9 Nov
2007
9 Nov
'07
12:25 p.m.
hello all,
i have an SGI indigo2 which ive installed a 2GB IBM hard drive in. however,
from a cold boot, i receive a drive/cable error, and it
asks me to press any
key to continue. when i do, i press start system and it all
comes to life.
im assuming it takes longer for the drive to spin up than the indigo2 takes
to wait for the drive. is there a way to adjust this? thanks
10 Nov
10 Nov
11:35 a.m.
On 11/9/07, joe lobocki <jlobocki at gmail.com> wrote:
hello all,
i have an SGI indigo2 which ive installed a 2GB IBM hard drive in. however,
from a cold boot, i receive a drive/cable error, and it asks me to press any
key to continue. when i do, i press start system and it all comes to life.
im assuming it takes longer for the drive to spin up than the indigo2 takes
to wait for the drive. is there a way to adjust this? thanks
Hi Joe - if no one here can answer your question, and you have Usenet
access, it looks like comp.sys.sgi.hardware is still somewhat active.
I've gotten help there (albeit years ago.) Then again its readership
may be mostly people from this list :)
--
jht
11:42 a.m.
You can also try <http://www.nekochan.net>
--
"The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
<http://www.xmission.com/~legalize/book/download/index.html>
Legalize Adulthood! <http://blogs.xmission.com/legalize/>
6748
days inactive
6749
days old
2 comments
3 participants
participants (3)
-
jlobocki＠gmail.com -
legalize＠xmission.com -
silent700＠gmail.com