So I've captured a few new machines - now all I have to do is figure out what to do with them.
1. Fortune 32/16 - System, seperate SCSI tape drive, no HD. No software. Help!
2. 7 (count 'em, 7) Wang systems. I'll have model numbers &such tomorrow (something along the lines
of PC-02). Only three monitors, only one keyboard. Two 5 1/4 flopies per, no software. Any help
would be a start. Most have Network cards of some kind - is this ethernet? Each has two BNC
connecters. Almost looks like a daisy-chain system of some kind.
J. Buck Caldwell
Engineer - Technical Support - Webmaster
Polygon, Inc. email:firstname.lastname@example.org phone: (314) 432-4142
PO Box 8470 http://www.polygon.com/ fax: (314) 997-9696
St. Louis, MO 63132 ftp://ftp.polygon.com/ bbs: (314) 997-9682
A while back there was a thread re an Archive board ID but I've been unable to
find it in my archives. It seemed at the time similiar to a card I have.
It's an 8 bit card with a 25 pin F port and a 50 pin internal; it's got an FCC
ID # EAX6GP-SC400S which I haven't checked yet since most of the time
they're useless. Someone had written 102 A in marker pen.The most important
chip is one labelled Archive PT and at the bottom 8517A. It has an E-Prom
m5l2764k , another 64 pin chip has 4 numbers , the top one is R6511AQ and the
bottom one is 8439 (always had trouble identifying chips based on labelling).
It has IRQ stencilled jumpers 2-7 and 5 is jumpered. It has DRQ (DMA ?) 1,2,3
, DACK 1,2,-3 with 1 jumpered on 1 and 3(1), another set of 7 jumpers labelled
A3-A9. There are 5 LEDs labelled DS1-DS9. There's a couple of other jumpers and
the rest is mostly low powered Schotskys.
Anyone with any idea on what this is ?
From: Allison J Parent <allisonp(a)world.std.com>
To: Discussion re-collecting of classic computers
Date: Saturday, 1 August 1998 13:17
Subject: Re: BART and PDP8's?
>< A few years ago, I heard a rumor bandied about somewhere on Usenet that
>< BART (Bay Area Rapid Transit, a rail system running around some of the
>< San Francisco Bay) was, even to this day, controlled by pdp8/e systems.
>< Can anyone lend any credibility to this rumor? Any chance of scoring
>< some PDP8 equipment if they decide to upgrade their system sometime soon
>THey are real and used to control signs and a few other things. Not
>likely in the near future from what I've heard.
Down here in Tasmania, Australia all the traffic lights are still controlled
by pdp 11/43s.....
> Believe it or not there are still many people out there with old
(ancient) rotary dial telephones.
Hey, I still have one, in my computer room (ex-spare bedroom) at home.
It's not so ancient, anyway, it's worked for the last 30 years, probably
good for another 30. The bell is disconnected so it doesn't ring, an
< Allison, does the TK50Z bare drive have a 50-pin connector as compared
< with a lesser (26-pin) connector on the non-SCSI drives?
The actual drive is the TK50. There is a scsi bridge to make it a tk50z.
< Aside from the drive and a power supply, what does the pizza box contain
What are we talking about a tk50z in a ba42 box?
I want one...I'll pay shiping and the $4.98...PLease email me with info...
From: Max Eskin <maxeskin(a)hotmail.com>
To: Discussion re-collecting of classic computers
Date: Thursday, July 30, 1998 11:27 AM
Subject: Re: Attention Collectors . . .
>What is a multispeed anyway? Is it a turbo XT? How much does it
>>If anyone really wants one of these I can pick two up (unknown
>>at a local thrift store for $4.98 each and ship it at your cost.
>>Sam Alternate e-mail:
>> September 26 & 27...Vintage Computer Festival 2
>> See http://www.siconic.com/vcf for details!
>> [Last web page update: 07/26/98]
>Get Your Private, Free Email at http://www.hotmail.com
Aw crud! I didn't mean to send this to the list :)
> -----Original Message-----
> From: Dellett, Anthony [mailto:Anthony.Dellett@Staples.com]
> Sent: Friday, July 31, 1998 11:08 AM
> To: Discussion re-collecting of classic computers
> Subject: RE: Looking for S-100 Systems
> Definately. I have seen you on the classicmp mailing list. Sorry about
> sounding like a bonehead with the PDP/11 boot problem. It's
> not my bag.
> Tony Dellett
> On Tue, 21 Jul 1998 12:48:56 Tim Shoppa wrote:
> >In article <6p2mi9$1jg$1(a)nnrp1.dejanews.com> you write:
> >>I'm looking for a few old S-100 systems from my old high
> school days.
> >>Cromemco S-100 systems (Z2 mostly)
> >I have a Z2 and several Z3 systems, all located in Bethesda MD.
> >Tim. (shoppa(a)triumf.ca) (301-767-5917)
The experience I've had was in the apartment where I live, where it
is best to make stuff as opposed to buying it because it is difficult
to fit storebought things as efficiently. And it probably looks
better. Plywood is probably not the best shelving material; I don't
know much about this stuff, but wouldn't solid wood be stronger?
>> drill the appropriate holes, and insert bolts in strategic locations.
>> That gorilla rack will probably cost more.
>Um, not really. I built a nice 8' x 2' 4-shelf plywood rack and it
>up costing me $80 in lumber and supplies, plus a night to hammer it all
>together. I got twice the space a Gorilla rack would have given me but
>eight times the hassle.
>Sam Alternate e-mail:
> September 26 & 27...Vintage Computer Festival 2
> See http://www.siconic.com/vcf for details!
> [Last web page update: 07/26/98]
Get Your Private, Free Email at http://www.hotmail.com
At 10:31 30-07-98 -0700, Sam Ismail wrote:
>On Wed, 29 Jul 1998, Uncle Roger wrote:
>> So, I guess my question is, how to others store their collection? Keep in
>> mind that I'm in San Francisco, and that Earthquakes are an issue. Thanks!
>Unfortunately, mine is all stored in big heaps, one unit stacked upon the
>next. I have little things like laptops and cables and crap like that in
>boxes to make them stackable. Big things like S-100 and PDP boxen are
>stacked about 5 or 6 feet high with an unstackable terminal to cap it off.
>Little things are crammed into whatever nooks and crannies are left over.
>Things like ASR33's are always a problem. I had shelf space at one point
>but it is now taken up by the all-in-one systems like the PETs and Lisa
>and some terminals. Now all the shelf space is crammed.
>Its a nightmare.
Amen brother! I'm STILL trying to get all the accumulation of 'stuff' moved
out of our old house into the newer house. 21 years worth of 'stuff'. Two
weekends ago, a work colleague and I spent 4 hours on that Saturday
afternoon moving only *part* of my library. That work consisted of two full
loads in my wife's Jeep Cherokee and our friend's Ford Ranger SUV. Books
and old magazines are really heavy to move up two flights of stairs. I
think we got maybe a third of the library moved. We were almost dead after
that. Bev and I have been making small trips in the evenings after supper
to take the antique radio collection and tools over to the house and we're
making a little bit of headway at that. If we had originally hauled
_everything_ over in one or two shots, stuff would be piled up in such a
manner I could not ever sort and arrange it properly.
I guess the lesson learned here for us is to consider what we keep and pass
on to someone else stuff we really should not.
Another lesson is _don't_ pack it in so danged tight that if we do have to
move (or more regrettably, have to pickup after an earthquake or flood)
that the moving task is nearly impossible to do. Also, I cannot find stuff
that I _know_ I had put away in the pile.
I can't believe all the crap I'm dragging out that I squirrelled away over
the last two decades. A part of it is actually heading for the dumpster and
most of you would certainly agree if you see it.
>I don't recommend this sort of storage arrangement. I don't know where
>anything is and couldn't get at it anyway even if I did. But it allows me
>to store the massive amounts of computer junk I have until I can find a
>suitable space to do it justice.
Agreed re: not recommended! I thought we could find a house with more
space for my stuff but nothing that was an affordable price came up for us
around here. The new place is just a little bit smaller, now I'm having to
sort out stuff to sell, swap or otherwise get rid of. As I said before,
some of the old computer stuff I need to divest will be mentioned to you
>What I recommend to Roger is to first, add an extra support to your
>shelves, and make sure you are anchoring them properly with drywall
>anchors (if you are mounting the shelves to drywall). Then, pack your
>laptops and such inside boxes with some foam in between. That way, if
>there is another episode, or an earthquake hits and the computers fall, at
>least they will be moderately protected from damaging each other when they
>hit the floor. You also might want to consider getting some netting to
>prevent the boxes from falling in the first place (in an earthquake at
>least). I imagine this would cost some bucks but maybe Target has a good
>net material cheap in the garden section. Try Home Depot for ideas also.
Good suggestions. The other msg in this thread mentioned chicken wire as a
netting-type material too. Although we don't have a real earthquake problem
in Western NY State we still do feel them once in a while. Tornados and
blizzards are the natural problems we have to deal with more often.
I do make sure my shelves are tied to a wall, rafters/floor joists above
them or simply themselves together in a mutually supportive manner just in
case. If a moderately Big One ever occurred out here, we would be in great
trouble as the earth deep down is quite solid and even small local quakes
would hurt us more. That Madrid Fault in the Midwest is being watched with
a wary eye by some earthquake specialists at the Eathquake Center at the
University of Buffalo. Jamestown is sitting on the same tectonic plate. We
even feel a jiggle from 3.5 quakes that hit 400 or more miles away out east
of here. I know what a 3.6 is as I sat in the dinning room of my best
friend and her husband's house up in Orinda, California when one hit in
August, '87 centered about 10 or 20 miles away. I really hope and pray that
you folks on the Left Coast are not hurt by any nasty quakes that occur.
Christian Fandt, Electronic/Electrical Historian
Jamestown, NY USA
Member of Antique Wireless Association
> Of course, you might as well buy pipe and strong wood from home depot
> drill the appropriate holes, and insert bolts in strategic locations.
> That gorilla rack will probably cost more.
You'd be hard pressed to beat the price and still have it look good.
I forget if they were $79 or $89, I got some dirty looks by climbing
on on that was at floor level to see how stiff they were. They are.