3 Jan
2018
3 Jan
'18
9:11 a.m.
From: Ethan Dicks
The rod is also smaller by quite a bit, but I
don't have one in front
of me to measure.
The two feet are quite different. The smaller one on the extender is 5/16"-18
(i.e. UNC Coarse thread); the larger one under the cabinet is 1/2"-13.
Replacements can easily be had from Vlier: Vlier part numbers are FSE302S
(for the extender feet), and FSE306S (for the main feet).
We really ought to do a group bulk build of the extension castings; if we get
a reasonable size order together, they shouldn't be that expensive. Ditto
for the special bolt needed to hold them to the H960.
Noel
3 Jan
3 Jan
12:14 p.m.
I would be interested in a few dozen of the cabinet feet and maybe 18 for
the stabilizer feet.
I seem to recall looking at a few of the stabilizer feet a few months ago
and noticing there were a few different versions. I will try to find my
cabinet handbook and see what it says, and supply DEC part numbers if
anyone is interested.
Paul
On Wed, Jan 3, 2018 at 11:11 AM, Noel Chiappa via cctalk <
cctalk at classiccmp.org> wrote:
From: Ethan
Dicks
The rod is also smaller by quite a bit, but I
don't have one in front
of me to measure.
The two feet are quite different. The smaller one on the extender is
5/16"-18
(i.e. UNC Coarse thread); the larger one under the cabinet is 1/2"-13.
Replacements can easily be had from Vlier: Vlier part numbers are FSE302S
(for the extender feet), and FSE306S (for the main feet).
We really ought to do a group bulk build of the extension castings; if we
get
a reasonable size order together, they shouldn't be that expensive. Ditto
for the special bolt needed to hold them to the H960.
Noel
2326
days inactive
2326
days old
1 comments
2 participants
participants (2)
-
jnc＠mercury.lcs.mit.edu -
useddec＠gmail.com