I would like to get a Tek 4404 computer going but lack any service
manuals. The system turns on but has no curser on the screen. Has
good power from the Power supply and heater is on in the CRT.
Has a row of LEDs on the mother board. Does anyone know how
to read these.
- Thanks, Jerry
On 7 May 2010, at 08:25, cctalk-request at classiccmp.org wrote:
>
> Message: 2
> Date: Thu, 06 May 2010 16:06:37 -0700
> From: Al Kossow <aek at bitsavers.org>
> Subject: Re: Servant .953
> To: cctalk at classiccmp.org
> Message-ID: <4BE34B7D.6060902 at bitsavers.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 5/6/10 2:23 PM, Fred Cisin wrote:
>>> Al Kossow wrote:
>>>> I am interviewing Andy Hertzfeld tomorrow, and had hoped to talk about
>>>> Servant, but I can't find a copy of it around anywhere tonight.
>
> A huge thank you to Nigel Williams who forwarded a working copy of .951 five
> minutes before Bill and Andy arrived. We spent an hour talking about MacPaint
> and Quickdraw (Apple has finally given CHM approval to make the sources available)
> then another hour on Alice, Dali Clock, Servant, Hypercard, and Magic Cap.
Could you please clarify, the QuickDraw source is available for what purpose? Could developers modify it any include it in heir commercial 64 bit Intel applications for instance?
Is the source Pascal, Assembler, C or something else?
Roger Holmes,
Director of Microspot who has a Carbon application which compiles with over 10,000 warnings about deprecated QuickDraw calls.
When Multics was officially released as free software a couple of
years ago, there was a flurry of activity aimed at getting some sort
of emulator up and running to run it. Did anything ever come of that
or did folks just lose interest (or find out that the needed
GE/Honeywell hardware was too poorly-documented to write an emulator
of)
Mike
I have a monitor for a Stardent workstation. It's a re-badge Sony, model
number 130-0001-01.
Free for pickup, or 1.2 * cost of shipping to recoup time and trouble if
you want it shipped.
Please respond soon if you are interested as it will be going off for
scrap in a week if there are no takers.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
http://classiccmp.org/pipermail/cctalk/2010-January/282022.html
It always suprised me that hre BBC micro used the 6502 rather than the
6809. By the time the Beeb was designed, Acorn had made a 6809 processor
board for their System machines, so they must have had experience with
the chip. THe Beeb is nice, but a Beeb with a 6809 processor would have
been something else :-)
-tony
Hi! When I designed the N8VEM 6809 host processor it is loosely based on an
article I read for the BBC computer called "Dragon in the tube". I am not
very familiar with the UK microcomputers but apparently 6809 "coprocessors"
were fairly common peripherals on their Z80 and 6502 designs. I used a
similar concept for the N8VEM to allow its Z80 SBC to access the 6809 as a
"host processor" peripheral on the ECB.
One of the builders was able to get CUBIX running on the N8VEM 6809 host
processor using the Z80 as its "IO processor". However, I can see how the
implementation can get confusing because it is either a Z80 based system
with a 6809 coprocessor or a 6809 based system with a Z80 IO processor. In
reality it doesn't really matter but it's a matter of perspective.
The N8VEM 6809 CUBIX implementation allows the use of ECB peripherals like
IDE, video, floppy, serial, parallel, etc but it requires the Z80 to serve
all the IO based on 6809 commands. I added the 6809 IO mezzanine board
(power, ACIA, PTM, 2 VIAs, expansion bus) to give builders the option of
using the 6809 host processor as a stand alone computer or to add separate
IO to the N8VEM system when connected to the bus. The idea being to let the
6809 host processor interact with the outside world using its own IO and
only involve the Z80 when absolutely necessary.
The hardware seems to work OK but we'll see where the software goes. I
think with CUBIX the 6809 N8VEM system becomes a lot more practical. The IO
mezzanine fits on top of the 6809 host processor. You can see some photos
here. These are out of date but give a good idea. Recently I fitted an
improved serial cable and the nylon standoff hardware. Also the PTM seems
to be working and that's good.
http://n8vem-sbc.pbworks.com/browse/#view=ViewFolder¶m=m6809
I have many 6809 host processor and IO mezzanine PCBs so if anyone is
interested please let me know. This would be a great opportunity for anyone
who would like to do some 6809 hardware and software hacking.
I think the N8VEM 6809 host processor is the only system I am aware of other
than Dave's homebrew that is running CUBIX. There maybe some other homebrew
systems out there too I can't find them after some searching.
Thanks and have nice day!
Andrew Lynch
>
>Subject: VT-180 (Robin) EPROM images?
> From: "Robert Armstrong" <bob at jfcl.com>
> Date: Sat, 10 Mar 2007 20:23:04 -0800
> To: <cctech at classiccmp.org>
>
> Does anybody have images of the v2.1 Z-80 firmware for the VT-180 (aka
>Robin) ? At least, I think 2.1 was the last version ever released. They
>should be DEC part numbers 23-017E3-00 and 23-021E3-00.
>
>Thanks,
>Bob Armstrong
I have enough of them laying around I could supply the actual roms. I've
never imaged them as It's easier to replace the code outright.
Curious why are you looking for them?
Allison
Like the Sanyo just yesterday, I have a Compaq SLT/286 portable computer
taking up space. Very nice condition, with power unit, dock, and bag. Any
interest CHEAP? I am located in New York, zip 10512.
Unlike the Sanyo, if there is no interest, I suppose I will just chop this
up.
I am desperately trying to clear out a bedroom to work on it - the bedroom
that ends up being the junk overflow containment chamber. It would
actually be nice to sleep in it sometime.
William Donzelli
aw288 at osfn.org
Does anyone have the O/S, Applications, and Diagnostice disks for this
ancient IEEE 488 bus controller (Fluke 1720A)? It used a TI 9900
processor if I remember correctly. The operating system was called FDOS-
a custom effort too I think, distributed on three 5 1/4" floppies. This
is no longer available from anywhere or anyone, including Fluke.
Thanks for any help and/or leads.
Geoff
I have been fortunate to acquire a Kaypro system that appears to be in
great condition and looks to work.
It looks exactly like this:
http://www.computermuseum.li/Testpage/Kaypro-I-Micro.htm
Thus, it says Kaypro 1 on the artwork
Still, the sticker on the rear says Kaypro 2, so I'm confused.
In any event, I have no system disks for it (There is a slight
possibility they are part of the stash with which the Kaypro was
bundled, but it's 100 sq ft of stuff). Thus, I'm wondering if there is
a kind soul who might be able to ship me a set of disks. (I'll pay
shipping, of course).
I also am the proud owner of 2 Obsorne machines (one works, the other
seems to have drive issues. They are the redesigned units, but (as I
suspected) the systems disks won't work on the Kaypro.
Jim
--
Jim Brain, Brain Innovations (X)
brain at jbrain.com
Dabbling in WWW, Embedded Systems, Old CBM computers, and Good Times!
Home: http://www.jbrain.com
Tom's Hardware - a popular site for PC hardware tweakers and
overclockers - has done an ambitious article on the development of the
mainframe:
http://www.tomshardware.com/picturestory/508-mainframe-computer-history.html
It's a little American-centric but it's not at all bad.
--
Liam Proven ? Profile: http://www.linkedin.com/in/liamproven
Email: lproven at cix.co.uk ? GMail/GoogleTalk/Orkut: lproven at gmail.com
Tel: +44 20-8685-0498 ? Cell: +44 7939-087884 ? Fax: + 44 870-9151419
AOL/AIM/iChat/Yahoo/Skype: liamproven ? LiveJournal/Twitter: lproven
MSN: lproven at hotmail.com ? ICQ: 73187508
