I am in Charleston,SC, where are the printers located? Steve -----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Curt @ Atari Museum Sent: Friday, February 22, 2008 8:59 AM To: General Discussion: On-Topic and Off-Topic Posts; bbellamy at palmettochevy.com Subject: Re: Available: DEC LA120 printer I see them on Ebay for about $25 each, the problem is they are big and heavy and expensive to have to ship so their value is rather low, they are beautiful pieces of equipment, hopefully some around the South Carolina area is a Dec collector and would buy them for you, but don't expect much more then $25 or so each. Curt Buddy Bellamy wrote: JUST GIVE THEM AWAY. IS THERE ANY VALUE IN THESE PRINTERS?

What a steal! Its only 3500 lbs..... -- "The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download <http://www.xmission.com/~legalize/book/download/index.html> Legalize Adulthood! <http://blogs.xmission.com/legalize/>

Bob Rosenbloom wrote: Actually the front panel looks more like an 11/24. On the 11/44 the keyswitch is on the left side.

Don North wrote: that was what I thought. too bad you can't see the side - there would be a another slot if it's a 730. but I thought some 44's had TU58's also. -brad

I have the controllers and cables for those drives which I bought from him. He's a pretty good guy. The power requirements for the drives was restrictive for me. Rob On Feb 22, 2008, at 9:01 AM, Curt @ Atari Museum wrote: Rob Borsuk email: rborsuk at colourfull.com Colourfull Creations Web: http://www.colourfull.com