machines use, typing "banner" at it might do something useful. > >An Ultra 10 will take a max of 1Gb. The CPU speeds range from 300Mhz - >440Mhz, IIRC. It should display this info on the screen when you power it >on. > >It's a nice machine, but unless you can replace the IDE disk with a SCSI >controller and disk, the disk is a real bottleneck. My 300Mhz U10 came with >an ATA33 disk that didn't even run at 5400RPM! I still need to get it >switched to SCSI :^( > > Zane > I just got home and opened it up. Things are looking good! It has four sticks of Kingston KTS7030/512 memory. I looked them up online. Each pair is 512Mb so that means it has 1Gb of RAM! The hard drive is a Seagate Barracuda II model ST320420A. That's an Ultra ATA/66 8.5 mS 7200RPM 20.4Gb drive. It's not SCSI but it will do! The CPU is PN 501-5040. That's a 300 Mhz UltraSpark IIi CPU with a ceramic CPU and 512k cache. It's not the fastest thing out there but again, it will do! Now where can I find Windeos for this thing? :-) Seriously, I found an Adaptec AHA-2940W/2940UW PCI SCSI controller today. Will it work in the SUN? Joe Joe

22 years, 6 months

10
17
0 0

Sun MBus & SBus stuff (was Re: new find: Sun Ultra 10)

by classiccmp＠crash.com

> Of course what I drool over are the dual 50Mhz M-Bus modules I've got an SS10 running an SM52 (501-2780 IIRC) that's been doing yeoman service for the past eight years at least, 24x7 by 365. (It lost *both* disks just two months ago, so I feel relatively safe tepting fate like this ;^) I've got another SM52, but this 501-2444 doesn't play nice with the other SM52 and may in fact not work properly at all. Never got back to checking it out... I'm still tickled at having a pair of SM91's - I'd never seen any 'til these showed up on eBay. Got a late PROM for my SS20 and brought 'em up, but it kept crashing when I wasn't paying attention, so they're waiting for more round tuit's to accumulate. > I'm always interested in SBus stuff, even if only to > turn green at cards others have :) Don't know if turning funny colors is called for, but my favorites are the SWIFT combo cards - hme 100baseT and a "fast" wide SCSI interface. Oddest one I've got is a Parsytec BBK-S4 Adapter - lets an SBus system talk to Transputers. Of which I have none, but I guess it's good to Be Prepared... Has a T222 'puter on it, but there's no software in sight. I suddenly doubled the number of SBus cards I own when I was picking up SS1000 system boards. I've got hold of 8 SM81's to load up an SS1000, and three of the later "E" system boards, and am hoping that it'll all work with a non-"E" enclosure/backplane. That thing's heavy, I don't relish having to swap it to make that happen... If anyone's sitting on a CompuPro NS16032 board & docs and wants a bunch of SBus or Qbus stuff, let me know. --Steve.

22 years, 6 months

3
2
0 0

FA: Zenith Z-120 posted in marketplace.vintage.org

by vax3900＠yahoo.com

for S49.99 or trade for a SUN 386i. Thank you. __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! http://webhosting.yahoo.com/ps/sb/

22 years, 6 months

1
0
0 0

New (sic) 8" floppy media?

by tomj＠wps.com

So, what's the story with current-use 8" flop media? My brother Gregg got my old CP/M system running, novelty is wearing off and is willing to part with it now :-) It's a homemade box, I forget what's in it, though I do remember it's got a Cromemco 4FDC with a data separator piggyback board from a Trash 1 living under the WD17xx chip (the Pertecs the 4FDC was meant for had data sep on-board). Two Shugart drives with solidstte relays to shut 'em off after inactivity, which is just as well, as the bearings now howl like crazed tiny animals. I have one sealed box of Dysans (list price: $65. My price: $2 from a stationary store in Tucson AZ closing in 1998. Wish I had bought 'em all.). How does this stuff hold up? I assume no one actually makes them anymore!

22 years, 6 months

5
4
0 0

Vhmrrxutkvbziepg

by cb＠mythtech.net

>The message contains Unicode characters and has been sent as a binary >attachment. Despite allegedly coming from me, I was not the sender of the above email. I assure you none of my Macs are infected with this Windows worm. :-) Someone else with my addy on their machine has been infected. IP in the header traces back to RIPE Networks in Amsterdam. Fortunately, it appears the list strips attachments, so the email is nothing more harmful then a minor annoyance to the list. -chris <http://www.mythtech.net>

22 years, 6 months

1
0
0 0

Plus Development 20 & 40 HardCards

by rigdonj＠cfl.rr.com

At 02:28 PM 1/31/04 -0800, Don wrote: > > >On Thu, 29 Jan 2004, Carey UNRUH wrote: > >> I've just acquired some Plus Development hardcards for my 286 powered Tandy 1000 TL/2. I'm looking for the driver loaded in Config.sys called plusdrv.sys needed to run the cards. >> >> Does anyone have a copy of plusdrv.sys? Can anyone point me in the correct direction? >> >> I've done the google thing and looked on Maxtor's website. (Maxtor acquired Quantum who acquired Plus Development) with no luck. > >Did you check the files at >"ftpdownload.maxtor.com/pub/QuantumProducts/Hardcard/" > Try <ftp://ftpdownload.maxtor.com/pub/Quantum%20Products/Hardcard/> Thanks Don. Joe

22 years, 6 months

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb