test-drb December 2009

test-drb@ccmp.vtda.org

184 participants
226 discussions

IBM 5151 green phosphor monitors for sale

by sellam＠vintagetech.com

I have a limited number of IBM 5151 monitors for sale. This is the classic green screen monitor that shipped with the basic IBM PC 5150. Condition is adequate. They are dirty but I will clean them up before shipping out. Will test for basic functionality. No burn-in or other problems, but no warranty either. The price is $30 each plus shipping. First come, first served. Please contact me directly via e-mail. Thanks! -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

12 years

Gooey TU58 rollers

by ajp166＠bellatlantic.net

> >Subject: Re: Gooey TU58 rollers > From: "Ethan Dicks" <ethan.dicks at gmail.com> > Date: Tue, 28 Aug 2007 17:39:20 -0500 > To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > >On 8/27/07, B M <iamvirtual at gmail.com> wrote: >> I am trying to get a Vax-11/750 machine up and running. It looks like the TU58 drive >> is suffering from the 'gooey roller syndrome'. > >Unsurprising. > >> I see that people have successfully used 1/2 inch (ID) Tygon tubing to replace the >> goo. Is there any specific type of Tygon tubing (eg. R3603, R2000, etc.) that is used? > >I don't know the particular variety I used in mine - I just went to >the Lowe's down the street and bought a foot of 1/2" ID tubing - >whatever they had on the shelf. I was unaware of a large amount of >varieties of tubing, so I just used what they had in stock, and it >worked perfectly. > >-ethan I started that many years ago like 1995ish. I spec'd Tygon (brnad name) as that was available to me. Most any generic Vinyl tubing works so long as it fits tight and has enough wall thickness. After about 10 years it tends to get hard, the fix is obvious. Allison

12 years, 1 month

Texas Instruments 960B

by aek＠bitsavers.org

> does anybody have bits for the TI 960B (not 960A) minicomputer, e.g. > software, schematics etc. ? I have some additional material on the 960 that isn't up yet on bitsavers. The 960 and 980 share some peripheral interfaces. Did you end up with the 990 system as well?

12 years, 2 months

NEC Spinwriter 5525 available

by iamvirtual＠gmail.com

[I hope this is on-topic; I believe the machine is at least 20 years old] I have a NEC Spinwriter 5525 printer that is available for the cost of shipping (free if you pick it up). The printer is a wide carriage and appears to have a RS232 serial interface. I do not know if the printer works or not. The machine is located in Langdon Alberta Canada (postal code is T0J 1X1) which is approximately 10 minutes east of Calgary. The machine is rather heavy. I estimate 50 pounds or more. If there is no interest, the machine is headed to the e-waste recycling. I can send pictures upon request. Contact by e mail: i a m v i rt ihatespam u al @ @ @ g ma il . c om <-- remove spaces and ihatespam Thanks! --barry

12 years, 5 months

Has anyone ever heard of theProtec Microsystems PRO-83?

by rdcoll＠hotmail.com

Hello everyone, I just joined this mailing list today on the advice of more than one vintage computing contact. I was wondering if anyone could tell me anything about the Protec Microsystems PRO-83 Z80 Single-Board Computer. I have conducted an exhaustive search of the Internet and found only two sites (one from a surplus store and a picture of it from a museum). I would appreciate any information available, especially information regarding the power supply and peripheral devices. Thank you very much. Rob _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx

12 years, 6 months

HP 3000 micro gx booting MPE/V, Help >>>>

by g-wright＠att.net

Any Hp Mpe folks left out there I have non working 3000/37s with possibly good drives and a 3000 micro GX that works but has a bad drive. I have tried to boot the micro GX from the 3000-37 drives and get this far. ---------------------------------------- Cold Boot > HP 32033G.B2.02 Performing a Coldstart Following Volumes not found MH7957U1 List Volume tables ? ---------------------------- Seems to freeze after that. It does this on 2 different drives. Is this even possible to do ??? Does anyone have a OS tape for one of these ??? and which manuals cover the boot menu and/or startup. I would like to get both going but the 3000-37's have dead mother boards. Stan Sieler, are you still around. Seems like every search I do comes up with your name and advice. Thanks, Jerry Jerry Wright g-wright at att.net

12 years, 7 months

HPIB cables

by donm＠cts.com

I have a couple of HPIB cables available at $15 the pair, shipped. They are: 1 HP10833A ~42" 1 HP92220R ~12" The 92220R has a right-angle connector at one end and the usual straight connector at the other. (I wonder if the 'R' indicates a right hand connector?) First come, first served. - don

12 years, 7 months

Century Data T2000 exerciser

by nasim786＠earthlink.net

Hi, This is a belated response to a post you made here: http://www.classiccmp.org/pipermail/cctech/2003-February/010641.html I happened upon it while doing a 'for fun' search on the net for anything doing with good ol' Century Data, my employer when I was young. Couldn't resist responding to the post, even if it was half a year late! The exerciser that you have is/was for the Trident series of hard disk drives (predecessor to the Marksman). I was the main (in fact, pretty much the ONLY) technician at Century Data/Calcomp, for these exercisers back from the late 1970's to the mid 1980's, when they were phased out. I retired in 1985. Have fun! (BTW, where'd you find one of these dinosaurs??) Take care, Nasim

12 years, 7 months

Tiny BASIC Extended available

by eds_2＠yahoo.com

Every so often, a discussion of Tiny BASIC appears around here. I was curious about one of the very first versions of Tiny BASIC, the 8080 implementation done by Whipple and Arnold, as documented in the Vol. 1 No. 1 (Jan 1976) issue of Dr. Dobb's Journal (of Tiny BASIC Calisthenics and Orthodontia) This issue contains an octal listing of a Tiny BASIC interpreter for the 8080, and I couldn't find this version available for download anywhere. So... I typed it in, and it works! I documented my work, which is available at http://oss.readytalk.com/tb/tinybasic.tar.gz (Note - this location is temporary - I need a home for this if anyone is interested) Included are the text file for the octal listing, a binary which can be loaded into memory, an attempt to extract the IL from the binary, and some instructions on bringing up Tiny BASIC. I was able to run some simple programs with a Z80 simulator that I've been running, and it appears to work correctly. I found the PDF of the listing in the ACM digital library: http://doi.acm.org/10.1145/987491.987494 Typing in octal listings is error-prone enough, and typing them in from bad PDF scans of bad photocopies is even trickier. I have corrected many errors, but I'm sure there are more. If any kind soul would be willing to proofread / correct the listing, it would be **GREATLY** appreciated. I hope this is of interest to people. I'm very interested in other versions of Tiny BASIC out there, if someone has ever typed this listing before, etc. I'm familiar with Tom Pittman's work, but other resources would be greatly appreciated. -Eric ____________________________________________________________________________________ Don't pick lemons. See all the new 2007 cars at Yahoo! Autos. http://autos.yahoo.com/new_cars.html

12 years, 7 months

Chips that changed the world

by rcini＠optonline.net

All: For those interested, IEEE has an article about the 25 chips that changed the world. The NE555 is #1 and the 6502 is #2. http://spectrum.ieee.org/may09/8747 Rich -- Rich Cini Collector of Classic Computers Build Master and lead engineer, Altair32 Emulator http://www.altair32.com http://www.classiccmp.org/cini

12 years, 9 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb December 2009