25 Sep
2015
25 Sep
'15
2:48 p.m.
From: tony duell
2 of said feet got bent at right-angles (!)
Hammer them straight, and clean up the threads with a die. Those outriggers
are unobtainium, so I can't imagine the feet are much better.
switch mechanisms for the PDP11/45 front panel. I have
the toggles
(thankfully), I need the switches
Now you're really into unobtainium territory. We've been moaning about the
inability to find these for a while now. All the early 11's (except the
11/20) use these - 11/05, 11/40, 11/45, etc - and a bunch of us need them,
but nothing doing.
Noel
25 Sep
25 Sep
7:23 p.m.
On 09/25/2015 04:48 PM, Noel Chiappa wrote:
Umm, actually, there is a large industrial business in
making equipment/furniture feet. You can get these sorts of
metal or nylon feet with threaded posts from several
manufacturers. (Now, I can't think of the names off the top
of my head.) You will even find a few of them in a good
hardware store. You might check outfits like MSC that sells
a lot of machine tool supplies. Also Carr-Lane has them,
under "leveling feet".
Jon
From: tony
duell
2 of said feet got bent at right-angles (!)
Hammer them straight, and clean up the threads with a die. Those outriggers
are unobtainium, so I can't imagine the feet are much better.
26 Sep
26 Sep
4:41 a.m.
2 of said feet
got bent at right-angles (!)
Hammer them straight, and clean up the threads with a die. Those outriggers
are unobtainium, so I can't imagine the feet are much better. switch
mechanisms for the PDP11/45 front panel. I have the toggles
(thankfully), I need the switches
Now you're really into unobtainium territory. We've been moaning about the
inability to find these for a while now. All the early 11's (except the
11/20) use these - 11/05, 11/40, 11/45, etc - and a bunch of us need them,
but nothing doing.
3375
days inactive
3376
days old
2 comments
3 participants
participants (3)
-
ard＠p850ug1.demon.co.uk -
elson＠pico-systems.com -
jnc＠mercury.lcs.mit.edu