At Thu, 15 Jan 2004 14:33:40 -0600 "Keys" <jrkeys(a)concentric.net> keyed
in:
> At a auction today I got a lot that had a Canberra Series 35 Plus
> model 3502
> something in it? [...]
You are the proud owner of a Pulse Height Analyzer/Multichannel
Analyzer (depending what's installed). These beasties are generally
used in the nuclear physics area for spectrum analysis and timing
analysis. Contact me off-line if you want more info...
Claude Ceccon
Hi folks,
Gave my 'new' MV I a good going over this afternoon and apart from the fact
it has a pair of M7135s (MV I Datapath according to Megan's field guide) and
came with a sodding great big (and heavy) Tek 4109
screen/keyboard/tablet/pointer there's nothing too exciting in there:
M7551 & M8067 memory boards
M7957 DZV11 mux
M8639 RQDX2 to run the RD52 and RX50.
This means there's still a couple of slots to add in a DEQNA should I want
to get it on the network.
It'll have acclimatised by tomorrow so can anyone give me the pinouts of the
PSU so I can check voltages before I run the whole lot up? I'll trudge
through the snow to dig out my MVII techref just in case they're in there,
but if anyone knows off the top of their head that'd be great :)
--
Adrian/Witchy
www.binarydinosaurs.co.uk - possibly the UK's biggest online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(
I have a system that does an "autobaud" when you hit return to log in. If I
hook up a VT220, it works at 7/1/E, 8/1/N, 7/1/O, etc. etc. no problem. If I
hookup a Televideo 950, hitting return gets no response at all. This is NOT
a DTE vs. DCE problem, because the televideo does work with the same system
on a different type of serial port.
I was thinking something might be brain damaged with parity
generation/checking on this terminal. Is this a known issue of TV950's?
About the only way I can find out whats going on is to dig out my datascope
and see the start data & stop bits between the two when hitting return and
see what is different.
Any thoughts?
Jay West
---
[This E-mail scanned for viruses by Declude Virus]
Teo Zenios <teoz(a)neo.rr.com> wrote:
> Highschool? Either you are into classic computers at an early age or your
> one heck of a cradle robber lol.
I'm 24 now. I mastered PDP-11 assembly at age 7. By age 11 wrote my own OS for
a Soviet PDP-11 clone. But then I'm Soviet, so that should explain it. We
Soviets are obviously superior. :-)))))))))))))
My girlfriend is 18, but she is very mature for her age. And I have absolutely
no fear about letting her around my classic computers since she has the highest
respect for my work. We are both pagans and these computers support our pagan
work. For her to screw up the computers would be equivalent to betraying her
Goddess Herself. I will teach her how to use my operating system (a classic
version of VAX UNIX, other people in my group run other classics OSes too),
she'll have a terminal on her desk in our command room just like I do, and the
policy of no pee seas with Weendoze being allowed in the house will be entirely
reasonable and acceptable to her because it's the enemy's operating system.
Other people on this list keep whining about their wives conflicting with their
classic computing, but I will have a female partner using these great systems
together with me in our pagan work, which has brought us together in the first
place.
MS
Fred N. van Kempen <waltje(a)pdp11.nl> wrote:
> You're assuming he or she WANTS to know about "that stuff". My
> son is now just over 1.5 years old... I'll await his reaction
> to me talking about tech stuff...
Well, with proper input from BOTH parents it would be a lot easier to raise
him/her right. My gf is a witch (1st degree priestess, working on 2nd degree)
and will also have a lot of "unusual" stuff to teach to our future children.
They will be really fortunate to have a two-parent thoroughly pagan family. The
way pagans raise their children is VERY different from the common American
Judeo-Xtian way. A few months ago the Coast to Coast AM radio talk show
featured two girls who were reading ancient Sanskrit and seriously getting into
its teachings at ages 2 and 4.
MS
P.S. Anyone here a regular Coast to Coast listener? You may have heard me on
the air, as I have called in a few times. Hoping to be a C2C guest some day.
Earlier this week I was told that Dell (Mr. Dell not the company) had
purchased a very large old warehouse and was going to turn it into a vintage
computer museum of his own. I was also told that he had sent out a team to
locate old hardware and stuff for him. Anyone in the Austin area know about
this?
This may seem silly, but it occured to me this morning (musing about how
to boot an old 11/34) that I could use a device which would pretend to
be an actual tape drive.
There are lots of tape images out there (on the web) in the form of big
disk files. It would be nice to be able to turn one of my pc's into a
"virtual tape drive" by plugging a cable from the pc into a TS11
controller...
Has anyone ever seen such a device? seems like it would not be that
hard to build (he said, never having looked at the interface between a
physical tape drive and a controller like a TS11).
I hope to find an old RL01/2 drive around the Boston area (anyone?) but
even when I do it seems bootstrapping will be an issue. Even if I grab
one of those Dilog controllers which talk SCSI I'll need some way to
load up the drives initially. It's just that those 9-track drives are
*really heavy* :-)
any comments appreciated!
-brad
even if we save the raw files, how will we view them in 50 (or
even 5) years?
--
The short answer:
You won't
--
The reason will be no one will have preserved the data describing
the file formats, since it is "proprietary"
And you won't be able to simulate the systems, because the data
needed to simulate it is proprietary also.
--
Two example systems I can think of right now:
Schematics or chip designs done on products by Daisy Systems (dead, dead, dead)
or
Mechanical and electrical CAD designs done on Calcomp electronic drafting systems
based on the Xerox D-machine.
how much do you want for the 4?
I live in Fredericksburg, VA 22406.
best regards, Steve Thatcher
Original Message:
-----------------
From: Paul H Rivet energyx(a)ucs.net
Date: Thu, 15 Jan 2004 10:49:34 -0500
To: cctech(a)classiccmp.org
Subject: Kaypro
Available for purchase
I have a Kaypro 10 and a Kaypro 4. Both in excellent working condition
with programs some manuals.
PAUL H RIVET
CREATIVE ENERGY LLC
35 West Orangeburg Road
Orangeburg, New York 10962
845 359 4434
Fax 845 365 3650
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
Hello,
I just wanted to take a chance to plug MESS:
http://www.mess.org/
It is an open-source, multi-system emulator for old computers and
game consoles, based on the MAME codebase.
If someone is interested in writing an emulator of an old system,
this is one way to go. There is definitely a learning curve, but
there are preexisting modules for many microprocessors.
If anyone is interested in exploring this, feel free to contact me
directly.
Thanks,
-Frank