test-drb February 2016

test-drb@ccmp.vtda.org

203 participants
239 discussions

by COURYHOUSE＠aol.com

Rich and Jay this middle book in this url is the one we have here at museum the thin one Jay is sending you we have never owned. Is it uncommon or?? Yes by all means photo/scan the thing! https://www.flickr.com/photos/131070638 at N02/25092973706/in/photostream/ the 11/40 series books seem to be the ones we run into the most and I should round them all up from the various buildings and keep 2 sets and blow the others out for people to set next to their processors. Ed# _www.smecc.org_ (http://www.smecc.org) In a message dated 2/19/2016 4:50:26 P.M. US Mountain Standard Time, jwest at classiccmp.org writes: Richard wrote... -------------- All -- I've been searching for an online version of the LSI-11 Processor Handbook from 1975 (which I think covers the 11/03) but I can't seem to locate it anywhere. Does anyone have a link to it or, alternatively, a real copy that maybe I can scan? --------------- I probably have several hundred of those dec handbooks, organized by year. I just pulled the one you want... https://www.flickr.com/photos/131070638 at N02/25043539971/in/dateposted/ Richard - it's yours for "the cost of a beer if we ever meet". All I ask is that if one isn't online anywhere, you make reasonable efforts at some point to get it scanned and available to the public. Email me your shipping address off-list. J

10 years

got it. RE: Looking for PDP handbook

by jwest＠classiccmp.org

Richard wrote... -------------- All -- I've been searching for an online version of the LSI-11 Processor Handbook from 1975 (which I think covers the 11/03) but I can't seem to locate it anywhere. Does anyone have a link to it or, alternatively, a real copy that maybe I can scan? --------------- I probably have several hundred of those dec handbooks, organized by year. I just pulled the one you want... https://www.flickr.com/photos/131070638 at N02/25043539971/in/dateposted/ Richard - it's yours for "the cost of a beer if we ever meet". All I ask is that if one isn't online anywhere, you make reasonable efforts at some point to get it scanned and available to the public. Email me your shipping address off-list. J

10 years

Looking for a file (HP-UX 11.x)

by mountainlogic-systems＠comcast.net

I have some PA-RISC workstations in storage and an itanium server (that is a bit more accessible) that should both have 11i on them - it amy be a while before I can get to either of them - what would you need? > ------------------------------ > > Message: 28 > Date: Fri, 5 Feb 2016 18:23:31 -0500 > From: Bryan Everly <bryan at bceassociates.com> > To: cctalk at classiccmp.org > Subject: Looking for a file > Message-ID: <6592215753613049498 at unknownmsgid> > Content-Type: text/plain; charset=UTF-8 > > Does anyone out there have access to an HP-UX 11.x system? I am > looking for a ROM image file for the FX-e video card to help me write > an OpenBSD frame buffer driver for this platform. > > Thanks, > Bryan >

10 years

Looking for PDP handbook

by COURYHOUSE＠aol.com

Problem with scanning those handbooks - it is a destructive process mashing them in a flat bed. Maybe using one of the hold the book and photo the pages works well? or.... find one that is blown apart already... Ed# _www.smecc.org_ (http://www.smecc.org) In a message dated 2/19/2016 9:37:50 A.M. US Mountain Standard Time, rich.cini at verizon.net writes: All -- I've been searching for an online version of the LSI-11 Processor Handbook from 1975 (which I think covers the 11/03) but I can't seem to locate it anywhere. Does anyone have a link to it or, alternatively, a real copy that maybe I can scan? Thanks! Rich Sent from my iPhone=

10 years

Non-binding-breaking Book scanners (Was: Looking for PDP handbook

by COURYHOUSE＠aol.com

well... the trick is to have book partially open not cracked and to have 2 cameras for fast production copy and uniform size on the size as cameras are fixed clear material flattens pages sure if just a page or so a camera even hand held works... but if you are humping pages all day long..... you need this thing! Ed Sharpe archivist for smecc _www.smecc.org_ (http://www.smecc.org) In a message dated 2/19/2016 4:37:12 P.M. US Mountain Standard Time, tdk.knight at gmail.com writes: Why does someone just take a photo with their camera On Feb 19, 2016 5:09 PM, "Fred Cisin" <cisin at xenosoft.com> wrote: > On Fri, 19 Feb 2016, geneb wrote: > >> *sighs theatrically and shuffles off Fred's lawn* >> > > well, if you had brought beer, . . . > > > >

10 years

Non-binding-breaking Book scanners (Was: Looking for PDP handbook

by COURYHOUSE＠aol.com

...And when you look at the site you will see guy in dust mask. when scanning fungus ridden or moldy material a must although I prefer a class A respirator. We have an offsite storage we call the tombs and it smells like one... but it is for martial that is biohazzard challenged that we want to scan someday. too awesome to toss but too ucccky to have in the archive, museum area or library. If another copy shows up and/or someone scans a copy then the ucccky held copy is discarded. If not at least a copy is saved here and sometimes we suit up and scan some of it. Ed Sharpe archivist for SMECC In a message dated 2/19/2016 12:21:24 P.M. US Mountain Standard Time, cisin at xenosoft.com writes: >> http://www.diybookscanner.org/ :) > Ooh, that's pretty cool. Yes, but, . . . I've participated in building a few similar devices. Instead of the two sides MEETING in a V, there should be an open area right at the spine to accomodate the greater thickness of the spine itself. Having the two side panels able to slide up and down, with pegs, a few inches would accomodate that and permit a varying amount of spine clearance. Lighting. Ideally, lighting for copy work should be at a 45 degree (1/4PI) angle. That way specular reflection (glare) from glass cover (still needed occasionally!) or even just glossy paper, is not going towards the camera. If the trough faces north/south, then that can be done with light(s) north and south of the unit. Using two lights makes it much easier to get acceptably even illumination. Some people prefer various forms of diffuse light, or coaxial lighting ("ring" light). Having the camera at a fixed position relative to the work holder is great IFF you are doing consistent size. Different sizes could be dealt with through variable focal length ("zoom") lenses, but that is not always the ideal solution. I like to use FLAT-FIELD lenses, which are generally fixed focal length (sometimes called "primary lenses"). Enlarger lenses are an extremely cheap source for those. Being able to move the camera/work distance closer/farther requires a movable mount to change distance, but keep the camera centered relative to the work. North/south motion can be easily handled by moving the book along the trough, preferably with a fence, or simple bench-dog stops. The other motion generally requires the camera mount to be a pole at a 45 degree (1/4PI radians) angle relative to the work. Since the work is at a 45 degree angle from vertical, that means that the pole can be VERTICAL, with the camera mount aimed at a 45 degree angle. The post should be offset slightly from the north/south center, with the movable camera mounts holding the cameras at 45 degree angle (preferably with the focal node close to that central plane). Positioning of the book would require placing it so that it is centered north/south (calibration marks, as well as fence or bench-dogs, are very helpful!) and moving the camera up and down and focussing for distance. NOTE: use of other than 90 degree (1/2 PI radians) for the book holder would require further changes! -- Grumpy Ol' Fred cisin at xenosoft.com

10 years

Looking for PDP handbook

by rich.cini＠verizon.net

All -- I've been searching for an online version of the LSI-11 Processor Handbook from 1975 (which I think covers the 11/03) but I can't seem to locate it anywhere. Does anyone have a link to it or, alternatively, a real copy that maybe I can scan? Thanks! Rich Sent from my iPhone

10 years

BDV11 'mis-feature'

by jnc＠mercury.lcs.mit.edu

So I recently discovered that the LTC feature on the BDV11 bootstrap board has a minor issue: the latch that stores the 'LTC enabled' bit is _not_ cleared by INIT (unlike every other PDP-11 device I've ever heard of), but only by a direct store into the LTC CSR, _or_ power cycling (BDCOK, to be exact). This means that once you turn the LTC on using the BDV11, neither an INIT instruction, nor a 'Start' command to ODT, will disable it! Needless to say, it tends to scramble the booting process when an LTC interrupt shows up before the software is ready for one... I _was_ going to ECO the board, to connect BINIT to the clear input of the latch, but... I now think I know why DEC did this. There is no bus receiver on BINIT! (And there is, alas, no empty DIP space I could put one in.) I'm seriously tempted to connect the 'reset' circuitry on the BDV11 to BINIT, instead of BDCOK. That would mean that hitting the reset switch on the BDV11 wouldn't emulate a power cycle any more, but maybe I could live with that - I never use that switch anyway. And it would be _so_ nice to have 'Start' disable the LTC... Noel

10 years

RE: 928 gig classic computer manuals looking for seeders I am going on vacation Ill see y'all Tuesday

by barythrin＠gmail.com

Might be shooting the messenger in this case though? He didn't create the torrent just sharing that he found one and is trying to download it but having trouble due to lack of full copies being shared so he doesn't have it all yet. Unless you meant violation in tos of this mailing list? Just trying to protect him from potential misunderstanding ;-) <div>-------- Original message --------</div><div>From: Jay West <jwest at classiccmp.org> </div><div>Date:02/18/2016 1:24 PM (GMT-06:00) </div><div>To: "'General Discussion: On-Topic and Off-Topic Posts'" <cctalk at classiccmp.org> </div><div>Subject: RE: 928 gig classic computer manuals looking for seeders I am going on vacation Ill see y'all Tuesday </div><div> </div>The OP has blatantly violated what he expressly agreed to. Perhaps someone who is "bitter" has a good reason to be?

10 years

Kim 1

by barythrin＠gmail.com

Jose, What model is it and what are you asking about? Selling or seeking help to use it? It would also help folks if you mention where youre located. Members near you may speak up. - John? <div>-------- Original message --------</div><div>From: Jose Manuel <uribecosta123 at gmail.com> </div><div>Date:02/16/2016 10:05 PM (GMT-06:00) </div><div>To: cctalk at classiccmp.org </div><div>Subject: Kim 1 </div><div> </div>I have a Kim 1 board. Please contact. Thanks.

10 years

← Newer
1
...
9
10
11
12
13
14
15
...
24
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb February 2016