No, but it took an entire weekend and you had quad muscles *this big* by the
time you'd finished :o)
> -----Original Message-----
> From: ard(a)p850ug1.demon.co.uk [mailto:ard@p850ug1.demon.co.uk]
> Sent: 17 July 2000 20:50
> To: classiccmp(a)classiccmp.org
> Subject: Re: VAX-11/730 (was RE: Unresistable pond comment)
>
>
> > I just wish I had space in the museum for machines of that
> size, but apart
> > from anything else getting them up 2 flights of stairs
> would be a bit
>
> Wimp ;-)
>
> I took my 11/730 upstairs by hand.... It's the 'compact
> system' -- a 4'
> rack containing the CPU, an R80 drive and a TS05 tape unit.
> Of course I
> dismantled it to move it -- took all the units out of the rack, took
> everything out of the CPU board (boards, PSU, cartridge tape
> drives) and
> took the R80 apart (pulled the HDA and the PSU). The result
> was not that
> hard to move.
>
> -tony
>
Here
http://www.classicgaming.com/AqEmu/
Francois
PS:
Where do I send you an e-mail for a link correction?
>Aquarius emulator? Where?
>
>Sellam International Man of Intrigue and
Danger
>---------------------------------------------------------------------------
----
>Looking for a six in a pile of nines...
>
> VCF 4.0 is September 30-October 1
> San Jose Convention Center, San Jose, California
> See http://www.vintage.org for details!
>
>
> I couldn't find an obvious email address for him (stripping off
> "/Sorcerer" takes you to *someone's* home page, but it doesn't
> mention Sorcerer, so I'm not sure it's Philip.
Sorry, his email address on the original message to me was
phil(a)liaquay.demon.co.uk
> On my PC (win 98), with Netscape 4.7, the majority of the
> special characters don't work (i.e., they appear blank and
> don't move the cursor when hit...like double-quote (")).
> Some work, but differently. (Shift 2 (or was it shift-3?)
> got me a double quote (instead of the "@" (or #)). Also,
> backspace doesn't seem to work.
Yes, I noticed that too. Have to look at my Sorcerer keyboard to
check some of the locations of the special characters. I have an
Aquarius emulator that treats the keyboard the same way, shift-2
is the " character, etc. I've asked if I can post the source on my
Sorcerer pages. On a related note, some else in the UK has just
send me a copy of a DOS Sorcerer emulator he has been working
on. I'd like to see about getting this on my Sorcerer pages as well.
Now if I can only get some drives and CP/M for my real live
Sorcerer....
-----
David Williams - Computer Packrat
dlw(a)trailingedge.com
http://www.trailingedge.com
As I "modernize" things here, I discover that I have some surplus
equipment. The following is available immediately, for free, from
my basement in Bethesda MD (just barely inside the Washington DC beltway).
Pickup only, fist-come-first-served:
Vaxstation 3100-30, maybe 16 Megs of memory, internal RZ23 scsi disk.
Comes with VR319 19" monochrome monitor, keyboard, and mouse.
Vaxstation 3100-38, 24 Megs of memory, no internal SCSI disk.
Comes with VR260 15" color monitor, keyboard, and mouse.
The systems have been running continuously here for a couple years,
and were at TRIUMF before that, and are in functional (though maybe
a little dinged up) condition. Both have internal floppy drives,
but I never use them, so I don't know if they work. No CD-ROM
drive either, but if you bring along a 500 Meg to 1 Gig SCSI drive
and buy me lunch I'll install the hobbyist OpenVMS 7.2 distribution
on it for you from my CD-ROM.
Also available: several DEC Rainbows, Professionals, and matching
color and black-and-white monitors. Most of this stuff is in
pretty ratty condition, but I believe someone could piece together
at least a couple of working systems. Also comes with boxes and boxes
and boxes of Rainbow documentation and software on RX50's.
Drop me an E-mail (shoppa(a)trailing-edge.com) or give me a call
(301-767-5917) if you're interested. Again, pickup only, I can't
ship. And if you show up here and I'm in a good mood, I might try
to make you take some other stuff from the basement :-).
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
I can't remember if anyone replied to this; is there a US equivalent of CPC,
or are they a US firm? Over here if you buy enough you can get the part
#AVBELT3 for 50 english pennies.
a
> -----Original Message-----
> From: Bill Dawson [mailto:whdawson@mlynk.com]
> Sent: 09 July 2000 03:44
> To: Classiccmp@Classiccmp. Org
> Subject: Need U.S. source for belt for Amstrad PCW8256 3" drive
>
>
> Hello all,
>
> Here's the dimensions of the needed belt:
>
> 72mm x 3mm x 0.5mm
>
> also acceptable:
>
> 71.0mm x 2.8mm x 0.6mm or 69-72mm x 3-4mm x 0.5-0.6mm
>
>
> The rest of the story:
>
> I picked up an Amstrad PCW8256 today complete with printer, original
> disks (LocaScript and CP/M Plus), 2 game disks with instructions, 5
> spare disks with LocaScript files from the previous owner,
> the Start Up
> Guide and the User Guide. All for $10.00.
>
> It is in great condition and appears to have had little use. However,
> this is the first Amstrad I've ever owned (or seen for that
> matter), and
> also my first experience with these strange 3" floppy disks and drive.
> I was told it worked, but upon getting it home I found it
> wouldn't boot.
> After some poking around I decided to take the floppy drive out and
> check for head movement. This is when I discovered that the
> floppy only
> spun when I pulled up on the pressure pad. At this time it started
> seeking, so seeing that the spindle is belt driven, I knew where the
> problem was. I removed enough screws and connectors to get to the old
> belt out and replaced it with an appropriately sized rubber
> band. After
> reassembly, everything now works great. It boots LocaScript,
> CP/M, and
> runs the games.
>
> But.....
>
> I'd like to replace the rubber band with real belt.
>
> Can anyone help?
>
> Bill Dawson
> whdawson(a)mlynk.com <mailto:whdawson@mlynk.com>
> ?
> Your computer will do far more than you ever expected it to,
> and that won't be enough.
>
> Pournelle's First Law
>
RCS is about to get an IBM 7361 Fastdraft CAD system - apparently an S/I
based, two headed, big white box. At least that is what we think. All we
know so far is that it dates to the early 1980s.
Does anyone have any information on this box? Stories? Rumors? Anything?
William Donzelli
aw288(a)osfn.org
Philip M. Scull in the UK send me a link to add to my Exidy
Sorcerer pages for a Sorcerer emulator he was working on in Java.
It was pretty neat. Thought I'd pass it along to everyone here. URL
is:
http://www.liaquay.demon.co.uk/Sorcerer
Comes up in BASIC and of course I/O is limited at the moment but
he's still working on it. It runs as an applet in a Java-enabled
browser.
-----
David Williams - Computer Packrat
dlw(a)trailingedge.com
http://www.trailingedge.com
Yup...
> Am I right in assuming DVM=digital voltmeter?
>
> a
>
> > -----Original Message-----
> > From: Douglas Quebbeman [mailto:dhquebbeman@theestopinalgroup.com]
> > Sent: 18 July 2000 13:34
> > To: 'classiccmp(a)classiccmp.org'
> > Subject: RE: Repair or Replace? [Was: Repairing Timex]
> >
> >
> > > Surely any serious computer hobbyist, especially one who is a
> > > collector or preservationist, has at least the following: DVM,
> > > oscilloscope (even if just an old 5mHZ one to look for
> > things like PSU
> > > ripple/spikes), soldering iron, logic probe, assorted
> hand tools and
> > > perhaps a logic analyzer. These are not things that the
> > average hobbyist
> > > should be unlikely to have.
> >
> > I guess I got spoiled by working at the university and at a local
> > electronics trade school, and then later for a small
> embedded systems
> > firm. I almost always had a scope of someone else's
> available to use.
> > Now I don't, and I regret not picking up a dual-trace 15 or 20mHz
> > scope when I'd see one available, cheap, from time to time.
> >
> > My favorite was the Tektronix storage display scope. Now, I just
> > try to get by using a Rat Shack logic probe and a DVM. Plenty of
> > soldering irons (one Ungar, one generic one-piece, one Wahl), and
> > various hand tools. A manual wire-wrap pen somewhere. A CSC bread-
> > board. A fair selection of components, new and used.
> >
> > -dq
> >
>
> Surely any serious computer hobbyist, especially one who is a
> collector or preservationist, has at least the following: DVM,
> oscilloscope (even if just an old 5mHZ one to look for things like PSU
> ripple/spikes), soldering iron, logic probe, assorted hand tools and
> perhaps a logic analyzer. These are not things that the average hobbyist
> should be unlikely to have.
I guess I got spoiled by working at the university and at a local
electronics trade school, and then later for a small embedded systems
firm. I almost always had a scope of someone else's available to use.
Now I don't, and I regret not picking up a dual-trace 15 or 20mHz
scope when I'd see one available, cheap, from time to time.
My favorite was the Tektronix storage display scope. Now, I just
try to get by using a Rat Shack logic probe and a DVM. Plenty of
soldering irons (one Ungar, one generic one-piece, one Wahl), and
various hand tools. A manual wire-wrap pen somewhere. A CSC bread-
board. A fair selection of components, new and used.
-dq
> I have the ability to burn most "mainstream" eproms that
> would be used in
> classic machines (from 2716's up to IIRC 27128 or 27256's)
> which I do know
> many other folks don't have the ability to do... So I think
> part of the
> "what would you fix vs. part out" question has a lot to do
> with what people actually have the ability to fix.
Before I started all this I woudn't have dared doing things like chip swaps,
de-soldering and re-soldering components, changing drive belts and general
easily-spotted repairs. Now I'll attempt apple floppy drive repair, I found
and fixed a bent pin on the mobo socket that stopped the brightness control
working on a Colour Classic, found blown fuses, bad connections, oxidised
chip pins etc and over a few months have acquired enough tools to do most
things. Though I still haven't got the right size nut spinner for my Lisa's
screen mountings :) Still can't troubleshoot dead chips either.
a
