Thanks. Do it exist some available copy of some operative OS for
the HP2100 (in form of PaperTape, Virtual Disk or so) ?
Greetings
Sergio
----- Mensaje Original -----
Remitente: "Jay West" <jwest(a)classiccmp.org>
Fecha: Viernes, Abril 26, 2002 1:50 pm
Asunto: Re: Hp2100 software available. Where ?
> I am building an archive at www.classiccmp.org/HP for hp software.
> Note that
> the "HP" in that url must be capitalized or you'll get a different
> site. I
> just started putting stuff there so there isn't a huge amount, but
> it is
> growing very rapidly thanks to Al's great hard work scanning
> documents and
> reading paper tapes.
>
> If there's any software you're looking for that you don't see
> there, just
> let me know.
>
> Jay West
> ----- Original Message -----
> From: "Sergio Pedraja Cabo" <CAA007216(a)mail.ono.es>
> To: <classiccmp(a)classiccmp.org>
> Sent: Friday, April 26, 2002 5:08 AM
> Subject: Hp2100 software available. Where ?
>
>
> >
> > Hello everybody. I should like to probe the HP2100 simulator
> available> under Bob Supnik's SIMH. Is there any software
> repository available
> > for this machine ? I know the Jeff Moffat's website programs only,
> > but somebody spoke here some time ago about some other place where
> > to get software for this machine.
> >
> > Greetings
> >
> > Sergio
> >
> >
> >
> >
>
>
>
> From: David Woyciesjes <DAW(a)yalepress3.unipress.yale.edu>
> To: "'classiccmp(a)classiccmp.org'" <classiccmp(a)classiccmp.org>
> Subject: RE: Sun help needed... [was: RE: open "dumpster" event in New Hav
> en, CT]
> Date: Fri, 26 Apr 2002 11:11:26 -0400
> Sender: owner-classiccmp(a)classiccmp.org
> Reply-To: classiccmp(a)classiccmp.org
>
> > From: Bill Pechter
> >
> > > Anyway, to my point... This is off-topic, so taking it off-list is
> > > appropriate I believe... I have a Sun Ultra1 Creator. (170E, Open Boot
> > 3.1,
> > > 128 MB RAM, 4 GB Quantum, 1 GB Conner, floppy disk... old 19" Sun color
> > > monitor, type 5c keyb, optical mouse w/proper silver pad!) Well, now
> > that I
> > > finally got the Creator framebuffer replaced, it's time to load Solaris.
> > > Except that all the CD-ROMS I have aren't even seen by the console...
> > And I
> > > tried the sector size jumper both ways.
> > >
> > > --
> >
> > try to describe the scsi bus and termination.
> > do a probe-scsi and a probe-scsi-all...
> >
> > let me know what that does.
I'm pretty sure that there is a Sun screwup in the Ultra1 boot ROM such
that "probe-scsi" doesn't work right when "auto-boot" is enabled.
auto-boot?=false
carl
--
carl lowenstein marine physical lab u.c. san diego
clowenstein(a)ucsd.edu
Hi,
I've just been going through a load of old boards that I had occupying
space and I'd like to put some of the components to good use. I've already
located datasheets for a Motorola DSP56001FE27 digital signal processor I
found (time to build an MP3 player!), but a few of the parts have turned up
dead ends for data. The parts in question are Sierra Semiconductor (now
PMC-Sierra) SC11011CV/ADA, SC11026CN and SC22201CN chips, used on what
appears to be an old modem. I've had a look on FreeTradeZone (free? not
bloody likely) and the datasheets have been locked (the chips are obsolete).
Anyone got PDFs (or paper copies) of these datasheets? I'd like to get these
chips doing something (other than taking up valuable space), but it's a bit
diffiicult without the datasheets!
Thanks.
--
Phil.
philpem(a)bigfoot.com
http://www.philpem.btinternet.co.uk/
>Thanks but I already have 2 LC550's in the collection. These 34 or so
>are the one's I really need to make it complete. It started out as 103
>models but now because models I didn't know about but have picked over
>the years it may end up over 150 different models. I will print the
>list once the collection is done. Thanks for the offer.
You are being a little more religious than I. I just want one of every
major model (so Performa 475, LC 475 or Quadra 605, doesn't matter to me,
since they are all the same model... also I'm not going after getting a
475,476,478 or other submodels).
I am sure once I get one of every major model, I will then probably
follow in your footsteps and try to get one of everything out there.
-chris
<http://www.mythtech.net>
> -----Original Message-----
> From: Ben Franchuk [mailto:bfranchuk@jetnet.ab.ca]
> Christopher Smith wrote:
> > I'm not sure whether there were any compilers available that
> > didn't require disk drives. It would have been possible (not
> > fun) given the proper programs.
> Fortran II could compile from paper tape on the IBM 1620.
> The PDP-8 had I think a paper tape version of fortran too,
> but not sure
> what version, II or IV.
... but we were talking about the Tandy Color Computer,
specifically. :)
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
>Performa 466, 467, 550, 275,, 560, 577,578, 658
How specific are you to the titel stamped on the case? I can give you an
LC 550, but not a "Performa" 550.
-chris
<http://www.mythtech.net>
Hello all, if you've got a VAX 11/750 in running order, please could you contact me directly (I want piccies of specific bits of your VAX to help me getting mine running.)
I've been through all the docs and bits I received with the VAX, and i've got a big box of TU58 tapes, ranging from VMS install 3.1 to 5.2, VAX Fortran, and a few tapes marked TU58 Demo, or some weird filesystem names (i'll remember them later), or "Property of DEC".
I've also found a board marked "Property of DEC, Do not Remove", and discovered how hard it is to fit two- and four-finger cards into a six-finger backplane.
From: Fred Cisin (XenoSoft) <cisin(a)xenosoft.com>
>
>> What software
>> was there, that you could install and use?
>
>A "TOY" computer comes with software. With a REAL computer, you have to
>program.
No, A TOY is somthing for playing with. An APPLIANCE is a computer that
comes with software that might be useful. An example of such an APPLIANCE
is a sad affair as it could be a useful computer if you could program it.
Allison
.
> -----Original Message-----
> From: Fred Cisin (XenoSoft) [mailto:cisin@xenosoft.com]
> Did he also think that the 68000 was a copy of the 8086?
I didn't ask, but probably. I imagine every chip is a copy of
the Pentium, in fact. How would MS-DOS run otherwise? We all
know that even the Great Bill Gates wasn't able to make his
Wonderful Windows Operating System function without MS-DOS, so
it must certainly be impossible for anyone else. ;)
Those ENIAC guys are just lucky that Bill Gates was around to
give them a copy of MS-DOS when they needed it!
No, I'm not exaggerating; yes, I did say he was a "programmer."
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
> From: Christopher Smith
>
> > -----Original Message-----
> > From: David Woyciesjes [mailto:DAW@yalepress3.unipress.yale.edu]
>
> > Any tips, tricks, or other hints? Maybe something I missed? How
> > about other options for getting this puppy running?
>
> I used an RRD42 to install SunOS <something> on a SPARC IPX. It
> had a strange problem where the install program would see some problem
> with the drive and abort. If you re-ran the install program a second
> time, it would complete fine. You might watch out for that.
>
> Also, some versions of Solaris *hate* non-sun drives, and won't
> boot from them. I don't know which ones, right off.
>
> Chris
>
Okay, I'll keep that in mind. I'll be installing the Solaris 8 Binary-Only
deal...
--
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 905818
Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash