test-drb February 2002

test-drb@ccmp.vtda.org

293 participants
1043 discussions

On the subject of freakish telecom shtuff..

by carolln＠nctc.com

Do you have any pictures of this telecompaq? I have a chance to buy one and was wondering what it looked like. What is it, 286, 386, 8088 or something else? Thanks for any help! Nathan

22 years, 2 months

Idiocy on eBay, I can't stop laughing!

by whdawson＠mlynk.com

This page says it all: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=2004856941 And check out the TOS! ROLF.

22 years, 2 months

Use of the tar command (in classic unix systems of course (^; )

by rhudson＠cnonline.net

Ok, Here's what I am doing for backup to DC tape drive.. ~500 mb per tape: tar -cvf /dev/st0 -L 500000 /root /etc (... mention many directories) is this correct for backup or do I need any other flags? How do I do an incremental? (This is assuming that I am using a "Classic" system running unix...) How do I recover a file? Thanks.

22 years, 2 months

DEC BC09J cable

by pete＠dunnington.u-net.com

On Feb 28, 6:16, Tothwolf wrote: > Cat5 (category 5 rated) cable is more appropriately called UTP (unshielded > twisted pair) cable. UTP cable is not shielded, and for serial > applications, the category rating isn't very important. Keep in mind that > category '5e' cable is much more difficult to work with compared to > category 5/4/3 if you are planning to install RJ45 connectors yourself, > due to molded pairs. I've only seen one brand of Cat5e with pairs bonded. Almost all the Cat5e I've worked with is very easy to untwist. "Cat6" is usually bonded, though. > As far as wire colors go, UTP cable has a standard > color code for the individual pairs, but the pinout varies depending on > the application for the cable. There are three standards for that, TIA 568A, TIA 568B, and USOC. -- Pete Peter Turnbull Network Manager University of York

22 years, 2 months

DEC BC09J cable

by pete＠dunnington.u-net.com

On Feb 28, 14:48, Sean 'Captain Napalm' Conner wrote: > Do you mean for the outside sleeve, or the individual wires in the cable? > For the outside, there is no real standard color that I'm aware of, although > there is a standard ordering for the wires when crimping (I think it goes > orange, green, brown, blue (solid followed by white and color) but don't > quote me on that---it's been awhile since I've crimped CAT5 network cables). Not quite. It's white-with-colour then plain colour (or colour with a thin white stripe or rings), and the common order in Europe is T568B (aka 258A): white/orange pin 1 orange white/green blue white/blue green white/brown brown pin 8 I believe the common order in the States is to swap orange and green pairs, which is T568A. If you use one scheme at one end and the other scheme at the opposite end, you have a standard Ethernet crossover cable. ie, pins 1 and 2 are swapped with pins 3 and 6 but pins 4+5 and 7+8 are straight-through. > But for a regular CAT5 cable, as long as you use the same order for each > end, it'll work fine. Almost. You need to keep the pairs as pairs, on pins 1/2, 3/6, 4/5, and 7/8. -- Pete Peter Turnbull Network Manager University of York

22 years, 2 months

Multiple floppies in one system?

by Robert_Feldman＠jdedwards.com

Commands such as FORMAT, DISKCOPY and DISKCOMP ignore drive reassignments. Perhaps the MS install program did something similar to these commands. Bob -----Original Message----- From: Fred Cisin (XenoSoft) [mailto:cisin@xenosoft.com] Sent: Thursday, February 28, 2002 2:04 PM To: classiccmp(a)classiccmp.org Subject: Re: Multiple floppies in one system? <snip> BUT, ... The INSTALL program of MS-DOS 6.00 would NOT work with an ASSIGNed drive!

22 years, 2 months

Windows 3.1 DDK

by Robert_Feldman＠jdedwards.com

Thought it would be interesting to do a Windows screen driver for the HP 95LX :-) -----Original Message----- From: Douglas Quebbeman [mailto:dhquebbeman@theestopinalgroup.com] Sent: Thursday, February 28, 2002 10:08 AM To: 'classiccmp(a)classiccmp.org' Subject: RE: Windows 3.1 DDK > > Does anyone have the Windows _3.0_ SDK/DDK? > Interesting request... planning on writing any real-mode Windows drivers? -dq

22 years, 2 months

Thunderscan

by marvin＠rain.org

I've got the scanner and adapter box for the Macintosh Thunderscan that I no longer want. $5.00 including Priority Mail shipping in the US (they include the box :)!) Email me if interested.

22 years, 2 months

Windows 3.1 DDK

by RCini＠congressfinancial.com

Hello, all: Does anyone have the Windows 3.1 DDK (device driver deveopment kit)? I'm looking for it to do some spleunking of Win3.1 kernel code. I already have the SDK, but I need the DDK. Thanks. Rich

22 years, 2 months

OT: ClassicOffice Chairs

by dhquebbeman＠theestopinalgroup.com

Does anyone have a line on old office chairs with FOUR legs instead of the fscking OSHA-mandated FIVE legs? It is impossible to roll around in one of these without, when you roll back forward, having a single leg protruding such that it hits *anything* that might be in the way, like a table leg... grrr...

22 years, 2 months

← Newer
1
2
3
4
5
6
7
8
...
105
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb February 2002