Vintage Computer Festival 3.0
October 2-3, 1999
Santa Clara Convention Center
Santa Clara, California
The Vintage Computer Festival is once again proud to present a tour
of The Computer Museum History Center in Mountain View, California.
The Computer Museum boasts the worlds largest collection of historic
computers, including some one of a kind machines. If you've never
visited the History Center then you should take advantage of this
opportunity.
Two tours are scheduled for 3:30pm on both Saturday and Sunday of the
Festival based on demand. If there is not enough demand for two
separate tours then all reservations will be consolidated to one tour
on Sunday, October 3. Each tour will last approximately one hour.
The tour is open to most everyone but you must register in advance
to reserve a seat on the bus which will be taking participants to the
History Center from the Santa Clara Convention Center. Since the
History Center is located on a United States military base (Moffet
Federal Airfield) foreign nationals will have to RSVP as soon as
possible so that their identification can be processed. United
States citizens and those with green cards should not have any
difficulty registering.
Please note there is a charge of $5 for the bus ride.
Complete information on making a reservation can be found on The
Computer Museum's web site:
http://www.computerhistory.org/events/vcf_10021999/tours.page
Spread the Word!
Remember to tell a friend about the Vintage Computer Festival. This
is a great event for the whole family since kids are admitted free.
There will be plenty of fascinating old computers on display that
will help introduce computing to a budding young mind.
Sell Your Computer
There are still a few booths available in the Vintage Computer Flea
Market but they are going fast! If you have a bunch of old computers
sitting in your closet, or want to cash in on the computer collecting
craze, there's no better place than the VCF Flea Market to sell your
old computers. Booths are $125 for the entire weekend. Don't wait
too long to decide, this price is only good until September 15.
You can also sell your items on consignment with the VCF. It's hassle
free! See http://www.vintage.org/vcf/vendor.htm for complete details
on vendor booths and consignment sales.
We'll see you at VCF 3.0! And remember, tell your friends!!
To be removed from this automated notification service simply reply to this
message with the word REMOVE as the first line of the message.
Vintage Computer Festival 3.0
October 2-3, 1999
Santa Clara Convention Center
Santa Clara, California
http://www.vintage.org/vcf
Well , I made a cable with the appropriate pin-out and
turned the thing on... here's what came on the terminal:
KA630-A.V1.3
Performing normal system tests
7..6..5..4..3..
Tests completed
>>> boot
2..
?54 RETRY
2.. (after a long time, I hit the halt button)
?02 EXT HLT
PC = 00001AA8
>>> boot dua0
2..
?42 NOSUCHFILE, DUA0
?06 HLT INST
PC = 00000EE6
Failure
>>>
Does that mean that the drive is busted, or just that there is no OS?
The drive spins up and it sounds like it is seeking after issuing
the boot command.
Carlos.
It appears the HP 2114 on ebay sold from what I hear, it's no longer listed
in any case. Just out of curiousity, did anyone here on the list get it???
Jay West
<>>> boot
<
< 2..
< ?54 RETRY
<
< 2.. (after a long time, I hit the halt button)
< ?02 EXT HLT
< PC = 00001AA8
<
<>>> boot dua0
<
< 2..
< ?42 NOSUCHFILE, DUA0
< ?06 HLT INST
< PC = 00000EE6
Either the drive is not dua0 or no OS on it.
Allison
Rumor has it that Fred Cisin (XenoSoft) may have mentioned these words:
>On Thu, 16 Sep 1999 CLASSICCMP(a)trailing-edge.com wrote:
>> This may be going counter to the tone of the discussion, but...
>> If the goal is the least-hassle way to read and write Apple ][ disks, isn't
>> the best solution
>> AN APPLE ][ ?
>Absolutely.
>
>> Besides, none of these other solutions are more than 10 years old!
>
>Apple Turnover, Matchpoint?, Quadlink, Diamond Trakstar 128, and Copy2
>Option board are all over 10 years old. Most of them were DISCONTINUED
>more that 10 years ago.
Not only that, but IIRC the original gist of the discussion wasn't "how to
read/write Apple ][ disks..." but was: "how to read/write Apple ][ disks on
an IBM PC."
For that, the Apple ][ really isn't the best solution.
Besides, Apple ][s are really tough to find up here... my buddy rescued a
//gs, tho...
[[ and later wondered how much he could get for it when he was hard-up for
cash...
Him: How much could I get for it?
Me: Maybe $20 tops... *if* you find someone interested in it.
Him: What're my chances of finding that someone?
Me: About the same odds of you gaining 600 pounds overnight and winning the
Mr. Olympia title. (he's had a lot of gastro-intestinal surgery over the
last 2 years -- he's over 6 foot tall and weights ~130lbs.)
Him: You've got to be kidding! It's got a hard drive...]]
Yea, he's still my friend, but as he owes me a lot of $$$, I'll prolly give
him the $20 for the machine (off his tab, of course... ;-)
Anywho, IMHO, YMMV, ABAF and all that jazz...
Roger "Merch" Merchberger
--
Roger "Merch" Merchberger --- sysadmin, Iceberg Computers
Recycling is good, right??? Ok, so I'll recycle an old .sig.
If at first you don't succeed, nuclear warhead
disarmament should *not* be your first career choice.
>Well, modern single-chip microcontrollers are very cheap, and they're
>easy to use. Probably less hassle than attempting to (legally) clone the
>Apple disk ][ controller.
This may be going counter to the tone of the discussion, but...
If the goal is the least-hassle way to read and write Apple ][ disks, isn't
the best solution
AN APPLE ][ ?
Besides, none of these other solutions are more than 10 years old!
Tim.
Hope you consider this message an encouragement.
It is directed to those are are new to the hobby or
those of you who are disappointed because you
still haven't found that special something even
though you have spent much time trying to find it.
Have we dried up sources of old computers? Hardly.
Can you still hope to find that missing system/
software/manual/etc.? Indeed.
The proof I offer is the PDP-9 that Merle Pierce, of the
Rhode Island Computer Museum, Inc., recently
told us about.
There weren't many of them to start with and it is
30 years old so what are the chances there would
still be one working everyday in a building in
Philadelphia. Pretty low, but still, against the odds
it is now safe for another 130+ years in the museum's
collection.
A while back a the fellow from the company in
Philadelphia that used the 9 contacted me. He
came to me because his 9 wasn't working and
upon doing a search of the web he discovered I
had a reference to PDP-9s since I used to have
one.
He asked me for help in fixing his, but I was no
help. I did mention how much I'd like to have
another one and that was end of our correspondence.
About 7 weeks ago he contacted me out of the
blue and offered the 9 and other gear if
I would come and pick it up.
Tempting. The customs and other regulatory
hassles made the trip impossible so I offered
the gear to Merle and the rest is history.
Seek and ye shall find. Really, lots and lots of
wonderful old small and big computers are
waiting to be discovered.
Yours in good faith.
----------------------------------------------------------------------------
-------------------------------
Kevin Stumpf * Unusual systems * www.unusual.on.ca
+1.519.744.2900 * EST/EDT GMT - 5
Collector - Commercial Mainframes & Minicomputers from
the 50s, 60s, & 70s and control panels and consoles.
Author & Publisher - A Guide to Collecting Computers &
Computer Collectibles * ISBN 0-9684244-0-6
.
>Ok... you've got me curious. (swinging wildly toward being O.T.)
>What was there about this particular auction
>that might have led to a complaint which would have resulted in it being
>cancelled? (obviously, I did not see anything that threw up a flag)
I really haven't been following the entire thread, so don't know what
specific auction it was about -- I was just responding about the early end
to an auction in general. So I can't tell what might have been wrong with
it, if anything.
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
Hello,
First question for the list, does anyone have a technical manual on the
RF72 (1GB DSSI drive)? The questions I have are:
1) What function does the blue wire in either pin 1 or
pin 5 (depending on which is #1) of the power connector
provide?
2) What function does the three position dip switch provide?
(I've got a couple drives and some have switches set and
others don't.)
On a related topic, is there any documentation on the VAX "drive control"
thingys?
Various pieces of documentation I have offer tantalizing bits but I can't
find the definitive definition. The Sigma docs talk about "active" and
"passive" control panels, one of my BA213's has a 3 way DSSI panel with
plugs for plastic "unit" plugs, one of my BA213's has a dual unit and the
cab kit for SDI drives. My BA123 world box has four installed (not hooked
up to anything) These latter ones appear to be "passive" (they have a 10
pin connector on them as well)
--Chuck
Hi Group:
I have a friend who is looking for pdp-15 docs.
Anybody have any, or pointers to any on the web?
Kevin
==========================================================
Sgt. Kevin McQuiggin, Vancouver Police Department
E-Comm Project (604) 215-5095; Cell: (604) 868-0544
Email: mcquiggi(a)sfu.ca