My concern is in any software that isn't the RT-11 Operating System.
Specifically any DEC Layered Products or 3rd Party applications.
This might be a good time to mention I'm still trying to find a copy of
DECnet for RT-11. I am also looking for copies of SPD's that show what
versions of layered products go with which versions of DEC OS's
(specifically PDP-11 and PDP-10 OS's).
Of the list below, these are the bits besides one of the cards in the 1st
system (the Codar card) that I find interesting. The 9-Track's should
potentially go to Al or Tim to read in. I don't know if the RT-11 SIG tapes
have been archived (are these copies of what Tim has made CD's of?). The
"Floppy Media" needs to be inventoried.
> DECUS RT-11 SIG tapes (9-track)
>
> Many boxes of DEC-related hardware and supplies:
> "Floppy media -- RX02, RX33, RX50"
>
> DEC Option Module list in 3" binder
Zane
On Tue, 29 Sep 2009, Jerome H. Fine wrote:
I left the inventory list in case someone missed it
the first time.
For myself, I have so much surplus PDP-11 hardware that my problem is very
similar. It also must eventually go, although my time frame is years rather
than
days.
Even for the RT-11 distributions, they would be useful only to check that
there
are no errors in the same distributions that I have access to. In the past,
I have
noticed that in some cases, two distributions of the same version can be
different.
If anyone else does acquire the RT-11 distributions, I would be interested in
making a comparison.
Sincerely yours,
Jerome Fine
Lyle Bickley wrote:
As was previously reported long-time RT-11 and
PDP-11 fan,
Robert C. Peckham passed away recently. He left a significant
inventory of PDP-11 and related stuff in Glendale, California.
I just got off the phone with Alan Frisbie, who is helping
the widow sort out Robert's collection. Alan contacted
a number of folks regarding the collection, but so far
no one has responded to the need to purchase and/or pick
up this stuff.
Everything has to be moved out of Robert's office by
Thursday, October 1. Alan said that he will be renting
a storage unit temporarily in an attempt to save the
historically valuable items - unless someone picks it
up before then. It appears that much will be going into
the dumpster.
Please contact Alan ASAP if you are available to help.
His address and phone numbers follow the inventory
"The family is left with a mountain of medical and other
bills, they would appreciate reasonable offers for this
equipment. They would like to have everything go to good
homes, where it will be used and appreciated, rather than to
a dealer who will break it up and sell it."
Regards,
Lyle
---------- Inventory as of 27-Sep-2009 ----------
Two complete Q-Bus PDP-11 systems belonging to the late
Bob Peckham, plus lots of miscellaneous PDP-11 related parts
and supplies.
Note: The system disks were removed and destroyed by order of
his family and attorney to protect confidential client data.
System #1
Rack 1 DEC H967 (42" high) rack with H874-A power controller
Empty generic 5-1/4" Chassis
DEC 11/23-BC (BA11-S) Chassis containing:
M8192-YB PDP-11/73 CPU
M7551-AB MSV11 1MB memory
M8043 DMV11 DDCMP (DECnet) communications card
M8047 MXV11 multi-function card
M7516-YM DELQA Ethernet card
M9047 Dual-height bus grant card
M8029 RXV21 controller for RX02 floppy disks
Quad-height bus grant card
M9404-YA Q-Bus expansion card
DEC 11/23 (BA11-S) Expansion Chassis containing:
M9405-YA Q-Bus expansion card
M3104 DHV11 4-line serial multiplexer
Dual-height bus grant card
Dilog (model?) tape drive controller (for below drive)
Quad-height bus grant card
Andromeda ESDC disk controller for ESDI & floppy drives
Andromeda SCDC disk controller for SCSI & floppy drives
Quad-height bus grant card
Codar Technology model 102 Q-Timer & boot card
DEC 11/23-BC (BA11-S) Expansion Chassis containing:
Load Board (power resistors)
M3104 DHV11 4-line serial multiplexer
Fujitsu Power supply (not hooked up)
+5 @ 11A
+24 @ 5A
-12 @ 5A
5-1/4" generic chassis containing:
5-1/4" floppy disk drive (not hooked up)
Rack 2 DEC H967 (42" high) rack with Pulizzi power controller
RX02 dual 8" floppy disk subsystem
Cipher M891340-96-1050U 1600/3200 bpi tape drive
System #2
DEC "11V23" rack (31" high) w/power controller containing:
DEC "DPM23 (BA11-SA) Chassis containing:
M8637-EF 2MB memory
M8190-AE PDP-11/83 CPU board
M9047 Dual-width grant card
M8043 DLV11-J 4-port serial card
M9047 Dual-width grant card
M7516-YM DELQA Ethernet card
M9047 Dual-width grant card
Andromeda SCDC disk controller for SCSI & floppy drives
DEC BA11-N Chassis containing:
M8192 PDP-11/73 CPU
M7551-AC MSV11-QA memory
(three blank slots)
Andromeda ESDC disk controller for ESDI & floppy drives
(three blank slots)
Additional PDP-11 related equipment, documentation, and supplies:
Many DEC rack filler panels, both BA11-S style (metal
w/rounded top & bottom) and 10" black plastic
DEC BA42A SZ12X-MA SCSI/floppy expansion box
VT320 w/LK207-EE with KED/EDT keycaps
VT320 w/LK201 with KED/EDT keycaps
Two DEC LA120 DECwriter-III printing terminals
Three Diablo 630 Daisywheel printers (one New-In-Box)
Two Clary DT1500 Uninterruptable power systems (UPS)
Topaz Line-2 power conditioner
Two MultiTech Multi-modem MT1432-BA (300 - 14,400 bps)
MultiTech Multi-modem MT2834-BA
RT-11 v5.2/5.4 documentation set
RT-11 v5.6 documentation set
DEC M8029 RXV21 controller for RX02 floppy disks
Andromeda ESDC disk controller for ESDI & floppy drives
Two DEC M8637-E 2MB memory boards
Two DEC H9270 Backplanes
Dual RX02 drives in chassis (NIB -- New In Box!)
Three spare RX02 drives (in original boxes)
Two VT1XX-CE DECword conversion kits for VT100
Three VT1XX-FB Anti-Glare kits for VT100
Fujitsu M2263E full-height 5-1/4" hard disk drive
DEC RT-11 Distribution kits (v4.0 - v5.6)
DECUS RT-11 SIG tapes (9-track)
Many boxes of DEC-related hardware and supplies:
"Floppy media -- RX02, RX33, RX50"
"DEC Special parts & cables"
"DEC Flat cables"
"XXDP Listings from fiche"
"DEC Cables & cords"
"DEC MMJ Cables & fittings"
much more, too much to list
DEC Option Module list in 3" binder
Three 6' Wright Line cabinets with roll-up doors:
#1 Three tape hangers, two fixed shelves
#2 4 fixed shelves, 1 roll-out shelf, 1 drawer
#3 6 fixed shelves, 1 roll-out shelf
Three New-In-Box (on pallets) Stantron 19" racks, on
wheels. 21" panel height, 32" overall height, dark
wood-grain laminate tops.
Many 19" rack panels (plain & ventilated), shelves, rack
slides, etc. Most brand new.
Plus lots more PDP-11 Q-Bus chassis, backplanes, power supplies,
and miscellaneous stuff in a large room we have not yet explored.
There are more boxes and two more Wright Line cabinets filled
with DEC stuff at Bob's house which we have not yet explored.
We also expect to find more disk drives and ???? when we open
his storage unit.
Feel free to contact me by e-mail, or telephone me at the below
numbers.
Sincerely,
Alan E. Frisbie
-- Flying Disk Systems, Inc. 323-256-2575 (office)
-- 4759 Round Top Drive 213-718-1635 (cellular)
-- Los Angeles, CA 90065