29 Mar
2005
29 Mar
'05
1:03 p.m.
Hi,
I just found two small lamps in a HP packaging and was wondering if someone
knew for which system these are ?
Part number is 2140-0203 and the text on it says LAMP, INCAND. 5V
Written with a marker on the packag is STICKER LAMP and LOAD POINT
Anyone any idea's ? It came with a bunch of HP1000 items.
Stefan.
-------------------------------------------------------
http://www.mansier.net
29 Mar
29 Mar
1:29 p.m.
Stephan wrote...
Part number is 2140-0203 and the text on it says LAMP,
INCAND. 5V
Written with a marker on the packag is STICKER LAMP and LOAD POINT
Anyone any idea's ? It came with a bunch of HP1000 items.
I have not taken the
time to look up these part numbers yet, but my guess
would be lamps for the pushbuttons in a 7970 tape drive, and perhaps the
load point tape sensor?
Jay West
2:08 p.m.
On Tue, 29 Mar 2005, Jay West wrote:
Stephan wrote...
Spot on. Photosense Head PCA, page 79:
http://bitsavers.vt100.net/hp/tape/07970-90886_7970drws_Nov76.pdf
The display lamps are 2140-0209 (14V).
Mike Loewen mloewen at cpumagic.scol.pa.us
The Dixie Lion Jazz Band http://ripsaw.cac.psu.edu/dixie.html
The B9 Robot Builders Club B9-0014 http://ripsaw.cac.psu.edu/~mloewen/B9/
Old Technology http://ripsaw.cac.psu.edu/~mloewen/Oldtech/
Part number is 2140-0203 and the text on it says
LAMP, INCAND. 5V
Written with a marker on the packag is STICKER LAMP and LOAD POINT
Anyone any idea's ? It came with a bunch of HP1000 items.
I have not taken the
time to look up these part numbers yet, but my guess
would be lamps for the pushbuttons in a 7970 tape drive, and perhaps the load
point tape sensor? 
3:49 p.m.
On 29 Mar 2005 at 23:03, Stefan wrote:
Part number is 2140-0203 and the text on it says LAMP,
INCAND. 5V
Written with a marker on the packag is STICKER LAMP and LOAD POINT
The HP 1000 "CE Handbook" says that this is the "photo sense" lamp for
a
7970B/E tape drive (i.e., the BOT/EOT reflective sensor). See page 71-1
of:
http://www.bitsavers.org/pdf/hp/1000/5950-3767_M-E-F_CEhbk_Jul84.pdf
-- Dave
30 Mar
30 Mar
2:50 a.m.
Ahaaa :-) Not that I have any use for them though, so if anybody wants
them, they are available for swap.
Stefan.
At 01:49 30-3-2005, you wrote:
On 29 Mar 2005 at 23:03, Stefan wrote:
-------------------------------------------------------
http://www.oldcomputercollection.com
Part number is 2140-0203 and the text on it says
LAMP, INCAND. 5V
Written with a marker on the packag is STICKER LAMP and LOAD POINT
The HP 1000 "CE Handbook" says that this is the "photo sense" lamp for
a
7970B/E tape drive (i.e., the BOT/EOT reflective sensor). See page 71-1
of:
http://www.bitsavers.org/pdf/hp/1000/5950-3767_M-E-F_CEhbk_Jul84.pdf
-- Dave 
3:54 p.m.
Hmm, 2114's, 2115's, and 2115's all use higher voltage lamps for their
front panels.
I'm stumped on where a 5-volt bulb would be used, unless its the small
solder
in bulb that goes on the parity error option for a 2116.
----- Original Message -----
From: "Stefan" <birs23 at zeelandnet.nl>
To: <cctalk at classiccmp.org>
Sent: Tuesday, March 29, 2005 4:03 PM
Subject: HP Lamps
Hi,
I just found two small lamps in a HP packaging and was wondering if
someone knew for which system these are ?
Part number is 2140-0203 and the text on it says LAMP, INCAND. 5V
Written with a marker on the packag is STICKER LAMP and LOAD POINT
Anyone any idea's ? It came with a bunch of HP1000 items.
Stefan.
-------------------------------------------------------
http://www.mansier.net
6989
days inactive
6990
days old
5 comments
5 participants
participants (5)
-
birs23＠zeelandnet.nl -
bshannon＠tiac.net -
jdbryan＠acm.org -
jwest＠classiccmp.org -
mloewen＠cpumagic.scol.pa.us