test-drb May 2010

test-drb@ccmp.vtda.org

189 participants
248 discussions

by mbbrutman-cctalk＠brutman.com

It's running! Telnet to 97.86.233.68 to take a look and help me test it. You can use the standard Windows telnet program, Putty, Linux, or whatever you have handy. Around 10 users can be on at the same time. When you sign on (no password required) there will be a little menu to help you waste some time. Some things you can do are see who else is on the server, view the machine type, ROM BIOS date and DOS version, check the TCP/IP statistics to see how much traffic it is handling, etc. There are some upgrades since the last time I ran this test (in Dec 2007): - The TCP/IP stack is much better - I'm doing 'telnet' negotiation to figure out the terminal type, turn echoing on, etc - Crude line editing has been added Right now it is running on my PCjr using a Xircom PE3 10BT. I plan to leave it up as long as it runs, or three days, whichever comes first. It is a PCjr so if there is a momentary delay, don't panic - it's probably just doing disk I/O. Backspace is a little dodgy .. it really wants ASCII 8 and a lot of terminals and emulators do ASCII 127 instead. Try variations with the shift and control keys if it doesn't work. Thanks, Mike

11 years, 8 months

Wait! There's more including MS-DOS 1.25!!!! was Sanyo MBC-550 (Yuck!) software available

by rigdonj＠intellistar.net

I'm still digging. I found more 550 stuff. I think this is everything that came with the 550. Here's a chance for you 550 owner's to get the whole set at one shot! Original DS-DOS box and invoice. Original Sanyo Easywriter ver 1.3 disk Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4 are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1 Original Sanyo disk box with all three original disk of set A, WordStar and CalcStar and a backup copy of DS-DOS. Two card board dummy disks used to protect the floppy drives duing shipment. Joe > >A few weeks ago we were talking about the Sanyo 550 series and someone mentioned one of the alternates operating systems that supported 80 track drives in the 550. I said that was DS-DOS by Michtron. > > Today I found an old Sanyo disk package with four disks for the 550. One of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the other is a disk of misc utilities. The first three are original disks. In additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that came with the 550. If anyone wants them, trade me something I can use and they're all your's. > > Joe

11 years, 11 months

IBM 5151 green phosphor monitors for sale

by sellam＠vintagetech.com

I have a limited number of IBM 5151 monitors for sale. This is the classic green screen monitor that shipped with the basic IBM PC 5150. Condition is adequate. They are dirty but I will clean them up before shipping out. Will test for basic functionality. No burn-in or other problems, but no warranty either. The price is $30 each plus shipping. First come, first served. Please contact me directly via e-mail. Thanks! -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

12 years

Gooey TU58 rollers

by ajp166＠bellatlantic.net

> >Subject: Re: Gooey TU58 rollers > From: "Ethan Dicks" <ethan.dicks at gmail.com> > Date: Tue, 28 Aug 2007 17:39:20 -0500 > To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > >On 8/27/07, B M <iamvirtual at gmail.com> wrote: >> I am trying to get a Vax-11/750 machine up and running. It looks like the TU58 drive >> is suffering from the 'gooey roller syndrome'. > >Unsurprising. > >> I see that people have successfully used 1/2 inch (ID) Tygon tubing to replace the >> goo. Is there any specific type of Tygon tubing (eg. R3603, R2000, etc.) that is used? > >I don't know the particular variety I used in mine - I just went to >the Lowe's down the street and bought a foot of 1/2" ID tubing - >whatever they had on the shelf. I was unaware of a large amount of >varieties of tubing, so I just used what they had in stock, and it >worked perfectly. > >-ethan I started that many years ago like 1995ish. I spec'd Tygon (brnad name) as that was available to me. Most any generic Vinyl tubing works so long as it fits tight and has enough wall thickness. After about 10 years it tends to get hard, the fix is obvious. Allison

12 years

Texas Instruments 960B

by aek＠bitsavers.org

> does anybody have bits for the TI 960B (not 960A) minicomputer, e.g. > software, schematics etc. ? I have some additional material on the 960 that isn't up yet on bitsavers. The 960 and 980 share some peripheral interfaces. Did you end up with the 990 system as well?

12 years, 2 months

NEC Spinwriter 5525 available

by iamvirtual＠gmail.com

[I hope this is on-topic; I believe the machine is at least 20 years old] I have a NEC Spinwriter 5525 printer that is available for the cost of shipping (free if you pick it up). The printer is a wide carriage and appears to have a RS232 serial interface. I do not know if the printer works or not. The machine is located in Langdon Alberta Canada (postal code is T0J 1X1) which is approximately 10 minutes east of Calgary. The machine is rather heavy. I estimate 50 pounds or more. If there is no interest, the machine is headed to the e-waste recycling. I can send pictures upon request. Contact by e mail: i a m v i rt ihatespam u al @ @ @ g ma il . c om <-- remove spaces and ihatespam Thanks! --barry

12 years, 5 months

Has anyone ever heard of theProtec Microsystems PRO-83?

by rdcoll＠hotmail.com

Hello everyone, I just joined this mailing list today on the advice of more than one vintage computing contact. I was wondering if anyone could tell me anything about the Protec Microsystems PRO-83 Z80 Single-Board Computer. I have conducted an exhaustive search of the Internet and found only two sites (one from a surplus store and a picture of it from a museum). I would appreciate any information available, especially information regarding the power supply and peripheral devices. Thank you very much. Rob _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx

12 years, 6 months

HP 3000 micro gx booting MPE/V, Help >>>>

by g-wright＠att.net

Any Hp Mpe folks left out there I have non working 3000/37s with possibly good drives and a 3000 micro GX that works but has a bad drive. I have tried to boot the micro GX from the 3000-37 drives and get this far. ---------------------------------------- Cold Boot > HP 32033G.B2.02 Performing a Coldstart Following Volumes not found MH7957U1 List Volume tables ? ---------------------------- Seems to freeze after that. It does this on 2 different drives. Is this even possible to do ??? Does anyone have a OS tape for one of these ??? and which manuals cover the boot menu and/or startup. I would like to get both going but the 3000-37's have dead mother boards. Stan Sieler, are you still around. Seems like every search I do comes up with your name and advice. Thanks, Jerry Jerry Wright g-wright at att.net

12 years, 6 months

HPIB cables

by donm＠cts.com

I have a couple of HPIB cables available at $15 the pair, shipped. They are: 1 HP10833A ~42" 1 HP92220R ~12" The 92220R has a right-angle connector at one end and the usual straight connector at the other. (I wonder if the 'R' indicates a right hand connector?) First come, first served. - don

12 years, 7 months

Century Data T2000 exerciser

by nasim786＠earthlink.net

Hi, This is a belated response to a post you made here: http://www.classiccmp.org/pipermail/cctech/2003-February/010641.html I happened upon it while doing a 'for fun' search on the net for anything doing with good ol' Century Data, my employer when I was young. Couldn't resist responding to the post, even if it was half a year late! The exerciser that you have is/was for the Trident series of hard disk drives (predecessor to the Marksman). I was the main (in fact, pretty much the ONLY) technician at Century Data/Calcomp, for these exercisers back from the late 1970's to the mid 1980's, when they were phased out. I retired in 1985. Have fun! (BTW, where'd you find one of these dinosaurs??) Take care, Nasim

12 years, 7 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb May 2010