I thought it might be a nice idea to bring some 8 bit British micros to
VCF. Having measured my suitcase & dug out my roll of bubble wrap here's
what I reckon I can bring. The machines won't be boxed but I will bring
power supplies (220V) for those that won't work off a generic PSU (Dragon,
QL). The BBC has a built in PSU, the electrons need 19V and the spectra 9V.
I'm open to offers, either money or kit, my aim is more to defray my
airfair than to make a profit.
Of course, if anyone's looking for anything in particular that's more
common in the UK than the USA do let me know.
Best regards
Rob
3 off Acorn Electrons - working
6 off Sinclair ZX Spectrum 48K rubber keys - 5 working, one with minor
keyboard fault (B and N keys)
2 off Sinclair ZX Spectrum + 48K - one fully working, one with some keys
not registering
2 off Dragon 32 - working
2 (or possibly 3) off Sinclair QL - all with some keys not registering.
1 off Acorn BBC Micro model B with DFS (floppy disk interface chip - less
common) - working. I may be able to bring a drive as well.
1 off Cambridge Z88
Possibly 1 off Oric 1
Hi
Sorry, I know this is quite off topic but I know a lotta people here
accumulate tons of stuff with time (like me) and there is a good chance some
will have this...
Looking for these for an older Apple system...32megs or 64megs 3.3v edo 2k
refresh 168pins...
Will trade for vintage/semi-recent/recent stuff - I have tons : networking,
DEC, Sun, SGI, Apple, 8-16 bit hobby micros etc... - Ask
Thanks
Claude
http://computer_collector.tripod.com
Moonlighting With Your Personal Computer
Waxman, Robert J.
World Almanac Publications, 1984
ISBN 0-345-31652-5
What's so amusing? The cover photograph is of a Fortune 32:16, and
placed to the left of the title and blurb "An Insider's Advice on How
You Can Earn Thousands of Extra Dollars".
Oh well, I thought it was funny.
-Frank McConnell
Well, after the recent discussion of scopes for vintage computers, I've put
together a web page with a couple of pictures of two of my scopes. One is a
Kenwood SM-220 station monitor that I use with the Ham Radio stuff. The
other is a Tektronix RM-503 dual channel scope that I use for
troubleshooting the PDP-8/E and perepherals. In the photo, it is sitting on
top of a currently non-operational Sykes 7200 Dual 8" Disk drive.
Here is the URL:
http://cmcnabb.cc.vt.edu/scopes.html
>DEC GT40. That's a PDP11/05 (with real core memory) and a VT11 vector
>display board set in a desktop case with a monitor on top and a separate
>keyboard). 3 user input devices -- the keyboard, a light pen and the
>lights-n-switches panel.
I wish I had one... I'm trying to get the hardware I need to at
least put a VT11 on an 11/05 or 11/34a so I can get spacewar
running... As I mentioned in a prior post, I found the DR11C
which has the original spacewar control boxes we used at WPI
back in the later 70s. I also found the source for the spacewar
we played -- written by a friend of mine who was also a student
at WPI...
Megan
Hi all,
Wheee.. thas been a loong weekend so far, trying to get all the
piles of DEC stuff back into cabinets and in complete, working
order... Then again, one can whine about that here, as we all
do it, sometimes with grumbling wives and annoying kids in the
dim background, but hey.. :)
Anyway. Does anyone have (part of) the following items I could
use to complete the 11/83 (BA123) box:
- BA123 front plate saying "PDP-11/83" - mine says "MicroVAX II"
- BA123 "front panel" switch set - I have one in, but kinda need
two more, if they're around
- *external* cable set for the tape unit - see below.
I have an Emulex QT13 Pertec controller doing TSV05 emulation-
runs well. However, for obvious reasons, the Cipher F880 tape
drive is external, in a neat "tabletop" kind of box, even, with
the two signal cables coming out and going into the back of the
BA123, through one of the (now empty) faceplates. I'd like to
replace that with a QT13 cab kit for BA123, and a cable I can
plug into the Cipher and then into the cab kit thing, like I
have for the (external) TK50 drive connected to my MicroPDP.
I _know_ they exist, as I have seen them... just don't know where
to look for these gadgets.
Also, if anyone in Holland still has a couple of larger ESDI
drives (600+ MB, similar to RA82) laying around.. pse contact me
off-list.. I need one to emulate a RA82.
Thanks, now back to my cabling issues here... :)
--fred
On Oct 12, 21:00, jkunz(a)unixag-kl.fh-kl.de wrote:
> On 11 Oct, Ethan Dicks wrote:
> > Uses 30 pin parity memory. May not like 3 chip PC SIMMs.
> May depend on the SIMMs / RAM chips and the refresh cycles they need.
> My SS1+ was happy with 3 chip SIMMs.
So was mine. It does depend on the refresh, though. That's why some older
PCs also have trouble with some 3-chip 30-pin SIMMs. One of my friends had
that problem.
> > Prefers 9 chip SIMMs. Can take 1MB, probably takes 4MB (mine did).
> All SPARCstations should be able to take 4 MB SIMMs as the SS1 can take
> them. (According to the sun.hardware.FAQ file.)
Yes, it does. I had an SS1 and still have an SS1+ that both have 4MB
SIMMs, and I've seen an SS2 with 4MB SIMMs.
--
Pete Peter Turnbull
Network Manager
University of York
Okay, it is a PDP-8/L, but I don't remember an -8/L with the kind
of paddle switches this one has... I seem to remember them being
the rocker kind like on a pdp-8/I
Megan
> Solaris, and the max memory is 64MB except for the SPARC 2 which can
> take 128MB with a rare and expensive add-in board.
Isn't that 96MB with a rare and expensive add-in board, and 128MB with an
EVEN rarer and expensive daughter board for the rare and expensive add-in
board.
Zane
(Sorry, I couldn't resist, but from what I've seen it's true (each of my
Sparc 2's has 96MB)).