On my final trip to The Black Hole, I picked up some more Tektronix documentation. One of these was a photocopy of the manual for the 4953/4954 Graphics Tablet. This manual combines the instruction and service manual in one with circuit diagrams and descriptions in the back of the manual. However, since this was a photocopy and not an original, the circuit diagrams were not available in their original size. The person who photocopied the manual had attempted to cover the diagrams with multiple photocopies of different parts of the oversize page. It was difficult to manually match up the different pages, if only just to identify the order in which they should appear in a scanned PDF of the manual. Instead I just fed the scans into Microsoft ICE, available as a free download: Microsoft ICE (Image Composite Editor) <http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/> The results speak for themselves. See the last three pages of the resulting PDF: <http://bitsavers.trailing-edge.com/pdf/tektronix/49xx/070-1791-01_4953_4954_Graphics_Tablet_Instruction_Manual_Jun_1980.pdf> You can see that the person who photocopied the manual did miss a few bits of the schematics, but for the most part the schematic is now legible as a single diagram. Due to the blending that occurs at the edges of the individual images, Microsoft ICE will sometimes produce a grayscale image from the bilevel scans I use for making PDFs of manuals. So a little post processing in ImageMagick reduced the bit depth back down to 1 bit per pixel and converted the image to PDF for combining with the rest of the pages via pdftk. The command stream went roughly like this: convert composite.tif -monochrome -compression Group4 page.tif convert page.tif -density 600x600 page.pdf The -density argument tells the PDF file that the image was scanned at 600 dpi so that the composite page is shown at the same relative size to the other pages in a PDF viewer. It may be possible to combine these two commands into a single invocation of ImageMagick with identical results; I haven't tried that. I had previously used hugin, an open source image compositing program that has tutorials for compositing multiple scans like this. However, using hugin to do the same job was a very tedious, laborious and lengthy process. With MS ICE, it was a simple matter of drag-n-drop of the image files onto the application which it processed automatically to find the resulting composite. -- "The Direct3D Graphics Pipeline" free book <http://tinyurl.com/d3d-pipeline> The Computer Graphics Museum <http://computergraphicsmuseum.org> The Terminals Wiki <http://terminals.classiccmp.org> Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>