I need an RM03, preferrably within sane driving distance of Peoria, IL.
Having a KS10 as a paperweight is absolutely no fun. I can trade PDP-11
stuff for one, I have all sorts of 11 kit that I'd be more than willing
to trade for KS10 stuff.
Also, if anyone has the 120V-AC plug that goes in a TM02, I am short one
of those as well - I have the 220 volt version (but the rest of the drive
is all 120 volt parts; Odd!)
Basically, I'm sick of using the KS10 as just emulation validation and I want
to get it running. ^_^
-------
> > > Does anyone know what sort of machine is in the car's
> > > onboard controller? A few pictures I've found make them
> > > look like PC104's. These machines are hitting zero value
> > > quickly and may not last 10 years unless picked up now.
> >
> > What car? They don't all use the same controllers, you know...
>
> Want a fuel injection "brain" from a 1968 VW Squareback?
Had Bosch come up with EFI already by 1968?
Every VW (and Audi & MB, etc) of that vintage that I've seen used
CIS, which was a purely mechanical system.
I have seen a 1969 Audi Super 90 (wagon) that had an aftermarket
Capacitative Discharge Ignition (CDI) System... by 1974, Audis
had those as stock, while CIS was still 1 year off...
My 1986 Audi 5000 CS Turbo Quattro uses a Motorola 6802-based
controller... very simple to upgrade, too.... ;-)
-dq
Sorry, a little overwhelmed by all this at the moment; will get back to ya.
Ethan, AIM65 stuff is ready to go.
John, still waiting to hear what you need for the Cromemcos.
Will be off 'Net till Monday.
mike
---------------Original Message-----------------
Date: Thu, 18 Oct 2001 09:32:40 -0700 (PDT)
From: Ethan Dicks <erd_6502(a)yahoo.com>
Subject: Re: Punch cards, punch & mag tapes (Toronto)
- --- "John R. Keys Jr." <jrkeys(a)concentric.net> wrote:
> Has anyone claimed these yet ? If not I will take them.
I tried to. Haven't heard back. Don't know who the lucky winner is,
but I suspect several people expressed interest.
- -ethan
------Original Message------
From: Ethan Dicks <ethan_dicks(a)yahoo.com>
--- Bill Gunshannon <bill(a)cs.scranton.edu> wrote:
> Your thinking of the Heath H11 which was in fact an LSI-11/02. But it had
It shipped as an LSI-11/03 CPU and heath made memory and IO.
My H-11 came with a KDF-11 CPU (11/23), but I don't know if it was shipped
that way or if my boss (who bought it new) upgraded it himself.
Yep, never shipped with 11/23 (KDF-11A). It was discontinued
by then if anything.
I have a couple of the Heath serial cards (one unsoldered!), the H-27
disk controller, the 8" floppies and a pile of misc DEC cards (memory,
BDV-11 boot card, etc).
The heath seriial card was a fairly flexible card copared to the usual DEC DL-11.
to debug the H-27 (he never used it). Except for the monsterous holes he blew in the side to mount additional fans, and the holes in the front he added for external console baud rate switches, it resembles its original
form once again.
The fans and switches were a common mod and handy too.
Allison
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
"Wayne M. Smith" <wmsmith(a)earthlink.net> wrote:
> I am using an HP composite video card (98204A) in a
> 9000/200 series and am getting a very small multiple
> image on the screen. Is there something special about
> HP composite video or is this just a bad card? I've
> tried the card in both a 9000/200 and 9000/220 with the
> same result. Any ideas?
Just a wild guess, but if you have an HP 35731A monochrome monitor,
try it with that. That wants composite video but with a horizontal
frequency of 30KHz instead of the more usual 15KHz. HP used that on
several different systems.
There may also be a jumper on the video card to select the
horizontal frequency, but the only thing I ever saw this on was
the HP Multimode Display Adapter for the Vectra (sort of a
combination of the IBM MDA and CGA that was good for confusing
"smart" software).
-Frank McConnell
Anybody ever see anything that uses hard sector 5 1/4 disks? I've only ever
seen one in my lifetime - just curious if they were ever used anywhere else
(the one I saw was used to load microcode into a mainframe CPU)
Hello, all:
I want to do something fun with the Altair Emulator. Does anyone
have a binary for Adventure? I don't yet have the ability to complie
programs in the emulator (because of problems booting CP/M), so I could use
a memory image.
If someone has one, please contact me off line. Thanks.
Rich
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)
In my latest box of DEC docs came a "Programmer's Reference Series"
manual for an Eclipse S/140, circa 1981 or so. useful to anyone?
bill
--
Bill Bradford
mrbill(a)mrbill.net
Austin, TX
Please reply OFF list since this is decidedly off topic. I figure there are
at least several gamers on the list who could offer their feelings on the
questions we have, hence my approaching the list.
Anyway, Beverly and I are thinking of getting our 8-yr-old a Playstation 2
for Christmas or his early February birthday. I'm not really into video
games at all so we could use some feedback. I just understand some of the
technology :-)
We've had a Nintendo 64 for the past year and its likeable. I do admit
having fun with a Donkey Kong and a couple different Super Mario games.
They are indeed challenging from a hand-eye coordination, memory and
limited intellectual standpoint, so I begrudgingly admit there is some
value for Matt to play them. However, Bev has found that most of Matt's
friends have Playstation I's and II's and that the game selection is
somewhat better than N64. Matt also expresses a slight preference for the
PS games. So, we're shopping.
Bev understands DVD's can be played on the PS 2 unit. Are these movie DVD's
they're talking about? Audio DVD's? How is the playback quality? Comparable
to an average DVD player?
Any advice on prices? Usual price at Wal-Mart, Ames and other dept. stores
is $299 so we figure that's that unless a sale pops up.
Thanks in advance.
-Chris
-- --
Christian Fandt, Electronic/Electrical Historian
Jamestown, NY USA cfandt(a)netsync.net
Member of Antique Wireless Association
URL: http://www.antiquewireless.org/