test-drb November 1998

test-drb@ccmp.vtda.org

185 participants
940 discussions

by roblwill＠usaor.net

> Generally you type int he sequence where you run what's in memory at the > beginning of the ROM address, usually C800 as the primary controller. At the > Debug prompt you type G=C800:5 or it may be G=CC00:5 or G=D000:5 as well as > another I forget. It also is dependant upon the controller itself but they > usually followed some standards. > I'll need to try the other addersses. I'm basically assuming that <G=C800:5> is an incorrect address, since it causes the computer to reboot. > Once the program starts you have to figure out what they're asking for as this > is where they get different. Western Digital controllers were pretty > striaghtforward. > That they were. I've worked with them in my Tandy 1000's. -Jason *********************************************** * Jason Willgruber * * (roblwill(a)usaor.net) * * * * http://members.tripod.com/general_1 * * ICQ#-1730318 * * /0\/0\ * * > Long Live the 5170! * * \___/ * ************************************************

26 years, 1 month

Spring Cleaning - Revisited

by Anthony.Dellett＠Staples.com

Okay, to avoid confusion, I'm going ahead and adding prices to these. Some prices are negotiable, most are firm. $10 plus shipping, the RAM cards alone are worth $10 :) Atari 800 (not working, parts?) $30 each, they work and include cables Atari 1050 Disk Drive (two of them) $30 each Commodore 64 (complete in box, I have two like this) $30 for the working grey one, the broken one is a white one and I'll sell for $10 Commodore 1541 Disk Drive (2 in box, one works, one doesn't) $25 Commodore 1541 II Disk Drive (complete in box) $35 Commodore 128 (complete in box) $25 Commodore 1571 Disk Drive (complete in box) $100, it's in beautiful shape. Compupro S-100 Enclosure (motherboard and PS only, no cards) $600, it works, it needs a DPST toggle switch (whomever owned it before me moved power off the front panel to a toggle switch in back, it broke recently) or you can move the power back to the front panel. IMSAI 8080 With: 8080 Processor Card (IMSAI) SIO4 (Godbout w/docs) RAM64 (Godbout w/docs) PIO8 (IMSAI) $40 Kaypro I (incl. boot disk) $40, this has a third party RTC upgrade in it, it needs new batteries. Kaypro II (incl. boot disk) $40 Kaypro IV (incl. boot disk) Make offer. The cards are in pretty good shape but the disk drives are shot and the power supply needs restoration. NorthStar Horizon (not working) $200. Works perfectly, comes with Graphic CP/M 2.2 NorthStar Advantage (works completely, with boot disk) $20, good for parts. Might actually be repairable. Has the modem upgrade. Osborne I (not working) $50, works great, I have CP/M and P-System boot disks Osborne Executive (incl. boot disk) $300, mostly works, needs a $5 replacement keyboard encoder Processor Technology SOL w/SOLOS personality module $30, cute little all-in-one system Sanyo CP/M System (with software) $30 TI-99/4A Computer (beige model, in box) $60 TRS-80 Model III (with some software) $50, for both 8" DS/DD Floppy Drive (in wooden enclosure) and Controller (Godbout w/docs) 8" SS/SD Floppy Drive (no enclosure) $150, it's a really nice subsystem. 8" SS/SD Dual Drive Subsystem (ICOM) $50 8" Hard Disk Drive in enclosure w/controller (Fujitsu Hard Drive, Godbout Controller w/docs) A couple of things I forgot... $30 Macintosh Portable - Needs a new display cable and battery. Includes carrying case. $50 "Fat" Macintosh - Mac 512K, works great, in original box with original packing. $20 CoCo 2 - Works peachy $30 Epson HX-20 - Brand new, never used. Works great. $50 HP 9835B - Works perfectly, even the printer. Buyers pay shipping charges FOB Lawrence, Massachusetts. I'm willing to pay parts of shipping on larger items. Whatever isn't spoken for here by next monday (11/9) will be posted on Ebay. Thanks Tony

26 years, 1 month

FA: Apple Lisa and Apple IIC LCD Display

by sinasohn＠ricochet.net

At 05:53 PM 11/1/98 +0000, you wrote: >> would've appreciated an offer on this list first rather than going to ebay and >> then announcing it to us all.. that would have been an even better >I hate Ebay and always kick Ebay for loss of intellegient control to >keep things in reasonable terms and less of "out of control", root There are a lot of people who seriously lament the fact that they'll never be able to afford to buy a house in San Francisco. Why? Because there are a lot more people who want them then there are houses. So the prices go up. You can't fault the people who sell them for not selling them cheaper. Sure, you can lament the fact that there are more collectors out there than there are Apple I's or whatever, but it won't do you any good, and it makes no sense to chastise ebay for creating an efficient way to get those items in front of more people or sellers for using that method to get the most for their items. That's life, my friend. If you don't have the $ to buy on ebay, you can instead work a little harder and find the same things elsewhere for lower prices (our own beloved Sam is an excellent example of this.) If you've got the $, you can be lazy and just bid a zillion samolians on ebay. --------------------------------------------------------------------- O- Uncle Roger "There is pleasure pure in being mad roger(a)sinasohn.com that none but madmen know." Roger Louis Sinasohn & Associates San Francisco, California http://www.sinasohn.com/

26 years, 1 month

Now quite OT: Re: ePay

by sinasohn＠ricochet.net

At 11:05 AM 10/26/98 -0800, you wrote: >What I'd love to see is a live auction site, where the auctions for each >item don't last more than 10 minutes or so. Descriptions/pictures for the When I was working for Compuserve's Collectibles Forum (a few years back, before my mom passed away), we did just that for the "Other Collectibles" section. I believe they did it for coins as well. Given IRC or something similar, it wouldn't be hard to do. I don't think web-based live auctions would work; updates wouldn't be live enough. --------------------------------------------------------------------- O- Uncle Roger "There is pleasure pure in being mad roger(a)sinasohn.com that none but madmen know." Roger Louis Sinasohn & Associates San Francisco, California http://www.sinasohn.com/

26 years, 1 month

Mac emulators?

by SUPRDAVE＠aol.com

there's one i have on cd called executor2 that runs most but not all pre system7 apps pretty good. not good with sound though. In a message dated 10/30/98 8:19:28 PM US Eastern Standard Time, roblwill(a)usaor.net writes: > Hello everyone! > > Is there such a thing as a Mac emulator for a PC? I'd like to download > some Mac stuff from the internet, but the only computer that has internet > access is a PC. > > Any suggestions (besides buying one of those Mac/PC programs)? > > ThAnX,

26 years, 1 month

Revamped Web site up

by rcini＠email.msn.com

Hello, all: I just revamped my Classic Computing web site because I wasn't happy with its organization. Check out http://highgate.comm.sfu.ca/~rcini/classiccmp/ and let me know what you think. (I already know that I have to fix the hyperlink colors.) Rich Cini/WUGNET - ClubWin!/CW7 - MCP Windows 95/Windows Networking - Collector of "classic" computers <========= reply separator ==========>

26 years, 1 month

Acorn BBC Micros

by pete＠dunnington.u-net.com

On Nov 4, 19:43, Tony Duell wrote: > > I guess I'd need a PAL monitor > Well, there are 3 monitor outputs on a BBC micro. > The second is a BNC socket carrying composite video. By default this is > monochrome (no PAL subcarrier), but you can add an internal link on > late-version machines to add the colour (PAL, of course) information. On the earlier machines (Issue 2 or 3 PCB) you just need to add a 47nF capacitor to link the colour burst signal from the circuit that drives the modulator, to the circuit that drives the composite video. > The last video output is a 6 pin DIN socket. It carries TTL RGB signals > and compositie sync. If you can find a RGB colour monitor that can use UK > rates (and a lot can), then you can connect it here. The Philips 8833 monitors that (at least in Europe) were badged by Commodore and Atari for Amigas and STs work very well. But be warned - the Beeb outputs composite sync, and the centre pin of the RGB connector goes directly to the +5V supply -- which a few monitors don't like. -- Pete Peter Turnbull Dept. of Computer Science University of York

26 years, 1 month

Looking for Sony V7021 IC data sheet and Amiga UNIX questio

by mark_k＠iname.com

On 4 Nov 1998 Eric Smith wrote: >> Does anyone have a data sheet for the Sony V7021 IC? This is a video decoder > >That's not a Sony part number. Sony used > CX<digits><suffix> >on older stuff, and > CX<letter><digits><suffix> >on newer stuff, where letter is M for memory, P for processor, A for analog, >D for other digital, etc. > >What other numbers are on the part? Does it actually bear a Sony logo? It absolutely is a Sony part. 28 pin package, pins are on a finer pitch than "normal" DIL ICs, maybe 0.4 wide. On the chip is printed: SONY [the Sony logo] V7021 (C) Asuki [Asuki is in Japanese katakana, not romaji] 142B95K On a related subject, can anyone recommend a cheap IC which I can use for buffering RGB signals, to driving 75ohm-terminated outputs? -- Mark

26 years, 1 month

Do You Have a PDP-11/03L?

by pete＠dunnington.u-net.com

On Nov 4, 18:42, Daniel T. Burrows wrote: > Subject: Re: Do You Have a PDP-11/03L? > > >I have an 11/03L carcass and am hoping to use the backplane for a set of > >11/73 boards I've acquired for a friend. > I would be very cautious installing the 11/73 boards into an 11/03 > backplane. You won't do any harm on a genuine DEC backplane; the worst that'll happen is that BDAL18-21 won't be bussed. 11/73S machines were sold in BA11N boxes, which are very similar to the original 11/03 and 11/23 boxes. However, be wary of Plessey backplanes; some of these put 24V or AC voltages onto the "spare" bus lines. > I have numerous BA23 chassis here if you need one but I would > look locally for a MV2 or 3 to save shipping costs. I usually pick up MV2's > for $5 to $50 depending on what is in them. > Also look for the BA123's. They were only sold for MV's but they make good > PDP11 test beds. MicroPDP-11/83s were sold in BA123 cabinets. -- Pete Peter Turnbull Dept. of Computer Science University of York

26 years, 1 month

Do You Have a PDP-11/03L?

by dburrows＠netpath.net

>I have an 11/03L carcass and am hoping to use the backplane for a set of >11/73 boards I've acquired for a friend. I would be very cautious installing the 11/73 boards into an 11/03 backplane. I have numerous BA23 chassis here if you need one but I would look locally for a MV2 or 3 to save shipping costs. I usually pick up MV2's for $5 to $50 depending on what is in them. Also look for the BA123's. They were only sold for MV's but they make good PDP11 test beds. I have a couple here just for testing PDP11 parts. Dan Burrows

26 years, 1 month

← Newer
1
...
73
74
75
76
77
78
79
...
94
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb November 1998