29 Aug
2015
29 Aug
'15
10:51 a.m.
I thought the center thing was a duct also Ed#
In a message dated 8/29/2015 8:45:57 A.M. US Mountain Standard Time,
nf6x at nf6x.net writes:
On Aug 29, 2015, at 08:00, Matt Patoray
<mspproductions at gmail.com>
wrote:
But the food dehydrator comes with multiple shelves, and you can cut the
center
support out of one of them. That is how I have modified mine to
accept 1" C format Videotape reels.
Oh, maybe I misunderstood, then. I thought the center support was some
sort of fixed air duct, and that anything too large to fit between the center
and edge would need a center hole large enough to fit over the center
support.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
29 Aug
29 Aug
11:04 a.m.
On Sat, 29 Aug 2015, COURYHOUSE at aol.com wrote:
I thought the center thing was a duct also Ed#
Baking diskettes in it would reduce the central ducting.
The HarborFreight food dehydrator (#66906 $30, currently sale at $25)
will work with the central ducting partially blocked.
It has a heating element. On the ones with an incandescent bulb, using a
CFL will reduce power consumption, but it doesn't do much drying/baking.
1:28 p.m.
On 8/29/2015 1:04 PM, Fred Cisin wrote:
On Sat, 29 Aug 2015, COURYHOUSE at aol.com wrote:
Ooooh. Thanks for the pointer to HarborFreight. I think I will pop
over to the store with a tape and see if they have one out to see if it
is suitable today or tomorrow.
JRJ
I thought the center thing was a duct also
Ed#
Baking diskettes in it would reduce the central ducting.
The HarborFreight food dehydrator (#66906 $30, currently sale at $25)
will work with the central ducting partially blocked.
It has a heating element. On the ones with an incandescent bulb, using
a CFL will reduce power consumption, but it doesn't do much drying/baking.
1:36 p.m.
> The HarborFreight food dehydrator (#66906 $30,
currently sale at $25)
> will work with the central ducting partially blocked.
On Sat, 29 Aug 2015, Jay Jaeger wrote:
Ooooh. Thanks for the pointer to HarborFreight. I
think I will pop
over to the store with a tape and see if they have one out to see if it
is suitable today or tomorrow.
ID is 12.5"
So, it would hold up to about 8.75" square
If you're going to use it regularly, consider adding a fan.
3:23 p.m.
On 8/29/2015 3:36 PM, Fred Cisin wrote:
I went over and had a look at it. As you mention, it has no fan at all.
Size looked OK, and the heating element looked OK (it is not just a
light bulb). No thermostat at all. All told, I decided to pass it up.
JRJ
> The
HarborFreight food dehydrator (#66906 $30, currently sale at $25)
> will work with the central ducting partially blocked.
On Sat, 29 Aug 2015, Jay Jaeger wrote:
Ooooh. Thanks for the pointer to HarborFreight.
I think I will pop
over to the store with a tape and see if they have one out to see if it
is suitable today or tomorrow.
ID is 12.5"
So, it would hold up to about 8.75" square
If you're going to use it regularly, consider adding a fan.
3177
days inactive
3177
days old
5 comments
4 participants
participants (4)
-
ard＠p850ug1.demon.co.uk -
cisin＠xenosoft.com -
COURYHOUSE＠aol.com -
cube1＠charter.net