1 Feb
2017
1 Feb
'17
1:12 p.m.
I'd like to get another M7891, mine is only
1/2 populated.
Oh, so that must have been 64KW - 128KB. That will give you plenty of room
for
a decent-sized kernel, and user processes. Wonder why it won't boot, then?
Anyway, those are pretty rare. I have a couple of
spare M7847's; they're
only
32KB, but they'd help. You've got a couple of spare hex MUD slots now in
the
DD11-C, right? Speaking of which, where is the M7891 plugged in? It
couldn't
go in the DD11-B, or in the CPU backplane?
The half-populated M7891 is plugged into the DD11-CF, slot 3. I am unsure
if one can put an M7891 into a slot that has no NPG jumper installed, so I
always use slot 3 for this card in the DD11-CF. I would have to check, or
whether I can put this card into a DD11-B or a slot without the NPG
installed.
typing
anything kills the CPU and I have to restart the system..
Sorry, need exact details: after the '!' prompt, anything you type kills
the system on the first character? Or only "rlunix<CR>" does? How about
"foobar<CR>"? I'd have to look at the bootstrap source, but I think
typing a non-existing file name should take you back to the top-level
prompt.