Who was the person from, I think Duluth, who wanted the Sun 3/50? I have it
now, without the keyboard which I need for my 3/60 system. If you're still
interested in it, just let me know and we can arrange a time for you to
come pick it up.
-Lawrence LeMay
lemay(a)cs.umn.edu
I'll have to check tonight, but I'm 99.9% sure that I have several spare
G111 and G233 boards.
Got anything particular on your trade list?
Jay West
-----Original Message-----
From: Lawrence LeMay <lemay(a)cs.umn.edu>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Monday, July 12, 1999 9:03 PM
Subject: looking for G111 & G233
>Well, I went and purchased a 8K core memory board on ebay, mainly
>because I recognized it as a G646C core memory plane from a
>pdp8/e or /f.
>
>If someone has the G111 and G233 boards that should go with this,
>but not the core memory, then perhaps i can trade you something
>for them.
>
>-Lawrence (That core plane will work in a Muniac computer too???) LeMay
>
Hi,
Can anyone confirm that the Spectrum +3 (I have a couple with "broken" floppy
drives) uses the same drive mechanisms as the Amstrad CPC6128?
If so, I will order some replacement drive belts for my +3s, since the belt
perishing is almost certainly the problem.
With this in mind, does anyone else need some replacement drive belts? The
price is about 1.75 pounds each (I'm in the UK) if I order five or more. If
so, please let me know.
-- Mark
I don't know how this message got to me. As you can see it got sent to the
wrong address.
ron fraser
----------
>From: Derek Peschel <dpeschel(a)u.washington.edu>
>To: "Discussion re-collecting of classic computers"
<classiccmp(a)u.washington.edu>
>Subject: Re: Classics for sale!
>Date: Mon, Jul 12, 1999, 3:45 PM
>
> This relates to Ron Kneusel's auction.
>
> Ron, I couldn't reply to you -- your rkneusel(a)mcw.edu address didn't work.
>
> Does the Apple version of muMath require the native Apple DOS or is it a CP/M
> program?
>
> Do you have a list of the Kaypro original software and the manuals? (It
> would probably be too much work to list the unoriginal software you're also
> selling.)
>
> Thanks,
>
> -- Derek
>
>
>
>
I have:
Hard Disk Operating System
Hard Disk Initialization System
ST80/III
Scripsit
Blackjack
Taipan
ExtBal
Host 480
Combat
Delay
TRSDOS 1.3
General Ledger
I also have DBASE II, that I think will run on a III.
All I have now is a model 4P, and I don't know whether I can format a disk that will work on a III. Any ideas? My 4P manual is no help on this one. Do you know whether I can use the 22Disk utility to read these files on my PC and mail them to you? This has worked well for me on certain formats (Osborne, Kaypro, etc.).
Wayne
>>> "Jason <the GeNeRaL>" <roblwill(a)usaor.net> 07/13 1:08 PM >>>
Does anyone have any Programs for the Model III on disk That they would
either want to sell or cold email me a copy (teledisk)? I have some various
old PC and a few old Mac programs that I'd be willing to trade (either
through email or snail mail -email me for a list of what I have, or I could
post it to the list).
I'm mainly looking for word processing/spreadsheet software and maybe some
games.
ThAnX,
-Jason
!
!
!
I have in my possession a Sun 4/110 main unit in unknown operating
condition. It appears to be made as a desktop unit but has a factory set
of pieces that make it stand upright on the floor. As far as I can tell
it was pulled directly from service but has no mouse, keyboard, monitor,
etc. it doesn't appear as if anyone has gotten inside either so i'm
assuming it's a complete unit.
Anyone want to make me an offer on this? I am always in need of common
PC hardware that I could trade for the thing, especially SCSI cdroms and
hard drives (preferably 1gb or bigger). Remember that you'd be getting
basically a "pig in a poke" as I have no equipment to use to set it up
or test it with so it's strictly on a chance that it might be fully
operational. The unit is fairly heavy but probabl not more than 45 lbs.
--
Russ Blakeman
Clarkson, Ky USA
Remove "nospam.' in email address to reply
Just yesterday I handled a copy of the doc's for the CP/M version. This
implies that it was a CP/M program. I doubt that MuMath/MuSimp was
generated as an apple version as well, though stranger things have happened.
It wouldn't surprise me to find a version of Apple diskettes for use with
Apple CP/M.
Dick
-----Original Message-----
From: Ronald Fraser <therunk17(a)earthlink.net>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Tuesday, July 13, 1999 8:29 AM
Subject: Re: Classics for sale!
>I don't know how this message got to me. As you can see it got sent to the
>wrong address.
>ron fraser
>
>----------
>>From: Derek Peschel <dpeschel(a)u.washington.edu>
>>To: "Discussion re-collecting of classic computers"
><classiccmp(a)u.washington.edu>
>>Subject: Re: Classics for sale!
>>Date: Mon, Jul 12, 1999, 3:45 PM
>>
>
>> This relates to Ron Kneusel's auction.
>>
>> Ron, I couldn't reply to you -- your rkneusel(a)mcw.edu address didn't
work.
>>
>> Does the Apple version of muMath require the native Apple DOS or is it a
CP/M
>> program?
>>
>> Do you have a list of the Kaypro original software and the manuals? (It
>> would probably be too much work to list the unoriginal software you're
also
>> selling.)
>>
>> Thanks,
>>
>> -- Derek
>>
>>
>>
>>
The John Bell 6502 board used to be advertised in the back pages of pre-1980
Byte magazines, along with a selection of other JB cards. I seem to recall
the 6502 card was minimal-chip system essentially aimed at "embedded
processor" type applications. So I don't think it came with a preprogrammed
EPROM; you were expected to develop your own firmware for it. They had
another bare board for a video display terminal based on an Intel 8085
(basically an implementation of the circuit in an Intel application note)
and they also sold some low-cost interface cards for Apple II parallel
interfacing using the 6522 VIA chips that were then popular in Commodore
Pets. I remember building a couple of those JB interfaces for lab
experiments. I wonder who "John Bell" was and whatever happened to him?
Arlen Michaels
> -----Original Message-----
> From: Marvin [SMTP:marvin@rain.org]
> Sent: Sunday, July 11, 1999 9:40 PM
> To: Discussion re-collecting of classic computers
> Subject: Other Bazaar Boards
>
<snip>
> Another board that I picked up is a John Bell Engineering 6502
> Microcomputer. At this point, I don't know if it works, and a couple of
> the
> chips are missing including the EPROM. I have the docs for the 2716 EPROM
> programmer, but didn't find the board.
>
<snip>
--
Arlen Michaels amichael(a)nortelnetworks.com
Nortel Networks, Ottawa, Canada
I had one in my possession back in the days when it might have been of use,
but since it wasn't at that moment, I didn't pursue it. It's not the SRAM I
wanted that week, but I remember it was an odd DRAM or shift register or
some such. 22 pins was not a popular package.
Dick
-----Original Message-----
From: Dave Dameron <ddameron(a)earthlink.net>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Monday, July 12, 1999 7:25 PM
Subject: Re: Can anyone ID these SEMI chips?
>At 11:24 PM 7/11/99 -0700, Doug wrote:
>>Hi everyone,
>
>> These are 22 pin chips, made in 1977, but I can't
>>seem to find any chip manufacturer named SEMI or
>>any reference to this 4200 number.
>>
>> Can anyone identify these chip?
>>
>I don't know that part number (a 4k dynamic ram like Intel 2107??), but the
>company was "EMM Semi", a part of
>Electronic Memories & Magnetics. They were in Phoenix, AZ.
>-Dave
>
On Jul 12, 20:51, Zane H. Healy wrote:
> Subject: Re: DEC H7861 Power Supply Question
> >Does anyone know the +5V and +12V current ratings of a DEC H7861 (Rev B,
ECO
> >1) power supply?
> >
> >Thanks,
> >Bill
>
> Erm, might help if you mentioned WHAT it came out of, so we know if we've
> got doc's on it :^)
It's the PSU from a BA-11S, as in a PDP-11/23plus. 5V @ 36A (min load 2A)
and 12V @ 5A.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
