23 Feb
2022
23 Feb
'22
3:12 p.m.
Does anyone have anything on the jumper settings for this drive?
I would like to jumper it so it can read DEC RX01/RX02 floppies.
I am looking at being able to read disks on a non-DEC systems
but I would also like to be able to use it on my Andromeda card
in a real PDP-11.
bill
23 Feb
23 Feb
10:09 p.m.
P 1-17 of the Service Manual
m
On Wed, Feb 23, 2022 at 6:13 PM Bill Gunshannon via cctalk <
cctalk at classiccmp.org> wrote:
Does anyone have anything on the jumper settings for this drive?
I would like to jumper it so it can read DEC RX01/RX02 floppies.
I am looking at being able to read disks on a non-DEC systems
but I would also like to be able to use it on my Andromeda card
in a real PDP-11.
bill
4:51 a.m.
On 24 Feb 2022, at 12:21, Bill Gunshannon via cctalk
<cctalk at classiccmp.org> wrote:
On 2/24/22 01:09, Mike Stein wrote:
This is the one I have, it covers both -1 and -2 since they're the same board, only
the number of heads is different.
https://binarydinosaurs.co.uk/TandonTM848ServiceGuide.pdf
<https://binarydinosaurs.co.uk/TandonTM848ServiceGuide.pdf>
Cheers,
--
Adrian Graham
Owner of Binary Dinosaurs, the UK's biggest private home computer collection?
t: @binarydinosaurs f: facebook.com/binarydinosaurs
w: www.binarydinosaurs.co.uk
P 1-17 of the Service Manual
What manual? I understand the one on bitsavers is for the
848 and not the 848-02 which has a completely different logic
board. Have I been misinformed?
4:54 a.m.
On 2/24/22 07:51, Adrian Graham via cctalk wrote:
Thank you I grabbed it. Should be a big help.
bill
On 24 Feb 2022, at 12:21, Bill Gunshannon via
cctalk <cctalk at classiccmp.org> wrote:
On 2/24/22 01:09, Mike Stein wrote:
This is the one I have, it covers both -1 and -2 since they're the same board, only
the number of heads is different.
https://binarydinosaurs.co.uk/TandonTM848ServiceGuide.pdf
<https://binarydinosaurs.co.uk/TandonTM848ServiceGuide.pdf>
P 1-17 of the Service Manual
What manual? I understand the one on bitsavers is for the
848 and not the 848-02 which has a completely different logic
board. Have I been misinformed? 
1 Mar
1 Mar
3:57 a.m.
Page #14 of:
http://www.bitsavers.org/pdf/tandon/TM848-1_TM-848-2_Product_Specification_…
Unless "-02" is different than "-2" ...
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Bill Gunshannon via
cctalk
Sent: Wednesday, February 23, 2022 6:13 PM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Tandon TM 848-02
Does anyone have anything on the jumper settings for this drive?
I would like to jumper it so it can read DEC RX01/RX02 floppies.
I am looking at being able to read disks on a non-DEC systems but I would also like to be
able to use it on my Andromeda card in a real PDP-11.
bill
1026
days inactive
1032
days old
5 comments
4 participants
participants (4)
-
bill.gunshannon＠hotmail.com -
binarydinosaurs＠gmail.com -
mhs.stein＠gmail.com -
pbirkel＠gmail.com