It's a user interface. There was a little helper guy, who could be a
puppy, smiley face, etc. Not >10 years yet. The metaphor was of a room.
You would click on a calendar hanging on the wall to get an appointment
book, for example.
>What exactly is Bob? I've often see it mentioned, but never with any
>background to what it actually does.
>
>Thanks,
>Tom
>
>Sysop of Caesarville Online
>Client software at: <http://home.earthlink.net/~tomowad/>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
I would say no more than $10 unless the buyer has no idea what he's
getting.
>One word: rubbish. i have a mac with the same model number. the mac+
had that
>signed case and i think all earlier models did too. as its been said
before,
>its only worth as much as someone wants to pay for it.
>
>david
>
>In a message dated 98-06-30 10:28:47 EDT, you write:
>
><< >> A friend recently told me that the Macintosh I own (Model M0001
with the
> >> autographs inside the case) is worth money as a collectable. Can
you tell
> >> me if this is true and if so where I might get information on
selling it.
> >> Thank you for your help.
> > >>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
On Jun 29, 21:27, wanderer wrote:
> Does anybody know where to get the number buttons (specifically #2
> and #3) for the RL02's, so I can use my extra units as such, or is
> there another to let the units know that they should not act as unit
> #0 and/or unit #1?
The switches are made by Honeywell, and you can still get part of the range
>from Farnell and others, but not -- AFAIK -- the covers. I discovered that
juciciously placed matchsticks would do the trick, but after a while I got
so fed up that I made my own buttons from scrap perspex.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
On Jun 30, 18:04, Philip.Belben(a)powertech.co.uk wrote:
> > Other people insist a microprocessor is one chip only.
>
> So I notice. But by that definition _none_ of the micro PDPs were true
> microprocessors, or at least none up until the 73. The Micro J-11
> processor in the 73 was implemented as two chips on a large ceramic
> carrier. Was this also the case with later J-11s?
Yes, it is. But if you allow a J-11 as a microprocessor, you must also
allow the F-11 (as in 11/23, 11/24) since it too has the complete CPU on
one (40-pin) carrier. The other devices that make up the chipset are truly
optional. You'd also need to allow the T-11 processor.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
Hi, Foster.
> Thanks for bringing this to my attention. What a lack of etiquette!!!
No big problem, if someone doesn't tell you, how can you know?
> I had no idea I had posted in HTML.
All too easy to get the Micro$oft defaults set that way :-) You're not
the first, and surely won't be the last. Nice to see you've fixed, too.
Unfortunately, some people (eg some Microsoft wallahs) think it's neat to
use HTML.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
I have gotten hold of 5 working (and very attractive as well durable)
Intel model PSYP3022254DOX machines with 386DX-25 processors and two
case fans in each, one behind the front plate (to cool cards I guess)
and the other in the normal AT style power supply.
As usual, no docs. This is not a problem as most is self explanatory.
There is one jumper on the mainboard though that goes in either 1-2 or
2-3 that's marked "Unix", nothing else. Anyone have any idea what this
would do? I've moved it but nothing,but I haven't loaded Unix on it
either.
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
SOURCE: THE SOUTH CHINA MORNING POST via First! by NewsEdge Corp.
DATE: June 27, 1998
INDEX: [10]
----------------------------------------------------------------------------
THE SOUTH CHINA MORNING POST via NewsEdge Corporation : So much has been
said about Java that it probably is lost on most people. Many hear the word
Java and recollect pre-conceptions about the subject, be they positive or
negative. Most are unaware that developments are taking place.
One of the most recent events, excluding disputes between the likes of
Sun, Microsoft and Hewlett-Packard over the future of the Java environment,
is the emergence of Java-based thin clients.
Sun began it all by offering the JavaStation network computer that runs
the JavaOS system, an entirely Java-based operating system designed for NCs.
Now, Sun is working on JavaOS for DOS PCs, making allowing obsolete PCs to
become the equivalent of a JavaStation.
The JavaPC software is in beta development, with a preview available from
Sun's Java developer's Web site at http://
developer.javasoft.com
The final release is expected to sell for about US$100, and it is clear
how this product offers a way to use hardware once thought obsolete.
It is possible to take a 486-based computer with 8 MB or 16 MB of memory
that runs DOS and turn it into a full-featured network computer with a Web
browser with full network connectivity.
The JavaPC environment runs on top of DOS, which provides such basics such
as access to the hard disk and floppy disk, plus the display and basic
network drivers.
The rest, including all the more complicated network support and the Java
implementation, is provided by the JavaPC software which implements the
functionality of the JavaOS found on the JavaStation series of NCs.
Of course, to run a JavaPC system means being connected to a network since
the whole concept of the JavaPC and Java-based NCs is to access Java-based
content including Web pages and applications on servers elsewhere on the
network - either on the Internet or an intranet.
Also, since the JavaPC is designed to run on an Ethernet network and not a
dial-up modem, it is aimed at the corporate environment where can provide
applications written in Java to be used on the Java-based NCs.
In my tests, the hardest part of configuration had nothing to do with the
JavaPC software itself but rather with configuring DOS with my network card.
JavaPC can work with the NDIS or ODI drivers shipped with many network
cards, but I opted to use a free set of network card drivers known as packet
drivers which can be downloaded from the Internet and are included with the
JavaPC software.
After several attempts to get the packet drivers to work with my card, I
switched to a different card and things worked without difficulty.
Once the network card was configured, I was able to configure the rest of
the software quite easily, using an added utility that allowed me to answer
a series of questions and have my configuration files built for me.
Once done, it is possible to browse the Web immediately, using the built-
in Web browser and run some small Java programs installed on my test
network's server.
One benefit of the JavaPC over dedicated NC hardware is that it allows
organisations to continue to use existing DOS and even Windows 3.1
applications and systems.
Also, Java-based network capabilities can be added without disrupting
existing work. This lets you gradually move mission-critical applications to
a Java-based client-server environment.
However, the PCs need a minimum 486, 66 MHz PC with at least 8 MB of RAM.
A low-end to mid-range Pentium is preferable and 16 MB of RAM is better.
Of course, an entry level PC these day is quite inexpensive and would
provide more than adequate power for running a JavaPC system.
Full information about the JavaPC as well as other Sun Java products is
available at Sun's Java Web site at http://www.javasoft.com/
Copyright(C) 1998 THE SOUTH CHINA MORNING POST
<<THE SOUTH CHINA MORNING POST -- 06-24-98>>
If there are any ProcTech SOL owners out there, I have recently acquired
an old CUTS tape from PROTEUS, the Sol User's Program Library. Lots of
miscellaneous stuff. If you would like a copy, email your address, or send
me some stamps - whatever.
A friend is looking for a SCSI card for a a VAX 6000 with VMS drivers.
Any good folk out there have one available, or know of a source?
Also, I have 3 shrink-wrapped and 5 slightly used DC-600A tapes
available to the first person with $5 for shipping.
Bob Stek
Trust me, I've been looking all over for a Linux port to a otherwise CE
device. Linux CE... there are distributions that are small enough and with
enough apps to run, but most of them are x86, and I'm betting on a pripority
system bus... so it'd be increasingly difficult..
Ciao,
Tim
-----Original Message-----
From: Ward Donald Griffiths III <gram(a)cnct.com>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Saturday, June 27, 1998 9:49 AM
Subject: Re: OS's In ROM's (was: Re: Mac Classic prob (was Macintoshes..
>Hotze wrote:
>>
>> Come to think of it, ALL of the Windows CE devices have their OS in ROM.
>> *My* opinion is that for UNIX hardware, it's going to be UNIX's biggest
>> competitor. Most Windows CE devices run off of UNIX-style processors, as
>> that's the only way that they can get any speed inexpensively and with a
>> decent battery life.
>
>So we put Linux on the little bastards. It's in the works for the Pilot
>once the thing carries 4Mb of RAM standard (probably a couple months)
>Naturally, it won't be exactly ROM'd.
>--
>Ward Griffiths
>They say that politics makes strange bedfellows.
>Of course, the main reason they cuddle up is to screw somebody else.
> Michael Flynn, _Rogue Star_
Does anyone on the list collect NeXT systems? I had the chance to see
one the other day and now I am hooked... but they wanted 500 bucks for a
33mhz turbo color cube (IIRC...) w/ a 21" sony monitor. in any case,
(and i realize i'm stepping in a big heaping pile here) what's a
reasonable cost for these systems? after using afterstep for linux, i
would love to use nextstep and use the real thing.
-Eric