I recently acquired a Compaticard IV without manual and drivers.
I found a manual on the Web, but haven't been able to find the
Compaticard IV "Master Diskette," which contains a driver
(cc4drv.sys) and several utility programs to use with the card.
Is there someone out there who has this diskette who is willing
to make a copy of this diskette (either hardcopy or electronic)?
Note that I'm not talking about the Uniform software package, but
if it were available, I'd be interested in it, too!
Thanks,
Dave
--
David C. Jenner
djenner(a)earthlink.net
Anybody know where to fin one of these hardware boards that allows a normal PC
drive to be able to copy any disk from multiple platforms?
I just seen one on ebay but it was bid up quite a bit. Would be very usefull
copying all the protected early era games in my collection before the disk
media goes bad (I think you can make images of the disks that can be
duplictaed at a later date).
Well, I never got to it yet, but I have some xylogics controllers for
diablo/pertec 2.5Mb front loaders. It was the aftermarket equivalent
to the RK05. Been meaning to try to get them running on RT-11 someday,
as I have a couple of dozen packs to read. I have all the hardware, cables,
drives, controllers, but just haven't tried to get them running. They
have been sitting for over a dozen years, so I don't even know if the
drives will start up. If nothing else shows up, let me know if you
want to take a stab at it.
Joe Heck
Hi,
I've been cleaning out the attic and unboxing a bunch of stuff I stored
away in the mid-'80s. I've got seveal 8008 systems - Mark8, RGS008,
SCELBI-8H, Mod8, MCS-8 - that I'd like to get running. I also have a lot
of related docs, including newsletters and manuals that I will be happy
to share as time permits.
I also want to get a few S100 "systems" together - Imsai/ProcTech,
Cromemco, TDL, Morrow and Godbout. I'm looking for a TDL SMB board,
Cromemco Tuart and Godbout CPU-Z for starters. Maybe an H8 as well.
I've been putting some stuff - mostly MITS - up on eBay to pay for parts
and tools, but I'd be interested in hearing about needs/wants/trades if
you have any of the above. Would also be interested in an S100 6809 card
if one was ever made.
Jack Rubin
Wilmette, Illinois
USA
Did you ever get the manuals below?
I have the following manuals:
7502 SPST Relay
7387 Floppy Disk
7304 Dual USART
7880 Z80 Processor
7507 General Purpose Interface
7803A Z80 Processor
7303 Keyboard/Display
Let me know if you need them.
I am looking for the following manuals:
7842
7508
Everett Feldt
feldte(a)cox.net
-----Original Message-----
Hello, all:
I bought a STDBUS instrumentation computer off of eBay last week for
$9, and it has some interesting boards in it. Unfortunately, the boards are
mostly older Pro-Log models and information is sparse. I've made contact
with the "legacy" manufacturer who wants $50 per manual for two of the
boards. I found information for two of them on VersaLogic's Web site.
So, here's the list of boards. If any one has original Pro-Log
manuals for these that they can copy and send me, please contact me
off-list.
Pro-Log# Description
7303 DSKY (Display/keyboard module)
7502 Relay output module (8 relays)
7605 Programmable I/O
7806-1 Z80 CPU card (I have copy of VersaLogic's manual)
Other P-L boards from another system I have:
Pro-Log# Description
7805-1 8085 CPU card
7604A 64-bit digital I/O (I have copy of VersaLogic's
manual)
Thanks again for any help.
Rich
Did you ever get the manuals below?
I have the following manuals:
7502 SPST Relay
7387 Floppy Disk
7304 Dual USART
7880 Z80 Processor
7507 General Purpose Interface
7803A Z80 Processor
7303 Keyboard/Display
Let me know if you need them.
I am looking for the following manuals:
7842
7508
Everett Feldt
-----Original Message-----
Hello, all:
I bought a STDBUS instrumentation computer off of eBay last week for
$9, and it has some interesting boards in it. Unfortunately, the boards are
mostly older Pro-Log models and information is sparse. I've made contact
with the "legacy" manufacturer who wants $50 per manual for two of the
boards. I found information for two of them on VersaLogic's Web site.
So, here's the list of boards. If any one has original Pro-Log
manuals for these that they can copy and send me, please contact me
off-list.
Pro-Log# Description
7303 DSKY (Display/keyboard module)
7502 Relay output module (8 relays)
7605 Programmable I/O
7806-1 Z80 CPU card (I have copy of VersaLogic's manual)
Other P-L boards from another system I have:
Pro-Log# Description
7805-1 8085 CPU card
7604A 64-bit digital I/O (I have copy of VersaLogic's
manual)
Thanks again for any help.
Rich
All,
I have a MMD-2 which is missing the 4 ROMs. I'm looking for either the HEX
files for the ROMs or if someone has an MMD-2 and could copy them that would
work also.
Thanks
-Neil
Hi,
I found this old message of yours, any chance your friend still has one of
these LAPC-1 cards? Please let me know. Thanks.
- - - -
MPU-401/LAPC-1
Hans Franke cctech(a)classiccmp.org
Thu Jan 9 12:52:45 2003
Previous message: MPU-401
Next message: H89, REMark, Sextant
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
I just taked to my friend. The cards are LAPC-1s. He still
has two new units, and he'd be willing to part for 40 Euro
each (~42 USD), plus shipping. So if someone still wants to
build a early 90s game PC, just drop me a note.
Gruss
H.
Steve,
I built a working 8008 computer in ''73 from circuit boards from a bankrupt
canadian company. I still have the computer and I have a number of books
>from Scelbi Computers on 8008 source for basic as well as debuggers, etc .
I would really like an 8008 emulator that I could run the source on my
modern PC. The roughest beta would be fine.
I ran across a blurb about your emulator in cassictechpub/jan9-02. It had a
link to your website but I was not able to get in due to lack of login.
Would you be willing to send me the emulator? Not necessarily for free
either. It does not have to be perfect and I will not require any support.
Thanks.
Terry Young
youngt(a)isecfdeo-emh1.army.mil
