At 09:52 PM 1/16/98 -0600, you wrote:
>Haddock says (now that I'm home) the Compass was early 1982, $6000-8000.
>Doesn't mention the others.
Forgive me, my ignorance, O Wise One, but what is this Haddock?
-John Higginbotham-
-limbo.netpath.net-
> OK I'll get an EE to help me out. Did you ever used that with a monitor? is
> the 60 Hz vs 50 Hz a problem?
>
>>When I went to the US recently, I built my own 110/220V converter. I
>>found a small (10VA) transformer that had dual 120V primaries and wired
>>these as an autotransformer. Boxed it up in small wooden box and Bob's
>>your uncle.
As Tony pointed out, 50/60 Hz shouldn't be a problem.
HOWEVER, it should be pointed out that the transformer must be capable
of carrying the power. I used a 10VA transformer to power the one or
two devices that had 240V only. To run monitors and things, you'd need
100VA or so. Transformers do exist for just this sort of purpose, upto
about 2kVA, but V. heavy!
(Rule of thumb for switchmode power supplies - Look at ower consumption
and assume 1VA = 0.6W)
Finally, a tranformer designed for 60Hz must be derated to a lower
VOLTAGE when used at 50Hz.
I hope that hasn't got you all too confused.
Philip.
> <These two threads just bumped together in my head. Has anybody got
> <an idea of how long data should last on wire? It can't have the same
>
> If it didn't rust forever or until a stronger field distrurbed it.
Assuming one got a wire recorder working, what is the print-through
situation like? I'd have thought not too good...
Philip.
Hey, just in case anyone's interested in HP calculators there is a red dot
model of the HP 35 for sale on Auction Web. For the ones of you that don't
know what they are, the red dot is the very first batch of HP calculators
that were ever produced by HP. They're very rare and you almost never see
one for sale. If any of you have one, I'LL BUY IT!
The URL is
"http://iguana.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=4389154" and no
I'm not the seller.
Joe
John Higginbotham <higginbo(a)netpath.net> wrote:
>Okay, so I have a C-64c, 1541 floppy, and monitor. Now how exactly would I
>go about downloading programs from the internet on my PC machine and
>porting them over to the Commodore? Will I need a special serial cable?
Browse some C-64 web pages, you'll find lots of info about this.
There are one or two emerged-standard parallel to DIN cables like
"X1541" that you can easily craft (given the right connectors -
I got lucky and found the right DIN in the junk box) that connect
your PC printer port directly to the 1541. Works like a charm.
I've also used a freeware utility on the Amiga that requires a
tweak of the drive speed motor on a 5 1/4 drive, and that works
OK, too. The 1541 is better, though, but you'll find a lot of
bad sectors and out-of-spec disks on the C-64.
- John
Jefferson Computer Museum <http://www.threedee.com/jcm>
Hi!
I think someone on this list is a System 80 expert, and I am hoping I can
find them. :) I just picked up a System 80 with expansion box and disk
drives, but I'm having some trouble. When I power it up I either get
gibberish on the screen (the usual stuff you get before the ready signal)
that doesn't go away, or, when I switch the box off,I just jump to BASIC.
This happens with or without a disk in the drive. I tried another System
80, and that one didn't seem to notice the expansion box at all - it
always went into BASIC, whether or not I had the box switched on.
None of the manuals seemed to have anything useful to say, but I suspect
that either I am being really stupid and failing to do something basic,
or something is broken somewhere. Any ideas?
Thanks heaps,
Adam.
Found these on an online auction:
TRS-80 Expansion Interface
http://www.haggle.com/cgi/getitem.cgi?id=201496013
RADIO SHACK TRS-80 EXPANSION INTERFACE-CATALOG NUMBER 26-1140-1 WITH
BUFFERED EI CABLE. CONDITION UNKNOWN. SOLD AS IS. BUYER PAYS UPS
SHIPPING,
AND PAYS BY MONEY ORDER, OR CHECK. CHECKS CLEAR BEFORE ITEM SHIPPED.
LOOKS
TO BE O.K. OUTSIDE WITH EXCEPTION OF ONE MISSING RUBBER TIP ON BOTTOM.
TRS-80 Mini Disk Drive
http://www.haggle.com/cgi/getitem.cgi?id=201496017
RADIO SHACK TRS-80 MINI DISK DRIVE-CATALOG NUMBER 26-1160. TAKES 5.25
FLOPPIES.
CONDITION UNKNOWN. SOLD AS IS. BUYER PAYS UPS SHIPPING, AND PAYS BY MONEY
ORDER, OR CHECK. CHECKS CLEAR BEFORE ITEM SHIPPED.
-John Higginbotham-
-limbo.netpath.net-
At 02:23 AM 1/16/98 -0600, you wrote:
>As for me, I'm into portable stuff... Anything, say $20 or less I'll
>definitely take it off your hands (or at least send you the $20). More than
>that, maybe ask first, unless it's really cool...
Same here, as long as it's portable, AND made by GRiD Systems.
-John Higginbotham-
-limbo.netpath.net-
At 06:03 AM 1/15/98 +0000, you wrote:
>Doea anyone have a spare 14 connector DIN cable? I need one for
>connecting a disk drive to my Thomson TO-8 computer. I believe the same
>cable is used to connect drives to the Atari ST series machines.
Check with one of the many Atari dealers out there... Best Electronics (San
Jose) has just released a new catalog that is also supposed to be an
excellent reference. Do a search on them and you should find it; several
other vendors (Like B&C) also sell the best catalog. You could also try
Computer Direct (I think) in Canada; they're a big dealer.
--------------------------------------------------------------------- O-
Uncle Roger "There is pleasure pure in being mad
roger(a)sinasohn.com that none but madmen know."
Roger Louis Sinasohn & Associates
San Francisco, California http://www.crl.com/~sinasohn/