test-drb January 2008

test-drb@ccmp.vtda.org

221 participants
430 discussions

by vcf＠siconic.com

I have a monitor for a Stardent workstation. It's a re-badge Sony, model number 130-0001-01. Free for pickup, or 1.2 * cost of shipping to recoup time and trouble if you want it shipped. Please respond soon if you are interested as it will be going off for scrap in a week if there are no takers. -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

10 years, 3 months

VT-180 (Robin) EPROM images?

by ajp166＠bellatlantic.net

> >Subject: VT-180 (Robin) EPROM images? > From: "Robert Armstrong" <bob at jfcl.com> > Date: Sat, 10 Mar 2007 20:23:04 -0800 > To: <cctech at classiccmp.org> > > Does anybody have images of the v2.1 Z-80 firmware for the VT-180 (aka >Robin) ? At least, I think 2.1 was the last version ever released. They >should be DEC part numbers 23-017E3-00 and 23-021E3-00. > >Thanks, >Bob Armstrong I have enough of them laying around I could supply the actual roms. I've never imaged them as It's easier to replace the code outright. Curious why are you looking for them? Allison

10 years, 10 months

Compaq SLT/286

by aw288＠osfn.org

Like the Sanyo just yesterday, I have a Compaq SLT/286 portable computer taking up space. Very nice condition, with power unit, dock, and bag. Any interest CHEAP? I am located in New York, zip 10512. Unlike the Sanyo, if there is no interest, I suppose I will just chop this up. I am desperately trying to clear out a bedroom to work on it - the bedroom that ends up being the junk overflow containment chamber. It would actually be nice to sleep in it sometime. William Donzelli aw288 at osfn.org

11 years, 2 months

FDOS for Fluke 1720A

by geoffb＠vigilan.com

Does anyone have the O/S, Applications, and Diagnostice disks for this ancient IEEE 488 bus controller (Fluke 1720A)? It used a TI 9900 processor if I remember correctly. The operating system was called FDOS- a custom effort too I think, distributed on three 5 1/4" floppies. This is no longer available from anywhere or anyone, including Fluke. Thanks for any help and/or leads. Geoff

11 years, 5 months

Wait! There's more including MS-DOS 1.25!!!! was Sanyo MBC-550 (Yuck!) software available

by rigdonj＠intellistar.net

I'm still digging. I found more 550 stuff. I think this is everything that came with the 550. Here's a chance for you 550 owner's to get the whole set at one shot! Original DS-DOS box and invoice. Original Sanyo Easywriter ver 1.3 disk Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4 are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1 Original Sanyo disk box with all three original disk of set A, WordStar and CalcStar and a backup copy of DS-DOS. Two card board dummy disks used to protect the floppy drives duing shipment. Joe > >A few weeks ago we were talking about the Sanyo 550 series and someone mentioned one of the alternates operating systems that supported 80 track drives in the 550. I said that was DS-DOS by Michtron. > > Today I found an old Sanyo disk package with four disks for the 550. One of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the other is a disk of misc utilities. The first three are original disks. In additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that came with the 550. If anyone wants them, trade me something I can use and they're all your's. > > Joe

11 years, 10 months

Gooey TU58 rollers

by ajp166＠bellatlantic.net

> >Subject: Re: Gooey TU58 rollers > From: "Ethan Dicks" <ethan.dicks at gmail.com> > Date: Tue, 28 Aug 2007 17:39:20 -0500 > To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > >On 8/27/07, B M <iamvirtual at gmail.com> wrote: >> I am trying to get a Vax-11/750 machine up and running. It looks like the TU58 drive >> is suffering from the 'gooey roller syndrome'. > >Unsurprising. > >> I see that people have successfully used 1/2 inch (ID) Tygon tubing to replace the >> goo. Is there any specific type of Tygon tubing (eg. R3603, R2000, etc.) that is used? > >I don't know the particular variety I used in mine - I just went to >the Lowe's down the street and bought a foot of 1/2" ID tubing - >whatever they had on the shelf. I was unaware of a large amount of >varieties of tubing, so I just used what they had in stock, and it >worked perfectly. > >-ethan I started that many years ago like 1995ish. I spec'd Tygon (brnad name) as that was available to me. Most any generic Vinyl tubing works so long as it fits tight and has enough wall thickness. After about 10 years it tends to get hard, the fix is obvious. Allison

11 years, 11 months

Texas Instruments 960B

by aek＠bitsavers.org

> does anybody have bits for the TI 960B (not 960A) minicomputer, e.g. > software, schematics etc. ? I have some additional material on the 960 that isn't up yet on bitsavers. The 960 and 980 share some peripheral interfaces. Did you end up with the 990 system as well?

12 years, 1 month

NEC Spinwriter 5525 available

by iamvirtual＠gmail.com

[I hope this is on-topic; I believe the machine is at least 20 years old] I have a NEC Spinwriter 5525 printer that is available for the cost of shipping (free if you pick it up). The printer is a wide carriage and appears to have a RS232 serial interface. I do not know if the printer works or not. The machine is located in Langdon Alberta Canada (postal code is T0J 1X1) which is approximately 10 minutes east of Calgary. The machine is rather heavy. I estimate 50 pounds or more. If there is no interest, the machine is headed to the e-waste recycling. I can send pictures upon request. Contact by e mail: i a m v i rt ihatespam u al @ @ @ g ma il . c om <-- remove spaces and ihatespam Thanks! --barry

12 years, 4 months

Has anyone ever heard of theProtec Microsystems PRO-83?

by rdcoll＠hotmail.com

Hello everyone, I just joined this mailing list today on the advice of more than one vintage computing contact. I was wondering if anyone could tell me anything about the Protec Microsystems PRO-83 Z80 Single-Board Computer. I have conducted an exhaustive search of the Internet and found only two sites (one from a surplus store and a picture of it from a museum). I would appreciate any information available, especially information regarding the power supply and peripheral devices. Thank you very much. Rob _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx

12 years, 5 months

HPIB cables

by donm＠cts.com

I have a couple of HPIB cables available at $15 the pair, shipped. They are: 1 HP10833A ~42" 1 HP92220R ~12" The 92220R has a right-angle connector at one end and the usual straight connector at the other. (I wonder if the 'R' indicates a right hand connector?) First come, first served. - don

12 years, 5 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb January 2008