test-drb July 2003

test-drb@ccmp.vtda.org

279 participants
450 discussions

Start a nNew thread

PDP 8 for over $3000

by jrkeys＠concentric.net

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2738787795

21 years

Anybody on here do anything with the OLD intel IN-xxxx memories

by kklusend＠fatsinc.com

Hi Joe, I would be interested in your Intel IN-xxxx memory boards. Thanks, Kelvin Kelvin(a)synapticbrew.com

21 years

Plotter

by pete＠dunnington.u-net.com

On Jul 18, 19:14, James Rice wrote: > I've used both products. In my previous life, I was an industrial > control contractor in food packaging plants. We used the Loctite stuff. > to stick polyurethane conveyor belts together as in a spliced loop. There are lots of types of Loctite, though, and the one for polythene and nylon isn't the same as the one for polyurethane. Polyurethane isn't nearly s hard to stick. > >There's a type of Loctite that does as well -- even sticks polythene. > > I can't remember the number, thugh. -- Pete Peter Turnbull Network Manager University of York

21 years

HP Integral

by vp＠mcs.drexel.edu

ard(a)p850ug1.demon.co.uk (Tony Duell) wrote in cctalk-689: > Is this Tech BASIC ROM a plug-in card that goes into one of the expansion > slots, or a daughterboard in the OS cartridge, or what? Its a small board that attaches over the OS daughterboard. **vp

21 years

TRS-80 Mod I Video Display

by classiccmp＠vintage-computer.com

I've got a TRS-80 Mod 1 with a bad display. There is a horizontal scan line in the center of the screen but no vertical sweep. Is anyone familiar enough with these displays to give me repair hints? Failing that, does anyone have a working one lying around that they'd part with? Thanks! Erik Klein www.vintage-computer.com/vcforum The Vintage Computer Forum

21 years

OT-- need plans for a wireless switch

by cb＠mythtech.net

>disconnect the horn and use its button Make sure you put a switch to toggle between horn and ham radio. I don't know about other states, but you can't pass vehicle inspections in NJ without a working horn. -chris <http://www.mythtech.net>

21 years

Drive specs for Fujitsu m2682TAU

by kenziem＠sympatico.ca

it s at 350 meg drive, my copy of the hardware bible is bit too old, and all I get from google is places wanting to sell them. Does anyone have the CHS for this drive?

21 years

Plotter

by jrice54＠charter.net

I've used both products. In my previous life, I was an industrial control contractor in food packaging plants. We used the Loctite stuff. to stick polyurethane conveyor belts together as in a spliced loop. These belts ran at 2-300 ft per minute in a wet, oily, washdown environment (salad oil bottling plant) for months without a break. It was extremely expensive and the supply room checked it out and in. The clerk used to chase me down when I forgot to return the splice kit. The "cyanopoxy" stuff was used to build up delrin and teflon conveyor gudes when they wore through, until new ones could be machined out of block stock. I know it would stick a teflon gear together and would probably be stronger than the original gear. Just be careful and don't stick your fingers to the gear. You will have to remove the skin with a single edge razor blade...don't ask, trust me on this one. I can't remember how much it costs, but I'm sure it wasn't cheap. James >There is a product called "Cyanopoxy" that is like a two-part "super > > >glue" that can bond slippery plastics like delrin and molded nylon that >should work. It is fairly expensive, though. I haven't used it myself, >but I've read about it in the model railroad hobby press. > >There's a type of Loctite that does as well -- even sticks polythene. > I can't remember the number, thugh. Unfortunately it costs something >like UKP 35 for a tiny bottle (well, two bottles, actually, because it >comes with an activator). > -- http://webpages.charter.net/jrice54/classiccomp2.html

21 years

plotter

by pete＠dunnington.u-net.com

On Jul 18, 7:14, Feldman, Robert wrote: > There is a product called "Cyanopoxy" that is like a two-part "super glue" that can bond slippery plastics like delrin and molded nylon that should work. It is fairly expensive, though. I haven't used it myself, but I've read about it in the model railroad hobby press. There's a type of Loctite that does as well -- even sticks polythene. I can't remember the number, thugh. Unfortunately it costs something like UKP 35 for a tiny bottle (well, two bottles, actually, because it comes with an activator). -- Pete Peter Turnbull Network Manager University of York

21 years

Can anyone id these HP ICs?

by swperk＠earthlink.net

Hi Joe, The only reason that I can come up with for HP's construction techniques is that their IC's were made during the heyday of HP's own IC division. They overbuilt everything, probably because of reliability concerns. Other people certainly will know more about this than I do, but I think that HP was one of the earliest developers/fabricators of ECL. Thanks in advance for the manual! Regards, Stan Hi Stan, Thanks for the info. Any idea whey the fancy construction? I've dealt with ECL before but never seen anything like this. BTW I'm made copies of that memory board manual for you. It's packed and ready to ship. I'll try to drop it off at the post office today. Joe At 08:21 PM 7/17/03 -0700, you wrote: >Hi Joe, > >The 05370-60022 part number IDs this as the Arming Board from the HP 5370A/B >counter. The 1820-0753 is an ECL dual 3-input gate, the 1820-1999 is a >multiplexer, and the 1820-2000 is a D flip-flop. These are all ECL IC's, and >on each of them the two end pins are connected to the substrate and tied to >the -5.2 V bus. These two pins act as both power input and heat sinks for >the chip. > >Stan > >Message: 3 >Date: Tue, 15 Jul 2003 15:54:54 >To: cctalk(a)classiccmp.org >From: Joe <rigdonj(a)cfl.rr.com> >Subject: Re: Can anyone id these HP ICs? (Joe) >Reply-To: cctalk(a)classiccmp.org > > Bingo! You're right. It's part number is 05370-60022. I had tried to >look up that number but all I found was a scanner with the same PN. Do you >have a service manual for this? If so, can you tell me what these parts >are? PNs 1820-0753, 1820-2000 and 1820-1999. > > Joe > >At 10:55 AM 7/15/03 -0700, you wrote: >>Hi Joe, >> >>Your board looks like one of the interpolator cards from an HP 5370A >Universal Time Interval Counter. Do you see an "05370-6xxxx" part number on >the board anywhere? >> >> >>Message: 14 >>Date: Mon, 14 Jul 2003 17:52:26 >>To: cctalk(a)classiccmp.org >>From: Joe <rigdonj(a)cfl.rr.com> >>Subject: Re: Can anyone id these HP ICs? >>Reply-To: cctalk(a)classiccmp.org >> >>Hi Ed, >> >> I posted a picture at >><http://home.cfl.rr.com/rigdon14/t-bird/hp-ic.jpg>. >>I unplugged the two ICs in the top RH corner and turned them over so that >>you can see the bottom and side of the ICs and the heat sink that the IC >>normally sits on. There is a depression in the bottom of the IC case and a >>rasied pad on the heatsink that fits into the depression. I've never seen >>anything like this before! Note the delay line (?) on the LH side of the >>card. Sorry I couldn't get a better picture. This is as close as I could >>get with my camera. >> >> Joe > >-- __--__-- --__--__--

21 years

← Newer
1
...
23
24
25
26
27
28
29
...
45
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb July 2003