Even though I've been quiet, I have been making slow progress on the QSIC in the background.? For those who've forgotten what the QSIC project is about, here's the description: http://pdp10.froghouse.org/qsic/html/overview.html We've been working away on getting communications with the SD card working and that's basically there now.? It initializes and reads and writes blocks.? I've also connected it through an async FIFO to the minimal RK11 controller I had working before and that's mostly working.? That is, it can read and write blocks under control from the QBUS PDP-11 as if it were a real RK11/RK05.? What more could you ask for? Well, I could ask for a lot more really but that's pretty good.? There's a lot of RK11 functionality that I haven't implemented yet and all sorts of configuration options we need to get in there.? Also, there's a bug where it sometimes scrambles data so it's not quite ready to boot and run a real OS yet but it's getting awfully close. Here's a picture to my test setup: http://pdp10.froghouse.org/qsic/qsic-setup.jpg And a picture of a test of some spray-on glass frosting used as a light diffuser on the indicator panel.? In this picture you can also see the new LEDs I found that are a much better color match to the old incandescent bulbs than the LEDs I picked for my first attempt. http://pdp10.froghouse.org/qsic/frosting.jpg Now for the request.? I've decided that I'd like to put a soft-processor in the FPGA to handle a bunch of things (configuration duties and the USB protocol being two of the big ones).? My preference would be for this soft-processor to be a PDP-11.? Surely there's hack value in using a PDP-11 as the I/O processor for a PDP-11 but there are practical advantages to this as well.? For one, we're already familiar with it and have a suite of development tools.? Also, I can re-arrange the I/O devices I intend to give to this soft-11 and put them directly on the QBUS instead and do initial development there. I'd rather not get diverted by yet another substantial development project so I'm looking for a decent little FPGA implementation of a PDP-11 that I could just pick up use for this purpose.? Something that's already debugged.? I'm thinking closer to an 11/04 than an 11/70 and likely just running out of block RAM on the FPGA. Thanks for any pointers to such an implementation and thanks to everyone who's given support and assistance as Noel and I have poked along on this project. Dave