> From: Mattis Lind
> Thanks Noel for sorting this out.
Eh, de nada. But thank you.
>> I wonder if the ucode in the two versions is identical? The uROM chip
>> numbers should give it, (if they are the same on both versions, albeit
>> in different locations on the board), but I have yet to check. Does
>> anyone happen to know?
OK, so the situation here is pretty complicated. To start with / make things
worse, that CPU uses lots of PROMs. Lots and lots and lots and lots of PROMs.
For the data paths board (M7260), both major versions appear to contain the
same PROMs (going by the DEC part numbers), but the chip location (Exx)
numbers are all different.
For the control board (M7261), the C, E ('early' version) and F ('late'
version) etch revisions each contain mostly the same PROMs, but apparently
with slight differences between the sets of PROMs in each (as reflected in
different DEC part numbers). For details see:
http://gunkies.org/wiki/PDP-11/05#Control_PROMs
to which I have just added all the gory details.
As to getting the contents of all of them dumped in machine-readable form -
oi vey!
>> on the earlier version (prints for that version are in the GT40 prints
>> online
It turns out that I have hard-copy prints for the "C" etch revision of the
M7261, which do not yet appear to be online; the GT40 prints have the "E"
etch revision.
I will scan the pages for that revision of the board, and put them up 'soon'.
(I'm not doing the whole print set, it's about 1" thick, and most of them are
for other things anyway, like MM11-L memory, etc.)
Noel
Since a few days, my EXORciser Development System is finally able to boot from floppy diskettes.
Previous attempts have shown that the Motorola EXORciser M68SFDC1 floppy disk board used has a special modified ROM version. This was probably written for an 8-inch drive, in which the Write protect and Direction signal were inverted.
For the sake of simplicity, I have used free inverter on the board to invert the signals accordingly.
After adjusting the PLL frequency, reads and writes from the card are now error-free. And all without FDC, only clever programming by Motorola software engineers in the early 76?
Originally, the EXORdisk system was a dual drive with two 8 "units. This I have replaced with a double drive of two 5.25 inch units. An Epson and a TEAC, which can be jumpered to 360 rpm. Luckily, 2HD floppy disks are easy to R&W.
I also got a GOTEK floppy emulator running, which I can boot from. Thanks to Roland Huisman, Bitsaver has some interesting floppy disks that convert to HFE format work perfectly. This format makes the Gotek drive most reliable.
Now to my question. The vintage computer forum at http://www.vcfed.org/forum/archive/index.php/t-44638.html mentioned some interesting manuals. Archive.org has some manuals, Bitsaver does not have manuals about the M6800 development system.
If someone already owns scanned manuals to the following list
M6800 Basic Interpreter Reference Manual
M6800 Macro Assembler reference Manual
M68SFDU Exordisk 11/111 Disk `Drive Unit Maintenance Manual
M6800 Exorciser 11 User's Guide
M6800 Exorciser User's Guide
MEX68PP1 PROM Programmer Module Supplement M6800 Exorciser User's Guide
I would welcome any feedback or questions
--THOMAS
The famous Brigham Young University 3D graphics program, by Dr. Hank Christensen.
I am looking for the fortran source, it should be 7 files:
DISPLAY
SECTION
UTILITY
TITLE
COMPOSE
UPDATE
MOSAIC
Any docs related too.
Thanks for letting me beg.
Randy
Hi all --
I picked this DPS-6 up over the summer and it's just taking up space
(quite a bit of space) in the corner of my basement. This is a custom
16-bit, bitsliced, microcoded CPU from the early 80s with (I believe)
8mb of memory, and ethernet. It would originally have run a version of
GCOS. It's about the size of a large-ish minifridge, but a bit deeper.
It's also quite heavy!
It's a neat machine, but it's very obscure and unfortunately incomplete
(it is missing both mass storage and storage controllers). Otherwise,
it is complete and in good condition (albeit a bit dirty). So you can
see why you'd really want to have it in your collection .
If anyone's up for a project, drop me a line. Local pick up in Seattle, WA.
Thanks,
Josh
This is listed under the informative title "vintage computer":
http://www.ebay.com/itm/291934825422
which leads me to post it here under a more informative title, hoping that
someone here has a soft spot for Primes!
Noel
Someone on this list, I don't remember who, asked me if I was interested
in this, and then dropped it off. I've not gotten around to doing
anything with it, and I could use the space back. If anyone is
interested, holler.
HP 2250 Measurement & Control Processor
Pictures are the same ones that came with it. Photographer unknown.
https://photos.app.goo.gl/XjEj8E8vQ8KX9xcg8
If your interested in picking it up, email me directly, please. If you
have more information to share, respond to the list. :)
If anyone knows more about what this is, I'd be interested to hear.
I got these links from Mike on the SIMH list:
http://www.hpmuseum.net/display_item.php?hw=986http://www.hpmuseum.net/document.php?hwfile=5124http://www.hpmuseum.net/document.php?hwfile=4579
Mine is the "2250M" version. Apparently this heavy beast is "mobile"
because it has wheels on it. :)
Hello Everyone,
We found a PDP-11 QBUS card cage with a KDF11 and some other cards (RAM,
ROM, some basic peripherals) which included a DSD-4140 card.
Unfortunately, the DSD-4140 is missing one of it's microcode PROMs for
some reason.
Does anyone else have one of these cards? It'd be really helpful if we
could get some dumps of the 4 microcode PROMs so we can compare what we
have and look into replacing what we don't have with an adapted modern
part. (and if anyone goes to the trouble to read the 4 microcode PROMs,
there's also an 82S137 that deserves to be dumped).
Here's a picture of the card in question: https://i.imgur.com/tzYjPYF.jpg
Regards,
Joe Zatarski
Mainframes and other stuff
Recycle center in NC is willing to save out "stuff" for people.
No, no one can go in the back and scrounge.
No, he does not want a lot of emails from people.
Yes, he gets big blue and orange and beige 6 foot tall OLD mainframes in all
the time. They squash them at the moment.
Yes, he will package small orders, and will properly palletize larger
orders.
Local pick up will be available after the new year.
So, if u can send me a picture with description and some part numbers, along
with what you want to pay, I will consolidate things and make arrangements.
Please don't ask for specific boards from DEC; they don't want to go into
that much detail.
QBUS will mean nothing to him.
Big orange cabinet that says xxxxx is much more likely to get saved.
They are moving to new warehouse 1st of the month, so all this will start
happening after the 1st of the year.
Cindy Croxton
Electronics Plus
1613 Water Street
Kerrville, TX 78028
830-792-3400 phone
830-792-3404 fax
sales at elecplus.com
AOL IM elcpls
I am about to get our IBM1627 (rebranded Calcomp 565) going but the pens in
the case is quite dry. What is the best method to refurbish those? What is
the best solvent to get the old ink out? What ink to refill with?
https://drive.google.com/open?id=0B-rp4vyPPYu1ZjVRbnlyczV4czQ
About six months ago I struck a deal with a place down in California for
four Documation M1000's that I've been able to tell so far they all work but
I really don't have space for more than one. I've been trying to sell them
at a loss for months now over on the Vintage Computer Forums and Nekochan
(if you got here you'll find pictures) but no bites. I swear there were
people out there that were looking. Where did you folks go? Might anyone
here be interested? I absolutely refuse to put them on the curb.
-John