test-drb March 2007

test-drb@ccmp.vtda.org

239 participants
488 discussions

by vcf＠siconic.com

I have a monitor for a Stardent workstation. It's a re-badge Sony, model number 130-0001-01. Free for pickup, or 1.2 * cost of shipping to recoup time and trouble if you want it shipped. Please respond soon if you are interested as it will be going off for scrap in a week if there are no takers. -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

10 years, 4 months

VT-180 (Robin) EPROM images?

by ajp166＠bellatlantic.net

> >Subject: VT-180 (Robin) EPROM images? > From: "Robert Armstrong" <bob at jfcl.com> > Date: Sat, 10 Mar 2007 20:23:04 -0800 > To: <cctech at classiccmp.org> > > Does anybody have images of the v2.1 Z-80 firmware for the VT-180 (aka >Robin) ? At least, I think 2.1 was the last version ever released. They >should be DEC part numbers 23-017E3-00 and 23-021E3-00. > >Thanks, >Bob Armstrong I have enough of them laying around I could supply the actual roms. I've never imaged them as It's easier to replace the code outright. Curious why are you looking for them? Allison

10 years, 11 months

Compaq SLT/286

by aw288＠osfn.org

Like the Sanyo just yesterday, I have a Compaq SLT/286 portable computer taking up space. Very nice condition, with power unit, dock, and bag. Any interest CHEAP? I am located in New York, zip 10512. Unlike the Sanyo, if there is no interest, I suppose I will just chop this up. I am desperately trying to clear out a bedroom to work on it - the bedroom that ends up being the junk overflow containment chamber. It would actually be nice to sleep in it sometime. William Donzelli aw288 at osfn.org

11 years, 3 months

FDOS for Fluke 1720A

by geoffb＠vigilan.com

Does anyone have the O/S, Applications, and Diagnostice disks for this ancient IEEE 488 bus controller (Fluke 1720A)? It used a TI 9900 processor if I remember correctly. The operating system was called FDOS- a custom effort too I think, distributed on three 5 1/4" floppies. This is no longer available from anywhere or anyone, including Fluke. Thanks for any help and/or leads. Geoff

11 years, 6 months

Wait! There's more including MS-DOS 1.25!!!! was Sanyo MBC-550 (Yuck!) software available

by rigdonj＠intellistar.net

I'm still digging. I found more 550 stuff. I think this is everything that came with the 550. Here's a chance for you 550 owner's to get the whole set at one shot! Original DS-DOS box and invoice. Original Sanyo Easywriter ver 1.3 disk Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4 are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1 Original Sanyo disk box with all three original disk of set A, WordStar and CalcStar and a backup copy of DS-DOS. Two card board dummy disks used to protect the floppy drives duing shipment. Joe > >A few weeks ago we were talking about the Sanyo 550 series and someone mentioned one of the alternates operating systems that supported 80 track drives in the 550. I said that was DS-DOS by Michtron. > > Today I found an old Sanyo disk package with four disks for the 550. One of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the other is a disk of misc utilities. The first three are original disks. In additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that came with the 550. If anyone wants them, trade me something I can use and they're all your's. > > Joe

11 years, 11 months

Texas Instruments 960B

by aek＠bitsavers.org

> does anybody have bits for the TI 960B (not 960A) minicomputer, e.g. > software, schematics etc. ? I have some additional material on the 960 that isn't up yet on bitsavers. The 960 and 980 share some peripheral interfaces. Did you end up with the 990 system as well?

12 years, 2 months

Has anyone ever heard of theProtec Microsystems PRO-83?

by rdcoll＠hotmail.com

Hello everyone, I just joined this mailing list today on the advice of more than one vintage computing contact. I was wondering if anyone could tell me anything about the Protec Microsystems PRO-83 Z80 Single-Board Computer. I have conducted an exhaustive search of the Internet and found only two sites (one from a surplus store and a picture of it from a museum). I would appreciate any information available, especially information regarding the power supply and peripheral devices. Thank you very much. Rob _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx

12 years, 6 months

HPIB cables

by donm＠cts.com

I have a couple of HPIB cables available at $15 the pair, shipped. They are: 1 HP10833A ~42" 1 HP92220R ~12" The 92220R has a right-angle connector at one end and the usual straight connector at the other. (I wonder if the 'R' indicates a right hand connector?) First come, first served. - don

12 years, 7 months

Century Data T2000 exerciser

by nasim786＠earthlink.net

Hi, This is a belated response to a post you made here: http://www.classiccmp.org/pipermail/cctech/2003-February/010641.html I happened upon it while doing a 'for fun' search on the net for anything doing with good ol' Century Data, my employer when I was young. Couldn't resist responding to the post, even if it was half a year late! The exerciser that you have is/was for the Trident series of hard disk drives (predecessor to the Marksman). I was the main (in fact, pretty much the ONLY) technician at Century Data/Calcomp, for these exercisers back from the late 1970's to the mid 1980's, when they were phased out. I retired in 1985. Have fun! (BTW, where'd you find one of these dinosaurs??) Take care, Nasim

12 years, 7 months

Tiny BASIC Extended available

by eds_2＠yahoo.com

Every so often, a discussion of Tiny BASIC appears around here. I was curious about one of the very first versions of Tiny BASIC, the 8080 implementation done by Whipple and Arnold, as documented in the Vol. 1 No. 1 (Jan 1976) issue of Dr. Dobb's Journal (of Tiny BASIC Calisthenics and Orthodontia) This issue contains an octal listing of a Tiny BASIC interpreter for the 8080, and I couldn't find this version available for download anywhere. So... I typed it in, and it works! I documented my work, which is available at http://oss.readytalk.com/tb/tinybasic.tar.gz (Note - this location is temporary - I need a home for this if anyone is interested) Included are the text file for the octal listing, a binary which can be loaded into memory, an attempt to extract the IL from the binary, and some instructions on bringing up Tiny BASIC. I was able to run some simple programs with a Z80 simulator that I've been running, and it appears to work correctly. I found the PDF of the listing in the ACM digital library: http://doi.acm.org/10.1145/987491.987494 Typing in octal listings is error-prone enough, and typing them in from bad PDF scans of bad photocopies is even trickier. I have corrected many errors, but I'm sure there are more. If any kind soul would be willing to proofread / correct the listing, it would be **GREATLY** appreciated. I hope this is of interest to people. I'm very interested in other versions of Tiny BASIC out there, if someone has ever typed this listing before, etc. I'm familiar with Tom Pittman's work, but other resources would be greatly appreciated. -Eric ____________________________________________________________________________________ Don't pick lemons. See all the new 2007 cars at Yahoo! Autos. http://autos.yahoo.com/new_cars.html

12 years, 7 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb March 2007