test-drb September 2005

test-drb@ccmp.vtda.org

212 participants
437 discussions

by aek＠bitsavers.org

found the binder.. The HP 2600A is a Datapoint 3300. There was even a brochure from Datapoint in the binder along with an HP brochure. FWIW, the HP 2615A is a Beehive Mini-Bee (also in the same binder)

19 years, 3 months

Datapoint 3300

by aek＠bitsavers.org

The service manual for the 3300 in on bitsavers under datapoint A line drawing of the case is on page 3-41 I have a brochure and the service manual for the HP 2600. From memory, it looks the same. Will dig it out and scan it.

19 years, 3 months

Datapoint 3300 and DEC VT06 terminals

by swtpc6800＠comcast.net

I am doing a bit of research on Computer Terminal Corporation terminals and I am looking for a picture of the Datapoint 3300. I understand that CTC OEMed the terminal to many companies. I have found references to the VT06 being the same as the Datapoint 3300. I also found a HP document that list the HP 2600A as be compatible with the 3300. Can anyone clarify this. The designer of the SWTPC CT-1024 Terminal, Ed Colle, had worked at Datapoint on video terminals. My area of interest is SWTPC 6800 computers and they have an interesting connection with Datapoint. Both were located in San Antonio, Texas. When SWTPC selected a computer to run their business they selected a Datapoint 2200. They liked the way the machine booted up and did not require a front panel with switches. The SWTPC 6800 did not have front panel switches and lights. It booted up with a monitor ROM. I have some interesting notes from Gary Kay, the designer of the SWTPC 6800 here. (And a good photo of the Datapoint 2200) http://www.swtpc.com/mholley/History/SWTPC_History.htm Michael Holley

19 years, 3 months

CP/M archive to image 8" CP/M floppies

by shoppa_classiccmp＠trailing-edge.com

I used to be more on top of CP/M archives on the net, but I haven't kept up in the past few years. I have images of several hundred 8" CP/M software, including original distribution disks and a lot of stuff pirated in the 70's/early 80's. I also have maybe 100 more 8" floppies with CP/M related stuff that ought to be archived. A decade or two ago I would image these other floppies myself but I'm no longer with the free time to do these activities. The floppies I have already imaged are available on the net at ftp://ftp.trailing-edge.com/pub/cpm/ Most of the images reside in cpm.zip, in a format where each physical sector is mapped to the image, resulting in a 256256 byte image. For the floppies that are in CP/M file format, there are "*.cpmdir" files that list the individual files on the disk. There are also "*.index" files that say what was on the floppy label. Are there any takers for the remaining 100+ CP/M floppies? Tim.

19 years, 3 months

Computer Machinery Corporation?

by ajp166＠bellatlantic.net

> >Subject: Re: Computer Machinery Corporation? > From: Vintage Computer Festival <vcf at siconic.com> > Date: Fri, 16 Sep 2005 21:37:01 -0700 (PDT) > To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > >On Fri, 16 Sep 2005, Tom Jennings wrote: > >> Up at Apex today, this is what I saw, part 1: >> >> http://wps.com/temp/CMC1.jpg >> http://wps.com/temp/CMC2.jpg >> http://wps.com/temp/CMC3.jpg >> >> It's a 12-bit machine, but big odd non-DEC-looking boards. It's >> 7400 TTL, with 1974 and 1973 dated-coded chips. > >Hmm, front panel is definitely PDP-8-ish-looking. Worth saving regardless >of condition, if you think you might be able to restore it (certainly >possible with the right amount of time and inclination). > >-- > >Sellam Ismail Vintage Computer Festival It's definately a PDP-8 clone and actually pretty decent. Actually saw one in use back around '81. It would be fun getting one of those going again, wrong coast though. If memory serves they (DCC) also did a 16bit machine cloned after a different platform. Allison

19 years, 3 months

looking for a book on monitor theory

by Watzman＠neo.rr.com

Re: > Purpose: the investigate the possibility of modifying > a recent multisync to sync down to TV frequencies. Eeek! ... Personally I think it would be easier to find an old TV-rate monitor and repair it, even if you have to wind replacement transformers yourself. But anyway..." This may not be all that hard. In fact, the early NEC "multisync" monitors DID this, as they came stock from the factory. CGA, MCGA, EGA and VGA. They even came with 9-pin to 15-pin adapters to deal with the two different connectors in use. I'm not sure that current monitors still do it in their "stock" configuration, BUT I WOULD NOT RULE OUT THE POSSIBILITY THAT SOME MIGHT.

19 years, 3 months

PDP-11

by RMeenaks＠OLF.COM

Does anyone have any PDP8 equipment / machine they are willing to dispose (or sell) in the NY area??? A friend of mine is asking... Thanks, Ram > -----Original Message----- > From: Gordon JC Pearce [mailto:gordon at gjcp.net] > Sent: Friday, September 16, 2005 7:12 AM > To: On-Topic and Off-Topic Posts > Subject: Re: PDP-11 > > > Joe Maroney wrote: > > Greetings, > > > > I have two working PDP-11's(23+) that came out of a bowling > alley for > > sale. Here is a partial list of items from the systems: > > > > Where are they, and how much? > > Gordon. >

19 years, 3 months

Computer Machinery Corporation?

by leeedavison＠yahoo.co.uk

>> http://wps.com/temp/CMC2.jpg > File Missing... It's here .. http://wps.com/temp/CMC-2.jpg Lee. . ___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com

19 years, 3 months

Emulex SC02/C SMD Qbus controller

by hachti＠hachti.de

Hello folks, who has experience with the Emulex SC02/C controller? I tried the hardware format sequence - but it didn't work as expected. Perhaps my controller has a problem. Perhaps there is something set up wrong. And hardware formatting my disk packs is the way I hope to get these packs usable. In my documentation to the controller there's mentioned a diagnostic software - which I don't have. Does anybody have that? Best wishes, Philipp :-)

19 years, 3 months

Computer Machinery Corporation?

by ajp166＠bellatlantic.net

> >Subject: Computer Machinery Corporation? > From: Tom Jennings <tomj at wps.com> > Date: Fri, 16 Sep 2005 15:14:14 -0700 (PDT) > To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org> > >Up at Apex today, this is what I saw, part 1: > >http://wps.com/temp/CMC1.jpg >http://wps.com/temp/CMC2.jpg >http://wps.com/temp/CMC3.jpg > >It's a 12-bit machine, but big odd non-DEC-looking boards. It's >7400 TTL, with 1974 and 1973 dated-coded chips. > >Both machines are ruined. Sacked in mud, probably for a decade. >Little rust though, looks like damp, then blown-in dust or silt. >Boards are possibly recoverable. > >No memory or any accessories within 10 feet, I think they were >buried under junk and just unearthed (Don is going through the >yard). > >The switch register is 12 bits, and a LINK light, so I assume >it's a pdp8 clone. Could be wrong of course. Thats exactly what it is, a PDP-8e (work alike) clone. It's been a while since I'd seen one. A good washing and maybe new switches and I bet it's salvagable. Allison

19 years, 3 months

← Newer
1
...
22
23
24
25
26
27
28
...
44
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb September 2005