1 Apr
2019
1 Apr
'19
2:02 p.m.
Hey all --
Trying to track down technical info for a Dilog DQ100 controller. This is
a QBus controller compatible with the RK11 (or RKV11, in this case) that
works with various RK05-compatible drives. (See the brochure here:
http://www.bitsavers.org/pdf/dilog/brochures/DQ100_Brochure_Aug1980.pdf)
At minimum, I'd like to know the connector pinout so that I might wire up a
Diablo 31 to it.
Thanks as always,
Josh
1 Apr
1 Apr
2:20 p.m.
I have a board and cable. It should match up with the 40 pin cable pinout
on the Alto. Will double-check it tonight.
On 4/1/19 2:02 PM, Josh Dersch via cctalk wrote:
Hey all --
Trying to track down technical info for a Dilog DQ100 controller. This is
a QBus controller compatible with the RK11 (or RKV11, in this case) that
works with various RK05-compatible drives. (See the brochure here:
http://www.bitsavers.org/pdf/dilog/brochures/DQ100_Brochure_Aug1980.pdf)
At minimum, I'd like to know the connector pinout so that I might wire up a
Diablo 31 to it.
Thanks as always,
Josh
2:21 p.m.
rats, after I sent that I remembered it is a Xylogics, not a Dilog
On 4/1/19 2:20 PM, Al Kossow via cctalk wrote:
I have a board and cable. It should match up with the
40 pin cable pinout
on the Alto. Will double-check it tonight.
On 4/1/19 2:02 PM, Josh Dersch via cctalk wrote:
Hey all --
Trying to track down technical info for a Dilog DQ100 controller. This is
a QBus controller compatible with the RK11 (or RKV11, in this case) that
works with various RK05-compatible drives. (See the brochure here:
http://www.bitsavers.org/pdf/dilog/brochures/DQ100_Brochure_Aug1980.pdf)
At minimum, I'd like to know the connector pinout so that I might wire up a
Diablo 31 to it.
Thanks as always,
Josh
9:21 p.m.
Ah, bummer. Thanks for checking, though!
On Mon, Apr 1, 2019 at 2:40 PM Al Kossow via cctalk <cctalk at classiccmp.org>
wrote:
rats, after I sent that I remembered it is a Xylogics,
not a Dilog
On 4/1/19 2:20 PM, Al Kossow via cctalk wrote:
I have a board and cable. It should match up with
the 40 pin cable pinout
on the Alto. Will double-check it tonight.
On 4/1/19 2:02 PM, Josh Dersch via cctalk wrote:
> Hey all --
>
> Trying to track down technical info for a Dilog DQ100 controller. This
is
> a QBus controller compatible with the RK11
(or RKV11, in this case) that
> works with various RK05-compatible drives. (See the brochure here:
> http://www.bitsavers.org/pdf/dilog/brochures/DQ100_Brochure_Aug1980.pdf
)
>
> At minimum, I'd like to know the connector pinout so that I might wire
up
a
Diablo 31
to it.
Thanks as always,
Josh
2090
days inactive
2091
days old
3 comments
2 participants
participants (2)
-
aek＠bitsavers.org -
derschjo＠gmail.com