On May 4, 8:34, emanuel stiebler wrote:
Correction, directly from the manual. RL01 or RL02
emulation ;-))
But serious, there are two version of the SC02 board. The SC02/L emulates
the Rl01/Rl02 disks, and the SC02/C emulates the RK06/RK07 disks.
Looks to me, that the big difference is in software, because both of
these
boards look very similar.
The boards are identical. The difference is in the firmware. If Emanuel's
information about an SC02/L is correct, then there at least *four*
versions, because:
SC02/A RP11 emulation, compatible with RP02/3 disks
SC02/B RH11 emulation, compatible with RM02/3 disks
SC02/C RK611 emulation, compatible with RK06/7 disks
These are the only ones I've seen in Emulex docs. There are similar
versions of the SC03, which also has a /MS variant, which supports MSCP. I
assume there are similar variants of the SC12, which is the Unibus version.
However, the original enquiry was about a SCO210101-CXL, which is an
SC02/C.
Dan was correct.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York