24 Feb
2018
24 Feb
'18
5:30 a.m.
So, all this talk about panels made me making an oak frame for an
IBM panel I had lingering around in the attic for a while.
Still need to make a back panel to close it tough.
http://bit.ly/2HI2cHC
The cables were already cut when I got it.
Ed
--
Ik email, dus ik besta.
25 Feb
25 Feb
5:22 p.m.
Pretty!
Marc
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of "cctalk at
classiccmp.org" <cctalk at classiccmp.org>
Reply-To: <ed at groenenberg.net>, "cctalk at classiccmp.org" <cctalk
at classiccmp.org>
Date: Saturday, February 24, 2018 at 5:30 AM
To: "cctalk at classiccmp.org" <cctalk at classiccmp.org>
Subject: ibm panel
So, all this talk about panels made me making an oak frame for an
IBM panel I had lingering around in the attic for a while.
Still need to make a back panel to close it tough.
http://bit.ly/2HI2cHC
The cables were already cut when I got it.
Ed
--
Ik email, dus ik besta.
5:56 p.m.
Well done, tasteful.
I was very lucky with who ever scrapped that 360/50 and took the hinge and
frame along with the panel.
One then can anchor the frame to the studs or something and not have to
worry about how the heck one
is going to hang a 75 lb or whatever panel to the wall.
-pete
On Sat, Feb 24, 2018 at 5:30 AM, E. Groenenberg via cctalk <
cctalk at classiccmp.org> wrote:
So, all this talk about panels made me making an oak frame for an
IBM panel I had lingering around in the attic for a while.
Still need to make a back panel to close it tough.
http://bit.ly/2HI2cHC
The cables were already cut when I got it.
Ed
--
Ik email, dus ik besta.
2258
days inactive
2260
days old
2 comments
3 participants
participants (3)
-
curiousmarc3＠gmail.com -
ed＠groenenberg.net -
pete＠petelancashire.com