For those of us that have QIC tape drives, this fellow has a bunch
of DC6525 tapes, most of them still in their shrink wrap.
Please contact him directly if interested.
-=-=- <snip> -=-=-
In article <3942FDF3.2D13(a)worldnet.att.net>, you say...
> Subject: Last chance for tapes
> From: Jack LaBrecque <JITB(a)worldnet.att.net>
> Reply-To: JITB(a)postoffice.worldnet.att.net
> Newsgroups: comp.sys.ncr, comp.sys.att, comp.periphs.scsi
>
> SONY QD6525N (Same as DC6525 from 3M) & 3M DDS-90 4mm. I have 50-100 of
> each. Most are brand new and still in wrappers. Make me an offer or
> they go to the dump.
>
> --
> Semper Fi
>
> Jack L
> JITB's Home Page:
> http://home.att.net/~jitb/
> JITB's USMC Page:
> http://home.att.net/~jitb/usmc/usmc.htm
> PFC Edward A. Peterson:
> http://home.att.net/~jitb/ed/pete.htm
>
>
--
-=-=-=-=-=-=-=-=-=-=-=-
Bruce Lane, Owner/Head Honcho,
Blue Feather Technologies (http://www.bluefeathertech.com)
kyrrin [a-t] bluefeathertech {d=o=t} com
"I'll get a life when someone demonstrates that it would be
superior to what I have now..." (Gym Z. Quirk)
>::I personally used my SE/30 to generate the required GS/OS disks from
>::Apple's Disk Copy images, so it does work.
>
>Okay, I'll give it a shot. Where can I get Disk Copy 4.2 from? Is this
>on the Apple FTP site?
ftp://ftp.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English-
North_American/Macintosh/Utilities/Disk_Copy/Disk_Copy_4.2.sea.hqx
Tom
------------------------------Applefritter------------------------------
Apple Prototypes, Clones, & Hacks - The obscure, unusual, & exceptional.
---------------------<http://www.applefritter.com/>---------------------
On June 10, R. D. Davis wrote:
> > I agree 100%. Though I must point out that it has nothing at all to
> > do with "older" or "newer" systems...it's primarily a "windows" or
> > "non-windows" issue.
>
> Hmmm, so this is an operating systems vs. a pseudo operating system
> issue. Thanks for the explanation.
Well, pretty much, yes.
-Dave McGuire
Does anybody know what the asking price for a GRiDCase 3 is?
I would love to ad this to my collection one of these days.
A bit of trivia: If anybody has seen the *long* version of the movie
"Aliens" , the computers that the marines use to control the motion
controlled smart guns are GRiDCases, I'm not sure which model. My guess is
that they are GRiDCase 3's.
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
-----Original Message-----
From: Dave McGuire <mcguire(a)neurotica.com>
> I agree 100%. Though I must point out that it has nothing at all to
>do with "older" or "newer" systems...it's primarily a "windows" or
>"non-windows" issue.
It's not that either. It's lazy or just plain lack of knowledge. outlook
express
and be told to use plain text (not rtf or html) and far as I know I'm doing
just
that from a NT4 system.
It annoying to me as a NT/OE user as RTF and html will alter termprorary
settings for fonts and all when I don't want that all due to someone who
does not know.
Allison
> > Is
> > the lack of security on the Internet possibly a well designed feature
> > disguised as a flaw?
>
> No, it is because much of it is Unix oriented. And Unix
> security is just not that good.
This isn't quite right, but does explain why Internet security
has not improved.
First and foremost, like most other ARPA projects (such as
Multics), the ARPAnet was meant to be a prototype for what
a network could be. One of the base-level assumptions was
that it would provide information sharing between a small
number of trusted and trusting sites.
However, from my own personal experience, I have never
succeeded in creating a prototype of a system to show to
management that management didn't say "a few more tweaks
and we're done". Although prototypes, both Multics and
ARPAnet were rushed into production because no one wanted
to take the time to stop and do it over again, better the
second time.
regards,
-doug quebbeman
>Delivered-To: cmcmanis(a)mcmanis.com
>From: Jack Olson <jacko(a)dilog.com>
>To: "'cmcmanis(a)mcmanis.com'" <cmcmanis(a)mcmanis.com>
>Subject: FW: DLI MOVE
>Date: Wed, 31 May 2000 09:27:09 -0700
>
>
>
>----------
>From: Jack Olsen
>Sent: Tuesday, May 30, 2000 11:35 AM
>To: Jack Olsen
>Subject: DLI MOVE
>
>
>WHAT'S HAPPENING
>AT DLI/DILOG?
>
>
>If you've tried to reach us in the last couple of months, you probably
>sense that there is something going on. Well you're right. The facility
>that we have been occupying in Irvine for the last eight years was sold to
>a church. So we had to relocate.
>
>We found the perfect site only 3 miles away in the city of Tustin and
>proceeded to make what was supposed to be a seamless move to our
>new digs the first week in March. Well, it wasn't so seamless. The first
>problem was that even though we are close to the old place, the new one
>was in a different area code, so we had to change telephone and fax
>numbers.
>
>OK, the telephone company will take care of referrals from the old to
>the new number. However, a good amount of our communications with
>our customers was via email. Now you have to understand our internal
>network and connections. We have a Novel system for file, print, email
>and Internet access. the Novel is connected to a Linux firewall Internet
>gateway. The Linux accesses the Internet every 15 minutes during the
>day to retrieve and send email for the company, then delivers it to our
>desk with Microsoft exchange. Nice working system.
>
>No problem. Just disconnect the parts at the old place, and reconnect at
>the new, plug into the wall and run. Right? - - Wrong. The Novel
>systems disk decided that it didn't like the climate at it's new home and
>proceeded to show its displeasure with a series of strange metal against
>metal sounds. No problem, we have a Libra library backup system and
>are fully backed up. Put on the new disk and restore the Novel system.
>Well, the Libra is one of the first ever made and has been chugging
>away everyday since we originally installed it. The DAT drive went on
>strike and had to be replaced. Once that was done we found out how
>important it is to remember where one packs the backup tape set.
>
>OK its now late March, the Novel server is up and running, but the
>building Ethernet wiring is not correct. Emails are being received
>sporadically. Bob gets the building wiring squared away and all is
>looking well when we receive a registered letter from Concentric, our
>Internet service provider telling us that they are discontinuing our dial-
>up account on Apr. 24.
>
>Time to enter the 21st century - we proceed to order an enhanced DSL
>service. They can't install until May 1. Call Concentric and see if they
>will stretch our disconnect date until then. Officially they cannot agree
>to do this. Unofficially it is done - Thank You Concentric. On May 1,
>our DSL is installed - but we are given the wrong network connection
>card to the Linux system. Got the correct card - DSL works - WOW -
>real time mail delivery.
>
>So now we're here in our new facility with a fully operational LAN and
>Internet.
>
>If you had some trouble reaching us, we apologize. We are here for you
>and are now fully accessible via phone - at our new number, fax - at our
>new number, or email and web page at the same number.
>
>Phone 714-508-1040, fax 714-508-1050,
>email info(a)dilog.com, www.dilog.com.
>
>So remember, same great products for Qbus and Unibus, -
>
>Same support, -
>
>New digs. -
>
>Give us a call.
>
>Sincerely,
>
>The DLI crew
>
Hi,
Thanks for the several helpful replies on this topic.
On Wed, 7 Jun 2000 Clint Wolff wrote:
> I would recommend against putting the board in an oven. This will
> result in the entire IC getting too hot, and possibly breaking.
> Modern plastic package absorb a small amount of water from the air.
> Heating the part may result in a small steam explosion. ICs are
> shipped from the factory in sealed bags with some desiccant inside.
> The label on the outside says to solder them down within a fairly
> short time after opening (couple days IIRC).
Ah, I have read about that.
IC manufacturers often specify a procedure to use when chips which may have
absorbed water are to be used. This involves baking at low temperature for a
while.
Assuming that (for the purposes of removing absorbed water) one plastic IC
package is the same as the next, at which temperature and for how long should
this baking be done?
The lowest setting on my oven is 70 degrees C. If that is low enough -- I
guess it should be as most ICs are specified for operation to 75 C or so -- I
may try putting the board in there for 12 or 24 hours, before turning the
temperature up to melt the solder.
-- Mark
Greetings,
Can certain list members who aren't sending standard ASCII text kindly
fix their e-mail software so that they stop sending messagse that
could possibly cause problems for some people using older systems?
Doesn't it seem a little strange that people who are interested in
computer preservation are sending iso-8859-1 character set messages
instead of normal ASCII to a mailing list where others are likely to
be using older systems to read their e-mail? Once ASCII goes away,
then we've all got problems that would make our older systems very
much incompatible with everything else and less useful. Is not plain
old ASCII one standard that we should value and do our best to keep
>from going out of use?
--
R. D. Davis
rdd(a)perqlogic.com
http://www.perqlogic.com/rdd
410-744-4900
-----Original Message-----
From: Chuck McManis <cmcmanis(a)mcmanis.com>
To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org>
Date: Friday, June 09, 2000 11:52 PM
Subject: Re: Wirin' up blinkenlights
>
>>For the blinkenlights, my least favorite choice is LEDs; does anyone
>>have a reason for a preference of Ne2 bulbs over incandescent bulbs or
>>vice versa?
NE2 bulbs need 75-90v db supply to run. If your to use them use NE2H
as they are brighter.
>Actually in my PDP-8/x the use of white LEDs seems like it will be a win.
Almost... White leds are biased toward blue white and incandesent lamps
were white biased toward red. Also with incandesant the color of the lens
cap was a factor. for examaple it could be red, amber, green even blue.
Allison