test-drb June 2001

test-drb@ccmp.vtda.org

273 participants
682 discussions

by mcguire＠neurotica.com

On June 11, Ethan Dicks wrote: > > Anybody want a KDF11-B (M8189), or a M7165 (1/2 of a 2 board set)? They > > are yours for shipping. > > Is that 1/2 of an RLV11? 1/2 of a KDA50. -Dave McGuire

24 years

Cyber205 was RE: Ebay horror ...

by mcguire＠neurotica.com

Uhhhh...ahhh....a Cyber205? 8-) That's a VERY historically important machine in my opinion. I'd been deleting these messages as yet-another-ebay-related-flame but this message caught my attention. If there's a complete Cyber 205 in existence anywhere, I'd sure like to know about it. What is the status of this machine? Is it available? Anybody know? -Dave McGuire On June 11, Tom Uban wrote: > Not too long ago (and perhaps still) the CDC Cyber 205 was complete and > sitting in one of the Purdue University salvage buildings. This is a *BIG* > machine and would require some serious space, power, etc. > > The machine has a panel on it which there are the signatures of many > people. I think they are the signatures of the installers, maintainers, > etc. > > --tom > > >Do you *really* know people who keep mainframes rusting > >in the yard? CDC Cybers, by any chance? > > > >;-) > > > >-dq > > > >

24 years

Ebay horror ...

by dhquebbeman＠theestopinalgroup.com

> Not too long ago (and perhaps still) the CDC Cyber 205 was complete and > sitting in one of the Purdue University salvage buildings. This is a *BIG* > machine and would require some serious space, power, etc. > > The machine has a panel on it which there are the signatures of many > people. I think they are the signatures of the installers, > maintainers, etc. Do you have connections there? The first programming environment I used was ALFIE- Algebraic Language for an Interactive Environment. It was a subsystem running under Dual-MACE that provided a superset of BASIC, adding FORTRAN-like formatting. I really enjoyed running it on the ASR33s... GOOD MORNING.<DING><DING> THIS IS ALFIE.<DING><DING> Of course, morning would be replaced by afternoon and evening at the appropriate times. I also ran it on some NCR ttys and the first of many Silent 700s I've used, but it never sounded quite the same. Anyway, I'd love to get a copy of the source, if it still exists in an archive. It'll take some modifications to get it running under Kronos, but that's just work. So if you can direct me to the right person, I'd really appreciate it. Ditto for anyone who might know about the 205... Regards, -dq

24 years

Ebay horror ...

by uban＠ubanproductions.com

Not too long ago (and perhaps still) the CDC Cyber 205 was complete and sitting in one of the Purdue University salvage buildings. This is a *BIG* machine and would require some serious space, power, etc. The machine has a panel on it which there are the signatures of many people. I think they are the signatures of the installers, maintainers, etc. --tom >Do you *really* know people who keep mainframes rusting >in the yard? CDC Cybers, by any chance? > >;-) > >-dq > >

24 years

Will trade classic H/W for CP/M 2.2 help!

by ajp166＠bellatlantic.net

From: Lance Costanzo <lance(a)costanzo.net> >Speaking of CP/M and DRI, here's some web sites that may be of interest: >http://www2.gol.com/users/joewein/dri.html >http://members.iinet.net.au/~daveb/cpm/index.html >http://www.faqs.org/faqs/CPM-faq/ >http://www.retroarchive.org/cpm/ >http://members.aol.com/wwheco1/commscpm.htm >http://www.maxframe.com/GARY&CPM.HTM >http://www.daml.org/people/jflynn/algolm.html You can also get CP/M source and binaries, and online docs at http://www/cpm.z80.de >>You can buy a "new" licensed copy of CP/M (the original DR version) from >>California Digital for only $9 at http://www.cadigital.com/software.htm. It >>won't be set up for your particular computer, though, but does have the DR >>manuals. only $9 and you get a manual? dang! The manuals are a good deal alone. Allison

24 years

Ebay horror ...

by dhquebbeman＠theestopinalgroup.com

> Maybe the way to stem this trend is to make it known that there are people who'd > pay MORE for the complete units than the parts will bring. If that's not the > case, ... well ... Agreed... -dq

24 years

Talking 'bout shakin & quakin (was Re: Storage of computer an d parts in the residential area)

by Robert_Feldman＠jdedwards.com

Yes, Missouri. <begin nitpick mode> Also, it was the Mississippi River (which diverted into an area where the ground fell), forming Reelfoot Lake, and the year was 1811 (there were also quakes in 1812). <end nitpick mode> The main quake was felt over all of the US east of the Rocky Mountains. -----Original Message----- From: Vance Dereksen [mailto:vance@ikickass.org] Sent: Monday, June 11, 2001 1:24 PM To: classiccmp(a)classiccmp.org Subject: RE: Talking 'bout shakin & quakin (was Re: Storage of computer and parts in the residential area) I believe the New Madrid fault is in Missouri. Peace... Sridhar On Sat, 9 Jun 2001, John Lawson wrote: > > IIRC, the largest US quake (of which we have reliable evidence) in the > last 150 years was on the New Madrid fault in (I think) Tennessee, which > changed the course of the Ohio River. It was approaching a 9.0 R. > > So California can not claim to have *all* the fun. > > Cheers > > John > > >

24 years

Ebay horror ...

by dhquebbeman＠theestopinalgroup.com

> > I'm so mad. I'm watching on Ebay now as a greedy seller takes > > apart a PCjr, and parts out the individual pieces for obscene > > amounts of money compared the the cost of an intact system > > unit. > > Have you noticed the seller that is splitting up IBM 360 and > CDC cores and selling them one board at a time? If that's the same ad (CDC) I saw, he is at least offering full stacks, at the [StackSize] * CostPerStack price. -dq

24 years

FW: Microvax II

by jhellige＠earthlink.net

Here's an email I got today. Any help anybody could provide the person would be greatly appreciated, as I don't have the material myself. Please reply to the original sender directly. Jeff ---------- >From: "Sean & Donna Campbell" <jcdc(a)danah.com> >To: <jhellige(a)earthlink.net> >Subject: Microvax II >Date: Mon, Jun 11, 2001, 2:16 PM > >Dear Jeff >With reference to you article on Microvax II do you happen to have or know >where I could get access to a circuit diagram for the ASTEC power supply >Model no AA13010 that is inside the Microvax. >Many thanks >Sean Campbell

24 years

Ebay horror ...

by dhquebbeman＠theestopinalgroup.com

> >There are some folks who think dead computers are of value for something other > >than parts, but I don't know very many. Give the sensible ones a break, will > >you? > > I'm not saying that the PCjr falls into this category, but there are any > number of systems that even if they're not working should be kept intact and > not junked or canibalized for whatever useful parts you can get. This > mainly applies to those machines that a collector is happy to find in any > condition due to their rarity. Yeah, I was really pissed when a breaker beat me out of a local PDP-11/73 last year. Enough that I almost tried to talk the seller out of selling to me anyway, thinking I'd have to offer him some kind of sweetener for the deal so living with a bad E-Bay rep wouldn't bother him so much. Had it been an 11/40, 11/45, 11/50, or 11/70, I *would* have done it. -dq

24 years

← Newer
1
...
45
46
47
48
49
50
51
...
69
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb June 2001