29 Aug
2015
29 Aug
'15
3:11 p.m.
this is similar to harvest one I have as my tiny baker. BUT I do not
see a temp control..
more details!?
even the temp control on harvester not to be trusted,,,, I have a long
Kodak process thermometer I stick in for the occasional temp check....
IF IT DOES NOT HAVE A TEMP THERMOSTAT DO NOT GET
Ed# _www.smecc.org_ (http://www.smecc.org) a baker since before it was
proper!
In a message dated 8/29/2015 1:27:02 P.M. US Mountain Standard Time,
cube1 at charter.net writes:
On 8/29/2015 1:04 PM, Fred Cisin wrote:
Ooooh. Thanks for the pointer to HarborFreight. I think I will pop
over to the store with a tape and see if they have one out to see if it
is suitable today or tomorrow.
JRJ
On Sat, 29 Aug 2015, COURYHOUSE at aol.com wrote:
drying/baking.
I thought the center thing was a duct also
Ed#
Baking diskettes in it would reduce the central ducting.
The HarborFreight food dehydrator (#66906 $30, currently sale at $25)
will work with the central ducting partially blocked.
It has a heating element. On the ones with an incandescent bulb, using
a CFL will reduce power consumption, but it doesn't do much 
29 Aug
29 Aug
3:26 p.m.
On 8/29/2015 5:11 PM, COURYHOUSE at aol.com wrote:
this is similar to harvest one I have as my tiny
baker. BUT I do not
see a temp control..
more details!?
even the temp control on harvester not to be trusted,,,, I have a long
Kodak process thermometer I stick in for the occasional temp check....
IF IT DOES NOT HAVE A TEMP THERMOSTAT DO NOT GET
Ed# _www.smecc.org_ (http://www.smecc.org) a baker since before it was
proper!
No thermostat. But the fact that it had no thermostat was not, of
itself, a deal breaker for me, as I have a PIC controller and UL listed
power controller that I use now. But between no thermostat and no fan,
I decided to take a pass, though the size was fine for the large 10.5"
mag tape reels.
JRJ
4:11 p.m.
On Sat, 29 Aug 2015, COURYHOUSE at aol.com wrote:
IF IT DOES NOT HAVE A TEMP THERMOSTAT DO NOT GET
So that we can remove it and put in a trustworthy one?
The commercial part is the housing, trays, lid (with adjustable vent).
Prefer transparent.
You can make your own, or buy something cheap to build a good one out of.
The HarborFreight one is barely usable for this unless/until you add a
thermostat, a fan, a timer, an extension cord, . . .
Were you looking for one that already has the desired enhancements?
I used one sorta like it 35 years ago (before HarborFreight was selling
one)
3403
days inactive
3403
days old
2 comments
3 participants
participants (3)
-
cisin＠xenosoft.com -
COURYHOUSE＠aol.com -
cube1＠charter.net