I just came into ownership (well, I've have it a couple of days) of a
Supermac Technology Enhance card that was an internal upgrade for a Mac128K.
I need some information on this card, such as feature set, connectors, etc.
Basically I need a manual, a copy of same, or to communicate with someone
with experience
with this vintage card and a Mac 128K.
Anybody know about it?
Thanks,
John
jlewczyk(a)his.com
>Probably should make one thing clear here, as long as it's just the one room
>and the garage, I plan on simply running one cable and connecting a hub in
>the house to a hub in the garage.
It's fallen a bit out of fashion in the past few years, but 10Base2
(50-ohm RG58 Coax) is particularly useful for the "home runs" between
twisted-pair hubs. Many twisted-pair hubs come with Coax connectors for
just this purpose.
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
>> I've found a box with 2 x 8" floppy drives. . . . external to some unknown
>> computer.
>>
>> The box is a Panasonic JB3038P and inside are 2 X JA751 drives.
>> The drive connectors and the cable coming out of the box are all 50 pin,
>> exactly like an internal SCSI cable. Unfortunately it isn't recognised by a
>> SCSI controller, at least not without fiddling with parity and stuff like
>> that.
>Why on earth do you think it would be SCSI? The standard 8" floppy drive
>interface (a de-facto standard defined by the SA800) is a 50 way ribbon
>cable. I'd bet that's what you have.
It *could* be SCSI, assuming a SCSI <-> SA800 controller is in the box
with the floppy drives. These are found not too uncommonly on some
Apollo and other early workstations. The ones that I've had to deal
with were actually SASI.
But, yes, 99% chance that it's just the SA800 interface cable.
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
This fellow emailed me looking for some DEC parts.. maybe someone on the
list will be able to help him out.
Kevin
---------- Forwarded message ----------
Date: Sat, 20 Nov 1999 21:40:35 -0500
From: jmccance(a)muskingum.edu
To: A2K(a)ONE.NET
Subject: request
hi kevin
got your name from the classic computer rescue list. hopefully
you'll have some things that are surplus to you that you would
be willing to sell. so here is my wish list;
Dl11-E or DL11-W serial cards, 3
VS2000 12-meg mem, 4
VS40X 8-plane card for '2000 1
M8267 fp11-a /34a fpp 1
M8268 kk11-a /34a cache 1
( my /34 has the M8265 and M8266 cpu)
M8061 rlv12 rl-01/02 controller 1
M8017 dlve1 serial card 3
a unibus card that talks mscp on one side and st412/506 on the other.
or,
a unibus card that talks mscp on one side and scsi on the other.
yea i know, i want the moon;-}
also need the pin-out info for a DR-11C (M7860) and a AR-11 (M7809),
or tell me where on the net this can be found.
if you have any of this available for sale, please quote prices,
either per item or bundled as a lot and i'll see what can be
afforded.
thank you for your consideration of this request.
reguards
john
john w mccance
cambridge oh 43725
740 439 0182 home
jmccance(a)muskingum.edu
--------------------------------------------------------------------
| i am in no way affiliated with Muskingum College. |
| The College is a community oriented school and the nice folks |
| at the computer center make available login accounts for |
| people in the community to have some access to the internet. |
| Many Thanks to them. |
|__________________________________________________________________|
> Subject: MicroVax I wont boot
>
> Here is the Capture File out Hyperterminal:
>
>
> MICROVERIFY STARTED
>
> MICROVERIFY PASSED
>
> 00000000 03
> ATTEMPTING RESTART
>
> RESTART FAILED
> ATTEMPTING BOOTSTRAP
>
> %BOOT-F-ERROR, None of the bootable devices contain a program image
> 000008B3 02
>
> It leaves me with a >>> (prompt)
> that seems to accept one character commands
> Is htere a way to send it a file that will direct it to Disk or Diskette?
>
> Several years have passed since I 've had this thing running and I believe
> I used to be able to list Devices.
>
> What Have I forgotten? Is there a generic default boot device target? Or
> do I need to specify one?
>
> Any reference Docs online to boot uVAX I?
>
> Larry Truthan
> truthanl(a)oclc.org
>
>
Hi,
I just received an IBM 5120, from Germany. The back says 200/210/220 volts
at 50 Hz. However, opening it up and looking at the power supply reveals
enough choices in wiring that I suspect the power supply might already be
capable of being easily adapted to 110/60 Hz ... does anyone have
any familiarity with this system? Otherwise, I'll be visiting
Fry's for something (transformer?).
thanks,
Stan Sieler
sieler(a)allegro.com
Stan Sieler sieler(a)allegro.com
www.allegro.com/sieler/wanted/index.htmlwww.allegro.com/sieler
I saw this in a newsgroup and I am just passing it on.
>In article <19991112094324.07490.00000376(a)ng-fg1.aol.com>,
>rborliniwm(a)aol.com (RBorlinIWM) wrote:
>
>> Want To Buy HP 3000/928 W/100 User License!!!!
>>
>> Bob Borlin
>> 440-449-8006
Did you ever pick up the Univac?
-----Original Message-----
From: Owen Robertson <mrdos(a)swbell.net>
To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu>
Date: Wednesday, November 03, 1999 11:06 PM
Subject: New Collector in Need of Help!
I am kind of new to the collecting game. I am in need of some help. I need someone to tell me where I can find older and larger computers. I have a lot of micros, but now I am looking for bigger game. I have decided to focus my collection on older mainframes and minicomputers. Can anyone point me to sources? I found a local business that has older and larger computers, but the owner and I didn't hit it off. It's really a shame. He had some great stuff. While I was there I had to watch the workers scrap what looked like a very old classic control panel. Also, someone recently offered me a UNIVAC System 80. Anyone know anything about it? Is it something worth having in a collection?
>It is with pleasure that I report that the pdp-11/60 in Vancouver has
>been rescued!
Great news... kudos to all involved... score one for our side... :-)
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
OK, I've got most of the boards out of the PDP-8/m, and some of them are
rather in need of cleaning. Anybody have any recommendations? I don't
remember what the suggestions were the last time this came up, I just
remember that my method (Pink Pearl Eraser) was recommended not to use :^)
Zane
| Zane H. Healy | UNIX Systems Adminstrator |
| healyzh(a)aracnet.com (primary) | Linux Enthusiast |
| healyzh(a)holonet.net (alternate) | Classic Computer Collector |
+----------------------------------+----------------------------+
| Empire of the Petal Throne and Traveller Role Playing, |
| and Zane's Computer Museum. |
| http://www.aracnet.com/~healyzh/ |